Tag Archives: Steel tug for sale

T2433

 T2433

1965 34.8′ x 13.3′ Steel Push Tug Powered by Caterpillar 

  • Price: $25,000 USD
  • GRT: 19, NRT:13
  • Molded depth: 5.1′
  • Powered by Caterpillar D333 (1963)
  • Gear is CAT 3.39:1
  • Cable steering
  • Fuel Capacity: 400 gal
  • Located in New York State on Lake Erie

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2432

 T2432

1985 35′ x 10’3 Steel Push Tug Powered by Detroit Diesel 

  • Price: $75,000 USD
  • GRT: 16, NRT:13
  • Molded depth: 5’5
  • Powered by Detroit Diesel 8v71
  • Gear is Twin Disc 2.5:1
  • Fuel Capacity: 400 gal
  • Hydraulic steering
  • 2 marine radios
  • Electric bilge pump
  • Engine driven air compressor
  • Located in New York State on Lake Erie

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2430

 T2430

1935 42′ x 14′ Single Screw Steel Tug / Workboat 

  • New Price: $12,000 USD

  • Built for ice-breaking, this rugged little tug runs strong and she’ll get the job done!
  • US flagged and documented as an industrial vessel
  • Shell plate thickness 1/2″ – 3/4″ at ice belt sheathing
  • Last survey 2020
  • Draft: 6’6″
  • Engine: Detroit 8-V71, 300 hp
  • Gear: Allison 4.5:1
  • Prop approx 56″
  • Fuel capacity: 2 x 250 gallon
  • Generator: Lister 3 kw, air cooled
  • Electronics: 2 VHF radios, depth sounder, GPS Plotter, 24 nm Furuno radar
  • Portable toilet
  • Located in NY State
  • Needs haul out for paint/zincs and shaft packing
  • File Ref T2430

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2428

 T2428

1946 45′ x 14′ Twin Screw Ex-Army Tug 

  • ***DEAL PENDING***
  • Draft: Approx. 5′
  • Engines:  Detroit Diesel 6-71, keel cooled, 220 hp each
  • Engines run well, check out the video below
  • Transmissions:  Allison 4:1
  • Propellers:  36″, 4 bladed
  • Last drydocking: Summer 2022
  • Location: New York State

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2431

 T2431

1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug

  • Price: $225,000 USD
  • Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
  • Draft: 5′
  • Ex USN Portsmouth Lady Submarine Tender
  • Fresh USCG Subchapter M COI with Great Lakes Route
  • Powered by 6-71 Detroit, cleanest Detroit around!
  • Gear is  Twin Disc 4.5:1
  • Topside painted in 2022
  • Bottom painted in 2021
  • 4 new batteries in 2023
  • New winches
  • Safety: all safety gear for USCG new in 2022, fixed fire CO2 system, heat detection and high water alarms
  • Located in Thousand Islands, New York State
  • File Ref T2431

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2427

 T2427

1966 41.9′ x 12.4′ Twin Screw Model Bow Tug 

  • SOLD! YOU JUST MISSED IT!
  • Draft: Approx. 5′ 6″
  • GRT: 22, NRT: 10
  • Approximate displacement:  26,000 lbs.
  • Shell plate thickness est 3/8″
  • Used in fresh water only
  • Engines:  Detroit Diesel 6-71, keel cooled, 220 hp each
  • Transmissions:  Allison model MH20R
  • Prop Shafts: 4” diameter stainless steel
  • Propellers:  48″, 4 bladed
  • Push knee fitted with two 8″ x 2″ x 5′ tall rubber fenders
  • Additional fendering: 2 port side and 3 stbd side 33″ long split tire fenders mounted on bulwarks forward, 7 port side and 6 stbd side tire fenders and a split tire rubrail around the elliptical stern
  • Two-tiered rub rail
  • Winches- port and starboard Nabrico Wintech winches w/ 5/8″ diameter galvanized steel cable
  • Generator – Yanmar Model YDG 5500 EV-E diesel powered, 5500 Watt portable generator
  • Bunk room below offers ample storage space
  • Last survey October 2022
  • Not subchapter M compliant
  • Location: New York State
  • File Ref T2427

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2286

File No. T2286

2008 47′ x 14.6′ x 5′ Steel Model Bow Tug

Price:$400,000 CDN

Built in Port Lambton, Ontario

This tugboat is truckable

  •  Gross tonnage:18.14 tons
  • Net tonnage:13.61 tons
  • Shell plate thickness: 3/16″
  • Framing: Tubing
  • Bulkheads: 3/16″
  • Headroom: Wheelhouse  6.5′, Cabin  7′, Engine room  7′
  • Engine: Detroit Diesel 8V71T, 350 hp, 3000 hours
  • Transmission: Twin Disc MG 5114 3:1 ratio
  • Generator: 7.5kw Onan
  • Shaft size: 3″
  • Propeller: 38″ x32″, 4 blade, Nibral, RH
  • Cruising speed:8 knots
  • Navigation equipment: VHF radio, Radar, Depth Sounder, Compass
  • Steering: Hydraulic
  • Bow thruster:12″ hydraulic bow thruster
  • Winches: Two
  • Fuel capacity:800 gal
  • Holding tank capacity: 80 gal
  • Head: Yes
  • Safety equipment: Yes
  • Bilge pumps: Yes
  • Deck wash pump: Yes
  • Accommodations: Not complete

Located in Western Ontario, Canada

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636
Return to index