P2460
Tag Archives: STEEL
P2460
P2460
1972 52′ x 16′ Twin Screw Hike Built Steel Cruiser/Trawler
New Price: $85,000 CDN Reasonable Offers Considered
- She’s a spacious boat with great lines and requires some work to be completed. Contact us for more details including the list of parts included.
- GRT: 58.47, NRT: 39.76
- Powered by twin 8 cyl Cummins Diesels, naturally aspirated V-300M, 300 hp @ 3000 rpm, SN 10225764 (Port), 10225257 (Stbd)
- Approximately 4,000 engine hours
- Gear is Twin Disc MG506, 2:1
- Cruises at 10 knots
- Hydraulic steering
- Fuel capacity: 520 gal (2 x 260 gal tanks)
- Generator is Onan 10kw, 120/240, 60 htz diesel
- New battery boxes and mounts
- Props are 25″ x 28″ 3 blade bronze, recently refurbished, 2″ shaft
- Shell plate thickness: 1/4″ from main deck to keel, 3/16″ above main deck
- 3 bulkheads including collision bulkhead forward, all bulkheads are full height
- Windlass with 200′ of steel chain
- Electronics: Furuno 48 mile radar, Furuno GPS, Furuno GPS/sounder, Comnav auto pilot, AIS, (2) VHF radios
- Wheelhouse is roughly 12′ x 8′ equipped with finger tip hydraulic steering ‘ships wheel’
- Fresh water capacity: 180 gal, stainless steel tank
- Holding tank: 180 gal, stainless steel tank
- Headroom – Wheelhouse 6’6, Cabin 6’6, Engine room 5’10
- Accommodations:
- Galley is equipped with microwave and fridge/freezer, 110 volt 4-burner stove and oven, stainless sink
- Saloon/galley/dining area is 12′ x 16′
- Boat is insulated
- Captain’s cabin has twin single beds + large closet
- Forward cabin has v-berths + closet
- Port side cabin has 2 bunk beds + closet
- Head has shower, sink and electric toilet
- Swim platform is a generous size at 14′ x 6′
- Located near Port Dover, Ontario
- Click on the video below for a video walk through!
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636
Return to index
W2417
W2417
2023 16’6 x 6′ Steel Workboat
- SOLD! YOU JUST MISSED IT!
- 12 gauge bottom, 14 gauge sides
- 20″ transom
- Epoxy primed and painted
- Makes the perfect little run-about!
- Located in Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
66′ x 20′ Steel 100 PAX Boat – JUST REDUCED!!!
105′ x 24′ Steel Dump Scow – Just Listed!!
B2390
B2390
1965 105′ x 24′ Steel Dump Scow
- Call For Pricing
- She could use some fresh paint, but she’s ready to get to work!
- 350 cubic yard capacity
- 9’ depth from inside
- 9 waterproof compartments
- Opens with hydraulic cylinder
- Location: Quebec
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2443
1976 103.9′ x 25′ Steel Utility Supply Vessel ***Needs Work***
- Price: $98,000 USD
- This boat needs some work with the following known issues:
- The starboard shaft has been rung and needs to be repaired
- The hull pate near the port keel cooler is thin and needs to be doubled or replaced
- Built in Houma, LA
- GRT: 98, NRT:66
- Draft: 6.7′
- Shell Plate Thickness: .3775″
- Powered by twin Detroit Diesel 16V-71, 635 horsepower
- Twin Disc gears 4:1
- Cruises at 12 knots
- 60″ Stainless steel 4-blade props on 5.5″ stainless shafts
- (2) 40kw gensets 3-71 Detroits
- Electronics: radio, plotter, radar, compass
- Electric hydraulic steering
- Fuel capacity: 18,000 gallons
- Fuel consumption: 30-35 gph per pair at 2,000 rpm
- Fire pump is 4-53 Detroit
- More photos to come
- Located in South Carolina
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
Video Walk Through of 52′ Twin Screw Cruiser/Trawler with Great Lines and Tons of Space!
P2444
P2444
2003 57′ x 18′ x 6.5′ Steel Custom Built Trawler/Liveaboard
- Gross tonnage: 53.08 tons
- Net tonnage: 39.81 tons
- Shell plate thickness: 1/4″
- Framing: 2″ x 3/8″
- Bulkheads: 4 – 3/16″ plate
- Headroom: Wheelhouse – 6’7″, Cabin – 6’5″, Engine room – 6′
- Twin Detroit Diesel Series 60 engines – 430 hp ea – approx 5000 hrs
- Transmissions: (2) Twin Disc 1.92:1 ratio
- Steering: Hydraulic
- Shaft size: 2 1/2″ Stainless Steel
- Propellers: 30″ x 28″
- Cruising speed: 9.6 knots @ 1500 rpm
- Northern Lights 8 kw 120/240 genset
- Leroy Somer 18 KW 120/240 genset
- Navigation Equipment:
- Uniden and Cobra VHF radios, Eagle Accunav 11 GPS
- JRC 1800 Radar-Plotter, Ritchie Compass
- JRC FF10 Depth Sounder
- Hummingbird 997 GPS Side imaging
- (2) Culst remote spot lights
- Fuel capacity: 700 gal
- Fuel consumption: 8 gal per hour @ 1500 rpm each engine
- Fresh water capacity: 300 gal
- Holding tank capacity: 100 gal
- Black water capacity: 100 gal
- Winch: 16000 lb hydraulic
- Accommodations:
- All the wood is solid cherry
- Galley & salon above deck
- Full size G.E. fridge
- 1100 watt G.E. microwave
- 4 burner Frigidaire stove
- 6000 watt energy inverter
- 2 bedrooms
- One bedroom has double bed on bottom and single bed on top
- Master bedroom has a queen size bed
- 2 full 3 piece baths
- Furnace: Weil-McLain Gold Oil
- Safety equipment: 5 fire extinguishers, 10 Orion flares
- Bilge pumps: 3 – 12volt 2250 gph
- Additional features:
- 6000lb hydraulic crane
- 2.5 cfm dive compressor
- Located in Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636
Return to index
B2388
B2388
Sectional Barges, Rake Ends, Spuds, Wells and Winches for Lease or Purchase
- Competitively Priced
- Compatible with Poseidon sectionals
- Call for availability and pricing for:
- 10′ x 40′ x 5′ Barge Sections
- 10′ x 20′ x 5′ Barge Sections
- 10′ x 10′ x 5′ Rake Ends
- 32′ – 42′ Spuds and Spud Wells
- Diesel Spud Winches
- These sectional barges are constructed from 50W grade steel, ensuring robust performance in a variety of marine environments
- Each barge has an unloaded draft of 12″ making them easy to maneuver and deploy in shallow waters
- Easily truckable
- Modular design allows for flexible configurations to meet your requirements
- Weight of 20′ Section: 15,000 lbs
- Weight of 40′ Section: 27,000 lbs
- Location: Eastern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index