Tag Archives: HYDRAULIC

B2395

1958 43’9 x 24′ x 8′ 2-Section Steel Portable Dump Scow w/ 50 Cubic Yd Capacity, Hydraulic Scissor Dump

SOLD!
2 Sections 43’9 x 12′ x 8′ approx
Bottoms replaced during 1980’s, hopper replaced around 2010
Hopper capacity is 50 cubic yards
Motorized hydraulic scissor dump and close
GRT: 29.36
Draft is 4′ max loaded
Shell plate thickness is 1/4″
Shipping weight per section 15 tons approx
Hydraulic scissor dump system is powered by Honda GX160
Pump is Hydro-Tek 04cc/rev G204B02
Last survey 2011
Reported to be in Good/Excellent Condition
Location: Southern Ontario, Canada

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

FEATURED LISTINGS, PUSH BOATS, TUG BOATS, WORK BOATS

T2438

1955 53.3′ x 15.6′ 700hp Subchapter M Compliant Tugboat For Sale

Price: $260,000 USD
Draft is 6.4′
Air draft Mast Up: 24′, Mast down 21′
Height of eye Main Wheelhouse: 12′, Upper Wheelhouse: 18′
Built by Diamond Manufacturing Co. of Savannah, GA
GRT: 39 NRT:26
Powered by a Cummins KTA-19 rated at 700 hp, 1500 hours
Gear is Twin Disc MG170DC
Bollard Pull: 7 tons
Prop is 4′, 3 bladed, fixed pitch
Bow thruster
Fuel capacity: 1,500 gal
Hydraulic oil capacity: 55 gal
Slop oil capacity: 55 gal
2 – 40 ton manual Nabrico face winches
USCG certificate of Inspection (COI), 20 nm coastwise endorsement
Vessel completed its 5-year Coast Guard dry dock exam on 5/8/25
Subchapter M Compliant
Located in Michigan

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

FEATURED LISTINGS, PUSH BOATS, TUG BOATS, WORK BOATS

T2437

1940/1988 74′ x 18′ 500hp Steel Tugboat For Sale

Price: $150,000 USD
She’s got classic lines, a newer Cummins, and tons of room!
Built by Gulfport Shipbuilding of Port Arthur, Texas
GRT: 80, NRT:31
Shell plate thickness 7/16″
Registered length is 65′ x 18′, LOA is 74′ x 18′
Draft is 7.5′ light, 10′ heavy
Vessel weighs about 125 tons
Powered by a Cummins QSM 11 (WET), Keel cooled engine (2022), kicking out 500 hp, 80 hours
Gear is D-I Industrial, DMT 6550, 6.95:1
Prop is 74″ x 42″ RH Stainless on a 8.5″ shaft
She’ll cruise at 8-9 knots knots and has a top speed of 12 knots
Fuel capacity: 4,000 gal
Fuel consumption is 2 gph @ 6 knots, 6 gph @ 8 knots, 14gph@ 12 knots
Genset is Kubota Diesel, keel cooled, 27 kW
Two manual barge winches
Galley, Captain and 1 crew quarters – Crew quarters has room for 2 more bunks, plus forward bulkhead has room for 4
Head has shower, marine toilet and sink; Captain’s quarters also has sink
Fresh water capacity: 300 gal
Holding tank capacity: 2,500 gal
Electronics: 2 VHF radios, older Garmin GPS, 2 radars that are older units 6 mile and 24 mile, older Garmin direction finder and depth sounder, binnacle gyroscope
Steering is 24v electric over hydraulic rudder
Safety equipment includes fire extinguishers, halon and fireboy system not currently connected
Located in New York State

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

CREW BOATS, FEATURED LISTINGS, MARINE, TUG BOATS, WORK BOATS, YACHTS/PLEASURE CRAFT

W2450

1970 48′ x 16′ De Vries Lentsch Twin Screw Steel Work Boat Powered by Detroit Diesel

