Tag Archives: PERKINS

P2454

P2454

1983 30′ x 9′ Welded Steel Motor Boat Project Boat

Price: $9,500 CDN or Best Offer

  • This project boat has nice lines and loads of potential!
  • 3′ Draft
  • Built by Kettle Creek Boat Works, Port Stanley, Ontario, Hull #1
  • Registered tonnage: 4.5 tons
  • Engine is Perkins (1983) 4.108 51 hp diesel
  • Condition of propulsion system: not run in 8 years
  • Stainless fuel tank estimated 80 – 90 gal capacity
  • Shell plating is 3/16″ with 1/8″ on cabin sides and top
  • 2″ x 3/16″ flat bar ribs on 24″ centers
  • 1″ x 3/16″ flat bar longitudinal hull frames at 16″ centers
  • 12″ x 6″  I-beam keel with bolted on lead ballast
  • Structure has minimal pitting, hull is solid, very little surface rust
  • Custom stands included
  • Located in Amherstburg, Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index

         

W2438

 1999 48’10 x 13’7 Aluminum Twin Screw Commercial Fishing Boat/Work Boat w/Trailer

  • New Price: $200,000  CDN
  • Take a ride on the boat in VIDEO 1  and VIDEO 2
  • Click HERE to see a video of the boat in action
  • Previously Transport Canada approved
  • Stability book available
  • GRT: 20.23, NRT: 15.17
  • Draft approx 3′
  • Powered by twin Perkins M130C (2014), 130hp each, hours: 900 and 700
  • Fuel capacity: 693 litres
  • Holding tank capacity: 267 litres
  • Inverter: Tundra HD 2500
  • Electronics: VHF, depth sounder, compass
  • Hydraulic steering
  • Wabasco heater
  • Safety equipment: fire extinguisher, life ring, fire pump
  • Bilge pump
  • Deck wash pump
  • Accommodations for 4
  • Comes with trailer
  • This vessel has been on the hard since Fall of 2018 (Being sold by an estate)

Located in Dauphin, Manitoba

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

       

T2406

 T2406

 64′ x 18′  1100 hp Tug with Retractable Wheelhouse

New Price: $99,900 USD

  • With great lines and loads of power, she’s ready to go, go, go!
  • Modernized in the 1970’s with the addition of a retractable wheelhouse
  • Built in 1903 by Johnston Brothers of Ferrysburg, Michigan
  • Last survey 2012
  • 6′ draft
  • Double steel hull
  • Powered by Detroit 16-V149, 1100 hp
  • Twin Disc MG 540
  • Generators: 2 – 1 Perkins, 1 Detroit
  • Fuel capacity: 2000 gal
  • Lube oil capacity: 200 gal
  • Cruising speed 10 knots
  • Prop: 4 blade 76″ x 54″ turning a 6″ shaft
  • Good overall condition
  • Electronics: GPS, radio, depth sounder, compass
  • Accommodations, kitchen, no head
  • Location: New York State (Lake Ontario)
  • File Ref T2406

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

C2074

C2074

1969 29′ x 10.5′ Lafco Aluminum Crew Boat/Work Boat

    • SOLD!
    • Click for the video —> C2074 YouTube Video
    • Listen to her engine –> C2074 Engine
    • 3.5′ draft
    • Powered by Perkins Sabre, M265TI, 265 hp, 1235.12 hours
    • Cruising speed: 18 knots
    • Propeller is 3 blade, bronze, Michigan; shaft is 1 3/4″
    • Electronics: 2 x VHF, GPS, Depth sounder
    • Hydraulic steering
    • Fuel capacity: approx 78 gal
    • Consumption: approx 8-10 gph
    • 2 bilge pumps
    • Weighs approx 12,000 lb
    • Location: New York State
    • Trailer may be available for additional $

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636