2021 25′ x 6’8 Steel & Aluminum Work Boat w/200 hp Evinrude and Trailer
- Price: $60,000 CDN
- This is the one you’ve been waiting for!
- Steel hull with aluminum pilot house and sole
- Draft is 6″
- Powered by 200 hp Evinrude E-TEC G2 outboard (2018), 90 hours
- Viper prop
- Cruises at 25 mph
- Electronics: GPS, Direction finder, Depth sounder, Compass
- Hydraulic steering
- Fuel capacity: 25 gallons
- Bilge pump
- Comes with new tandem trailer
Located near Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
1975 37’x 13′ Aluminum 600 hp Twin Screw Dive/Crew/Work Boat
- Price: $100,000 CDN
- Transport Canada compliant
- GRT: 14.99
- Draft 30″
- Built in Marinette, Wisconsin
- Construction is 3/16″ Aluminum
- Powered by Twin Caterpillar 3116 (1991), 670 hours, inspected by Toromont in 2021, 600 hp
- Cruising speed: 16 knots @ 2,000 rpm
- Gears are ZF 1.57:1
- Fuel capacity: 2 x 100 gallons
- Fuel consumption: 7 gph @ 2,000 rpm
- Props are 20″ x 24″, shaft is 1 3/4″
- Electronics: 2 marine radio telephones, Raymarine GPS, Raymarine Radar, Raymarine Depth Sounder, Ritchie Compass, PA system
- Sea Star Hydraulic steering
- Bow mounted 12 volt anchor winch with foot switch
- Fresh water capacity: individual plastic 20 litre tanks with pump
- Holding tank capacity: 75 gallons
- Safety gear: life jackets, 12 pax life raft, FA kit, flares, etc
- Bilge pumps: 3, auto 2000 gph
- Accommodations: large v-berth, table/settee, electric head
- Headroom is 6’6 in cabin and wheelhouse
- Additional: 600 lb davit with 12 v winch, floating dive ladder, twin remote spotlights, full deck lighting
- Very good overall condition
Located in Eastern Ontario, Canada
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
Walter Keel Coolers – 2 sizes available
- 3 are from 6-71 Detroit Diesels $3,500 USD each
- 2 are from 12-71 Detroit Diesels $5,000 USD each
- Location: New York State
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone519-583-1636
Return to Listings
B2386
2022 40′ x 18′ Sectional Barge w/ Ramp
- New Price: $199,000 CDN
- 2 sections 40′ x 9′ x 46″ high
- Ramp measures 14′
- Shell plate thickness 3/16″
- Barge capacity is 65,000 lbs
- Ramp is 14′ long
- Ramp capacity 14 ton
- Location: Georgian Bay area, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
B2385
2013 40′ x 14′ Steel Spud Barge w/Crane (Sides Fold for Trucking!)
- New Price: $65,000 USD
- The fold-up sides on this handy crane barge make it truckable
- Shell plate thickness 1/4″
- Sides are 2.5′ high
- Spuds are 6″ x 6″, 20′ long
- Powered by 2 Mercury 150hp outboards (2013)
- 1 hatch, 3 bulkheads
- Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
- Crane has 3/8″ cable and at 37′ will pick 4,000 lb
- Hydraulic steering
- Location: Western Michigan
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
B2382
2021 27′ x 8’6 Steel Dump Barge
- Price: $87,000 USD
- Dump Box measures 12′ x 7′, capacity about 5,000 lbs
- Honda gas powered hydraulic power pack
- 90 hp Mercury (2021) has 45 hours on it
- 8″ x 8″ x 8′ spuds
- Shell plate thickness 3/16″
- Location: British Columbia
- Check out the video below
-
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
B2383
2018 50′ x 12′ x 5′ Steel Barge w/ Ramp and Spuds
- SOLD!
- Shell plate thickness 1/4″
- Capacity approx 70,000 lbs
- 2 ramps 12′ x 2′
- 4 spuds
- 2 bulkheads – 3 compartments
- 3 hatches
- Location: Eastern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