Price: $65,000 CDN
Built by the iconic W. De Vries Lentsch Jr. company of Amsterdam
Draft is 4’3″
GRT: 30.39, NRT: 22.8
Powered by 2 Detroit Diesel 6-71
Gears are Twin Disc MG509 3:1
2.5″ shafts with 4 blade props
In 2021 she received 4 new Cutlass bearings, shafts and props were dye tested – no cracking, props were balanced, and she got new rudder shafts, bearings and seals
Shell plate thickness 5mm
Fuel capacity total 6,580 litres (2540 litres port side, 2540 litres stbd, 1500 litres keel tank)
Fresh water capacity: 1,000 litres
Generators: 2 x Kohler, 28 EFOZD, 3 phase 120/208, 610 hours each
Electronics: 2 x VHF, GPS is Furuno GP37, Radars: Furuno enclosed 24″, Raymarine 48″ open color, Depth Sounder: 2 x Raymarine es 128 MFD, Compass: Ritchie Globemaster, Autopilot: Raymarine, Also Raymarine side scan, 1 kw depth sounder
Windlass is Maxwell HWC3500
Steering is Sea Star Hydraulic
Head is Dometic vacuum flush
Roof AC unit: Dometic with heat & Flagship Marine Chilled Water AC – 48,000 btu 3 phase – 3 x 16,000 btu chilled water fan coils with 2kw heat each
***Dive equipment not included***
Located in Southern Ontario

Check out the video below

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

BARGES, FEATURED LISTINGS, MARINE, MISCELLANEOUS, WORK BOATS

B2382

2021 27′ x 8’6 Steel Dump Barge For Sale

Price: $87,000 USD
Dump Box measures 12′ x 7′, capacity about 5,000 lbs
Honda gas powered hydraulic power pack
90 hp Mercury (2021) has 45 hours on it
8″ x 8″ x 8′ spuds
Shell plate thickness 3/16″
Location: British Columbia
Check out the video below

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

FEATURED LISTINGS, HOUSEBOATS, YACHTS/PLEASURE CRAFT

P2460

1972 52′ x 16′ Twin Screw Hike Built Steel Cruiser/Trawler

SOLD!

She’s a spacious boat with great lines and requires some work to be completed. Contact us for more details including the list of parts included.
GRT: 58.47, NRT: 39.76
Powered by twin 8 cyl Cummins Diesels, naturally aspirated V-300M, 300 hp @ 3000 rpm, SN 10225764 (Port), 10225257 (Stbd)
Approximately 4,000 engine hours
Gear is Twin Disc MG506, 2:1
Cruises at 10 knots
Hydraulic steering
Fuel capacity: 520 gal (2 x 260 gal tanks)
Generator is Onan 10kw, 120/240, 60 htz diesel
New battery boxes and mounts
Props are 25″ x 28″ 3 blade bronze, recently refurbished, 2″ shaft
Shell plate thickness: 1/4″ from main deck to keel, 3/16″ above main deck
3 bulkheads including collision bulkhead forward, all bulkheads are full height
Windlass with 200′ of steel chain
Electronics: Furuno 48 mile radar, Furuno GPS, Furuno GPS/sounder, Comnav auto pilot, AIS, (2) VHF radios
Wheelhouse is roughly 12′ x 8′ equipped with finger tip hydraulic steering ‘ships wheel’
Fresh water capacity: 180 gal, stainless steel tank
Holding tank: 180 gal, stainless steel tank
Headroom – Wheelhouse 6’6, Cabin 6’6, Engine room 5’10
Accommodations:
- Galley is equipped with microwave and fridge/freezer, 110 volt 4-burner stove and oven, stainless sink
- Saloon/galley/dining area is 12′ x 16′
- Boat is insulated
- Captain’s cabin has twin single beds + large closet
- Forward cabin has v-berths + closet
- Port side cabin has 2 bunk beds + closet
- Head has shower, sink and electric toilet
Swim platform is a generous size at 14′ x 6′
Located near Port Dover, Ontario
Click on the video below for a video walk through!