1992 21′ x 8′ Modified SeaArk Aluminum Work Boat – Engine Needs Repair
- Price: $17,500 USD
- Note: The engine on this work boat needs to be repaired
- Last used June 2024
- Hull is SeaArk, cabin was added
- Engine is a Volvo AD41B, 200hp, 1992 with less than 1000 hours on it
- Located in Michigan
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
C2076
1993 30′ x 11′ Hike Aluminum Crew/Dive/Work Boat w/ Built-in Commercial Diving System
-
- NEW PRICE: $125,000 USD
- This versatile Hike boat with great lines is in great shape, has no corrosion, and has been in fresh water her entire life
- Built by Hike Metal in Wheatley, Ontario
- Draft: 2′
- Powered by Twin Volvo Penta 7.4 GI 310 hp each
- Starboard engine was replaced in 2014
- Cruises at 18-19 knots, fuel consumption 16 gph
- Twin 100 gal fuel tanks for 200 gal total fuel capacity
- Shell plate thickness 1/4″
- Large stern deck approx 11′ x 12′ with fold down transom
- Headroom is approximately 6’8
- Heated cabin
- Suspension/shock seats
- V-berth for 2
- 4 compartments providing lots of storage
- Electronics: Raytheon radar, Icom radios, Garmin GPS, Depth Sounder, Isolation transformer
- Battery Charger: Charles 93-IMC60-A
- Building the diver breathing air compressor, generator, volume tank, emergency gas cylinders, diesel fuel tank etc. into the machinery space under the deck gives you an open deck for auxiliary equipment materials etc. An unobstructed work area that would normally be occupied by the diving equipment.
- Modifications and Built-in custom Commercial Dive Station
- Generator: Northern Lights M733 9 ~ in sound shield
- Air Compressor: Powerex Model 0BS050716.7 SCFM @ 100 PSI, 5 hp Three phase through a Yaskawa V1000, Variable frequency drive
- High Pressure Air System: Three (3) Kaplan Industries 250 CF high pressure steel cylinders banked together
- Low Pressure Air Tank: 30 gal steel receiver only Campbell Hausfeld DWG AR8028
- Diver Air System: Custom Design and Fabrication (Arnie Monk)
- Deck Crane: Western Mule M2000
- Location: New Jersey
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
B2389
2017 Aluminum Sectional Barge – 37’11 x 16’6 x 3’8
- SOLD!
- This 2 section barge is built to the highest spec, is stackable, truckable and ready for your next project.
- Accessories on deck are easily removed, making the sections stackable
- Made in the USA
- Shell plate thickness: 1/4″ hull, 3/8″ deck
- Draws 18″ empty
- Each section has:
- 4 hatches – 2 on deck, 2 below water line
- 1 bulkhead midship
- 6 lifting lugs per barge, lifting lugs run all the way through the hull
- heavy duty framing
- runners running the length of each section
- tow points
- rubber fendering on front rake
- Stainless pins are 1 1/2″ diameter
- Sections pin at top and bottom for extra strength in a variety of sea conditions
- Weight of each section is 12,000 lbs
- Capacity: at least 10 tons
- Location: Eastern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
