T2406
64′ x 18′ 1100 hp Tug with Retractable Wheelhouse
New Price: $99,900 USD
- With great lines and loads of power, she’s ready to go, go, go!
- Modernized in the 1970’s with the addition of a retractable wheelhouse
- Built in 1903 by Johnston Brothers of Ferrysburg, Michigan
- Last survey 2012
- 6′ draft
- Double steel hull
- Powered by Detroit 16-V149, 1100 hp
- Twin Disc MG 540
- Generators: 2 – 1 Perkins, 1 Detroit
- Fuel capacity: 2000 gal
- Lube oil capacity: 200 gal
- Cruising speed 10 knots
- Prop: 4 blade 76″ x 54″ turning a 6″ shaft
- Good overall condition
- Electronics: GPS, radio, depth sounder, compass
- Accommodations, kitchen, no head
- Location: New York State (Lake Ontario)
- File Ref T2406
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
T2430
1935 42′ x 14′ Single Screw Steel Tug / Workboat
- Price: $18,000 USD
- Built for ice-breaking, this rugged little tug runs strong and she’ll get the job done!
- US flagged and documented as an industrial vessel
- Shell plate thickness 1/2″ – 3/4″ at ice belt sheathing
- Last survey 2020
- Draft: 6’6″
- Engine: Detroit 8-V71, 300 hp
- Gear: Allison 4.5:1
- Prop approx 56″
- Fuel capacity: 2 x 250 gallon
- Generator: Lister 3 kw, air cooled
- Electronics: 2 VHF radios, depth sounder, GPS Plotter, 24 nm Furuno radar
- Portable toilet
- Located in NY State
- Needs haul out for paint/zincs and shaft packing
- File Ref T2430
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
T2427
1966 41.9′ x 12.4′ Twin Screw Model Bow Tug
- SOLD! YOU JUST MISSED IT!
- Draft: Approx. 5′ 6″
- GRT: 22, NRT: 10
- Approximate displacement: 26,000 lbs.
- Shell plate thickness est 3/8″
- Used in fresh water only
- Engines: Detroit Diesel 6-71, keel cooled, 220 hp each
- Transmissions: Allison model MH20R
- Prop Shafts: 4” diameter stainless steel
- Propellers: 48″, 4 bladed
- Push knee fitted with two 8″ x 2″ x 5′ tall rubber fenders
- Additional fendering: 2 port side and 3 stbd side 33″ long split tire fenders mounted on bulwarks forward, 7 port side and 6 stbd side tire fenders and a split tire rubrail around the elliptical stern
- Two-tiered rub rail
- Winches- port and starboard Nabrico Wintech winches w/ 5/8″ diameter galvanized steel cable
- Generator – Yanmar Model YDG 5500 EV-E diesel powered, 5500 Watt portable generator
- Bunk room below offers ample storage space
- Last survey October 2022
- Not subchapter M compliant
- Location: New York State
- File Ref T2427
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index