Tag Archives: cummins

P2460

P2460

1972 52′ x 16′ Twin Screw Hike Built Steel Cruiser/Trawler

***DEAL PENDING***

  • She’s a spacious boat with great lines and requires some work to be completed. Contact us for more details including the list of parts included.
  • GRT: 58.47, NRT: 39.76
  • Powered by twin 8 cyl Cummins Diesels, naturally aspirated V-300M, 300 hp @ 3000 rpm, SN 10225764 (Port), 10225257 (Stbd)
  • Approximately 4,000 engine hours
  • Gear is Twin Disc MG506, 2:1
  • Cruises at 10 knots
  • Hydraulic steering
  • Fuel capacity: 520 gal (2 x 260 gal tanks)
  • Generator is Onan 10kw, 120/240, 60 htz diesel
  • New battery boxes and mounts
  • Props are 25″ x 28″ 3 blade bronze, recently refurbished, 2″ shaft
  • Shell plate thickness: 1/4″ from main deck to keel, 3/16″ above main deck
  • 3 bulkheads including collision bulkhead forward, all bulkheads are full height
  • Windlass with 200′ of steel chain
  • Electronics: Furuno 48 mile radar, Furuno GPS, Furuno GPS/sounder, Comnav auto pilot, AIS,  (2) VHF radios
  • Wheelhouse is roughly 12′ x 8′ equipped with finger tip hydraulic steering ‘ships wheel’
  • Fresh water capacity: 180 gal, stainless steel tank
  • Holding tank: 180 gal, stainless steel tank
  • Headroom – Wheelhouse 6’6, Cabin 6’6, Engine room 5’10
  • Accommodations:
    • Galley is equipped with microwave and fridge/freezer, 110 volt 4-burner stove and oven, stainless sink
    • Saloon/galley/dining area is 12′ x 16′
    • Boat is insulated
    • Captain’s cabin has twin single beds + large closet
    • Forward cabin has  v-berths + closet
    • Port side cabin has 2 bunk beds + closet
    • Head has shower, sink and electric toilet
  • Swim platform is a generous size at 14′ x 6′ 
  • Located near Port Dover, Ontario
  • Click on the video below for a video walk through!

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index

         

W2446

1966 35′ x 10′ Russel Brothers Work Boat – Project Boat

  • Price: $15,000 CDN
  • This Russel Brothers Hull #1232 might just be the project for you! 
  • GRT: 7.22, NRT: 5.73
  • Vessel weighs about 37,000 lbs
  • Cummins Diesel, rebuilt in 2017
  • Prop is Superston 70, 34 x 33.5, RH, 4 blade
  • Cable steering
  • Original winch
  • Fuel capacity 500 litre
  • Bilge pumps
  • Located in Quebec

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

      

W2445

1952 37’6 x 10′ Russel Brothers Work Boat – Needs Work

  • Price: $22,000 CDN
  • This Russel Brothers Hull #999 might just be the project you’ve been looking for!
  • GRT: 7.64, NRT: 5.73
  • Vessel weighs about 37,000 lbs
  • Cummins Diesel, model NH 220M,  220 hp, 225 hours
  • Prop is Osborne, 39 x 20, RH, 3 blade
  • Cable steering
  • Original winch
  • Fuel tank is new and has 185 gal capacity
  • Located in Quebec

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

      

W2442

 

1984 44′ x 12′ Aluminum Crew/Work Boat 

  • Price: $37,000 CDN  
  • Powered by twin Cummins V504 MRH
  • Borg Warner gears
  • Fuel capacity 300 gal
  • 3/16″ shell plate thickness
  • 6’11 of headroom
  • Inside cabin measures 8’6 across x 13’3 from steering wheel to back wall of cabin
  • Last in the water 2 years ago
  • Owner will put in water and ensure she runs fine prior to sale
  • Located in Port Dover, Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

      

D2139

D2139

2023 10″ Horizontal Auger Dredge

  • Price: $185,000 CDN
  • New hydraulic pump
  • Completely rebuilt engine 5.9 Cummins
  • Completely rebuilt dredging pump 10″
  • Stainless steel pontoons
  • Located in Quebec, Canada

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information   sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636   

Return to Listings