Tag Archives: steel boat

P2455

P2455

2023 45′ x 11.5′ Steel Pleasure Trawler

Price: $79,000 CDN

  • She’s got great lines and loads of room!
  • 4′ Draft
  • Powered by Caterpillar 3406B, 350hp, completely rebuilt
  • Cruises at 6 knots
  • Fuel capacity 2 x 60 gallons
  • Fuel consumption 2 gph
  • Prop is 24″ LH, 3 blade brass
  • Hydraulic bow thruster
  • Vessel weight 15 ton
  • Shell plate thickness 10 gauge
  • Headroom: Wheelhouse 6.5′, Galley/Cabin 6.5′, 
  • Electronics: 2 VHF, GPS is Standard Horizon, Depth Sounder is Standard Horizon, Compass
  • Battery charger
  • 3000W inverter
  • 2 x marine battery, 2 x regular battery
  • 1 ton winch with crane
  • Wood stove
  • Holding tank: 60 gal stainless
  • Safety equipment as required for the boat
  • 20 kg anchor
  • 2 x 1100 gph bilge pumps
  • Deck wash pump
  • Head is Jabsco electric marine toilet
  • Kitchenette includes stove top, 7 cubic foot fridge
  • Main and front cabin are finished in pine with 2 single beds
  • Located near Montreal, Quebec
  • CHECK OUT THE VIDEO BELOW

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index

         

P2451

P2451

 

2002  39′ x 13′ Steel Pleasure Tug

***DEAL PENDING***

  • Don’t wait….Make this handsome boat your home away from home!!
  • Draft is 4.5′
  • Powered by Detroit Diesel 6-71
  • Gear is MG 509 2.48:1
  • Cruising speed 7 knots
  • Prop is 4 blade brass 
  • Bow thruster
  • Onan 7.5kw generator
  • Electronics: radio, GPS, radar, depth sounder, compass, autopilot
  • Accommodations: water heater and air conditioning, 2 staterooms – one with bunk beds, head
  • Fuel capacity: 2 tanks each 180 gal for 360 gallons in total
  • Standard safety equipment: flares, axes, 6 fire extinguishers
  • Bilge pumps: 2
  • Deck wash pump
  • Last survey 2019
  • Located in Quebec

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index

         

P2454

P2454

1983 30′ x 9′ Welded Steel Motor Boat Project Boat

Price: $9,500 CDN or Best Offer

  • This project boat has nice lines and loads of potential!
  • 3′ Draft
  • Built by Kettle Creek Boat Works, Port Stanley, Ontario, Hull #1
  • Registered tonnage: 4.5 tons
  • Engine is Perkins (1983) 4.108 51 hp diesel
  • Condition of propulsion system: not run in 8 years
  • Stainless fuel tank estimated 80 – 90 gal capacity
  • Shell plating is 3/16″ with 1/8″ on cabin sides and top
  • 2″ x 3/16″ flat bar ribs on 24″ centers
  • 1″ x 3/16″ flat bar longitudinal hull frames at 16″ centers
  • 12″ x 6″  I-beam keel with bolted on lead ballast
  • Structure has minimal pitting, hull is solid, very little surface rust
  • Custom stands included
  • Located in Amherstburg, Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index