Tag Archives: ONTARIO

2022 27’x 10′ Aluminum Crane Barge w/Trailer – JUST LISTED!

B2380

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

Price $20,000 CDN
Though her completion was cut short, this beauty is so close to being ready to go! Some elbow grease and your vision to customize the interior is all she needs to be loved for years to come.
The Peregrine’s topsides have been sanded and primed and paint is available for the final coat. The bottom has been sanded and primed and is ready for antifouling. The deck and house have been sanded and the deck is primed. Deck tread has been laid out, cut and is ready to install
27’3″ x 9’8″ with a 5′ draft
Welded aluminum racer/cruiser style
3/16″ hull, 1/8″ deck & house, 1/4″ keel
16hp Beta Marine B16 diesel engine (2019), professionally installed
Fuel capacity 100 gal (approx)
New electrical panel and LED lighting
New Levaq head and holding tanks for grey water and fuel (diesel)
New dead lights on cabin top
New quarter berth port light
Deck hardware including winches, handrails, 6 part mainsheet, traveler and wheel are removed to allow for painting
Stainless steel Bimini frame has been fabricated but will need new canvas prior to installation. Cushions are included.
Dual axle steel trailer included
Cat rig aluminum spars and Dacron sails, mild (stainless) wire rigging
40 gal hot water heater, 25 gal water tank
Holding tank capacity: 20 gal (approx)
Headroom: 6′
Shaft size: 1″
Weight: 5,000 lbs
Location: Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636 Fax 519-583-2189
Return to index

Price $6,000 CDN
Refurbishing this vessel was cut short and she’s ready for re-power and the custom interior you dream up!
35’8″ x 11’8″ with a 4’9″ draft
1/4″ shell plating
Welded steel, sloop rigged cruiser with a full keel and hard top
Spars and quad-axle steel trailer included
Headroom: 6′
Shaft size: 1″
Prop: bronze, 3 blade
No engine – ready for repower
Accommodations: 1 double v-berth, 2 single bunks in salon
Steering: single wheel, pedestal
GRT: 12.79, NRT: 12.17
Location: Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636 Fax 519-583-2189
Return to index

This beauty has been totally redone from 2019-2023 with incredible attention to detail. She’s ready to take you on your next adventure!
Draft is 3′
35′ length over all
Modified V hull, fast rough water boat
Fresh water boat
Welded aluminum construction, 1/4″ hull shell plating
Built by Cliff Richardson Boats Ltd., Meaford, Ontario; designed by Jim Wynn of Florida
Powered by 2 Chev 350 cubic inch V8 engines, Volvo 260A, 300 hp each, 200 hours
Volvo Penta 280T outdrives
Fuel tanks: 2 x 55 gal
Cruising speed: 30 mph @ 3,200 rpm
Props are 16″ x 17″
Front spool windlass – electric 12 v
Electronics: VHF radio Uniden 25 watt, GPS is Lowrance 12 GPS, depth and side scanner, depth sounder is Hummingbird 4″, compass is Ritchie, steering is hydraulic
Fresh water capacity: 25 gal
Holding tank capacity: 50 gal
Accommodates 4-6
Head: enclosed head (pump), sink and shower
Inverter is digital – modified Sine Wave, 3,000 watt
2 bilge pumps
Weight of vessel 11,000 lb
Survey pending Spring 2023
Located in Southern Ontario