E2781
Cummins NH-250-M Marine Engine (removed from tug Dec 2024)
- Price:$3,675 CDN
- Good Running Take Out
- Removed from 50′ tug in December 2024
- Located in Southern Ontario
Details re deemed to be correct but are not guaranteed and should be independently verified. .
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
W2423
1995 19′ x 8’6 SeaArk Aluminum Work Boat
- Price: $30,000 USD
- She’s a small boat with a big heart and ready to get to work!
- 18″ draft
- Mercruiser 5.0 MPI, 260 hp
- VHF radio
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2425
1988 28′ x 8’6 Aluminum Work/Crew Boat
- Price: $35,000 USD
- Runs and drives
- 3′ draft
- Twin Mercruiser 5.7 MPI
- Bravo 2 outdrives
- Electronic shifters
- Dual steering stations (flybridge and cabin)
- Push knee
- Needs bottom paint
- Cruises at 30 mph
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
1992 21′ x 8′ Modified SeaArk Aluminum Work Boat – Engine Needs Repair
- Price: $17,500 USD
- Note: The engine on this work boat needs to be repaired
- Last used June 2024
- Hull is SeaArk, cabin was added
- Engine is a Volvo AD41B, 200hp, 1992 with less than 1000 hours on it
- Located in Michigan
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
C2076
1993 30′ x 11′ Hike Aluminum Crew/Dive/Work Boat w/ Built-in Commercial Diving System
-
- NEW PRICE: $125,000 USD
- This versatile Hike boat with great lines is in great shape, has no corrosion, and has been in fresh water her entire life
- Built by Hike Metal in Wheatley, Ontario
- Draft: 2′
- Powered by Twin Volvo Penta 7.4 GI 310 hp each
- Starboard engine was replaced in 2014
- Cruises at 18-19 knots, fuel consumption 16 gph
- Twin 100 gal fuel tanks for 200 gal total fuel capacity
- Shell plate thickness 1/4″
- Large stern deck approx 11′ x 12′ with fold down transom
- Headroom is approximately 6’8
- Heated cabin
- Suspension/shock seats
- V-berth for 2
- 4 compartments providing lots of storage
- Electronics: Raytheon radar, Icom radios, Garmin GPS, Depth Sounder, Isolation transformer
- Battery Charger: Charles 93-IMC60-A
- Building the diver breathing air compressor, generator, volume tank, emergency gas cylinders, diesel fuel tank etc. into the machinery space under the deck gives you an open deck for auxiliary equipment materials etc. An unobstructed work area that would normally be occupied by the diving equipment.
- Modifications and Built-in custom Commercial Dive Station
- Generator: Northern Lights M733 9 ~ in sound shield
- Air Compressor: Powerex Model 0BS050716.7 SCFM @ 100 PSI, 5 hp Three phase through a Yaskawa V1000, Variable frequency drive
- High Pressure Air System: Three (3) Kaplan Industries 250 CF high pressure steel cylinders banked together
- Low Pressure Air Tank: 30 gal steel receiver only Campbell Hausfeld DWG AR8028
- Diver Air System: Custom Design and Fabrication (Arnie Monk)
- Deck Crane: Western Mule M2000
- Location: New Jersey
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
1966 35′ x 10′ Russel Brothers Work Boat – Project Boat
- Price: $15,000 CDN
- This Russel Brothers Hull #1232 might just be the project for you!
- GRT: 7.22, NRT: 5.73
- Vessel weighs about 37,000 lbs
- Cummins Diesel, rebuilt in 2017
- Prop is Superston 70, 34 x 33.5, RH, 4 blade
- Cable steering
- Original winch
- Fuel capacity 500 litre
- Bilge pumps
- Located in Quebec
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
1952 37’6 x 10′ Russel Brothers Work Boat – Needs Work
- Price: $22,000 CDN
- This Russel Brothers Hull #999 might just be the project you’ve been looking for!
- GRT: 7.64, NRT: 5.73
- Vessel weighs about 37,000 lbs
- Cummins Diesel, model NH 220M, 220 hp, 225 hours
- Prop is Osborne, 39 x 20, RH, 3 blade
- Cable steering
- Original winch
- Fuel tank is new and has 185 gal capacity
- Located in Quebec
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2417
2023 16’6 x 6′ Steel Workboat
- SOLD! YOU JUST MISSED IT!
- 12 gauge bottom, 14 gauge sides
- 20″ transom
- Epoxy primed and painted
- Makes the perfect little run-about!
- Located in Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
1992 28′ x 10.3′ MetalCraft Aluminum Crew/Dive/Work Boat w/Tri-Axle Aluminum Trailer
- New Price: $60,000 CDN
- She’s got tons of room and is ready for work or play!
- GRT: 9.89, NRT: 7.59
- Twin Volvo Diesels, AD31B, 130hp each, approx 1,000 hours
- Cruises at 20 – 25 knots
- Electronics: 2 VHF radios, GPS, sonar
- Accommodations: toilet and berth down forward
- Comes with tri-axle aluminum trailer
Located in Northern Ontario on Lake Huron
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index