W2390
1982/2008 37′ x 11′ Work Boat/Pleasure Trawler
-
- Price: $35,000 CDN
- Draft 3.5′
- 3/16″ Steel formed hull (imitation lapstrake appearance), aluminum superstructure
- Open stern deck space 10′ x 8.5′
- Powered by John Deere 466 TD, 250 hp, 5000 hours
- Cruises at 9.6 knots
- Twin Disc 509 2.75:1
- Trolling Gear 5:1
- Prop is 30 x 28, 2″ shaft
- Fuel capacity 300 gal, Consumption 3 gph @ 1500 rpm
- 6 kw generator powered by 3 cyl Perkins
- Electronics: 2 radios, radar, depth sounder, Loran C, compass
- Auto pilot by ComNav
- Hydraulic steering
- 12V anchor winch
- Bus heater
- Fresh water capacity 100 gal
- Holding tank capacity 50 gal
- 3 Bilge pumps: 2 – 12V, 1 – manual
- Accommodations – Forward v-berth, Head with shower and sink, 120 V stove (or alcohol), galley sink
- 12 V solar battery charger
- 110 V hot water tank with heat also from motor
- Propane BBQ, Swim Platform
- Steel davit with hand winch
- Overall good condition
- Weight 18,000 lbs
- Last survey 2019
- Location: Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2392
1987 50′ x 14′ x 3′ Steel Work Boat/Cargo Tug
-
- Price: $35,000 USD
- Powered by 2 6-71 Detroits
- Cargo hold 12′ x 28′, capacity 38,700 lbs
- Fuel capacity: 600 gal
- 2 manual deck winches
- Vessel needs: a new deck in cargo hold, haul out and fresh bottom paint
- Location: South Carolina
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
T2410
1939 98’7 x 22′ x 9′ 1200 hp Tug
- Price: $250,000 USD
- GRT: 132, NRT 49
- Built in Port Arthur, Texas by Gulfport Boiler & Welding
- Powered by EMD 12-567, 1200 hp, 5 hours since rebuild
- Fuel capacity: 60,000 litres
- Fuel consumption: 20 gph
- Fresh water capacity: 20,000 litres
- Holding tank capacity: 2,000 litres
- Generator: 3-71 Detroit
- Electronics: radio, GPS, radar, direction finder, compass, joy stick steering
- 4 1/2″ shaft, new 96″ stainless prop
- Bilge pumps: 3 electric
- Accommodations: sleeps 4, galley, 1 head
- Oil furnace
- Ready to go
- Located: Northern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2391
2020 17′ x 5’6 Steel Work Boat – New Build
-
- Price: $7,000 CDN or best offer
- 32″ deep
- 12 gauge hull, 10 gauge transom
- 2″ x 3″ rub rail
- 2 1/2″ pipe perimeter cap
- Suitable for up to 70 hp outboard
- Location: Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2383
2020 24’6 x 9′ Steel Work Boat w/Wheelhouse – BUILT TO ORDER
-
- $22,500 CDN•Out board motor may be available at extra cost
•Hydraulic steering
•Boat is 9′ wide at max, 8′ wide deck
•15′ of deck ahead of wheelhouse
•4″ pipe side cap
•(2) 4″ spud pockets aft
•10 gauge construction
•Light freeboard 9″ forward, 5″ aft
•6’8″ headroom in wheelhouse
•Located in Port Dover
File Ref W2383
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2381
1998 21′ x 7’6″ Aluminum Work Boat w/Trailer
-
- Price: $14,500 CDN
- Inboard/outboard, 4 cylinder Mercruiser engine 130hp
- Mercruiser outdrive
- Located in Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
