Category Archives: BARGES

B2389

***DEAL PENDING***
This 2 section barge is built to the highest spec, is stackable, truckable and ready for your next project.
Accessories on deck are easily removed, making the sections stackable
Made in the USA
Shell plate thickness: 1/4″ hull, 3/8″ deck
Draws 18″ empty
Each section has:
- 4 hatches – 2 on deck, 2 below water line
- 1 bulkhead midship
- 6 lifting lugs per barge, lifting lugs run all the way through the hull
- heavy duty framing
- runners running the length of each section
- tow points
- rubber fendering on front rake
Stainless pins are 1 1/2″ diameter
Sections pin at top and bottom for extra strength in a variety of sea conditions
Weight of each section is 12,000 lbs
Capacity: at least 10 tons
Location: Eastern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

B2389

BARGES

B2390

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

Competitively Priced
Compatible with Poseidon sectionals
Call for availability and pricing for:
- 10′ x 40′ x 5′ Barge Sections
- 10′ x 20′ x 5′ Barge Sections
- 10′ x 10′ x 5′ Rake Ends
- 32′ – 42′ Spuds and Spud Wells
- Diesel Spud Winches
These sectional barges are constructed from 50W grade steel, ensuring robust performance in a variety of marine environments
Each barge has an unloaded draft of 12″ making them easy to maneuver and deploy in shallow waters
Easily truckable
Modular design allows for flexible configurations to meet your requirements
Weight of 20′ Section: 15,000 lbs
Weight of 40′ Section: 27,000 lbs
Location: Eastern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

SOLD!
The fold-up sides on this handy crane barge make it truckable
Shell plate thickness 1/4″
Sides are 2.5′ high
Spuds are 6″ x 6″, 20′ long
Powered by 2 Mercury 150hp outboards (2013)
1 hatch, 3 bulkheads
Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
Crane has 3/8″ cable and at 37′ will pick 4,000 lb
Hydraulic steering
Location: Western Michigan