Category Archives: WORK BOATS

PV2212

FileNo. PV2212

 2009 11.63m x 3.8m x 1.28  (molded depth) Aluminum Amphibious 48PAX  Passenger Vessel/Landing Craft/WorkBoat (LARC TYPE)

Length: 38′, beam 12.5′, molded depth 4.2′
Air draft: 15.5′
Shell plate thickness: 6mm
Licenced to carry 48 passengers or light cargo
This is a class IV passenger vessel operating in a large estuary.
Gross tonnage: 9tons
Net tonnage: 2.7tons
Built in Ireland- built to a high standard with marine grade aluminum
Engine: Perkins Model 1106D – air  cooled – 175 hp, year2008, 980 hours
Propeller: 27″, 4 blade, bronze
Steering: Hydraulic
Cruising speed: 5 knots
Maximum speed: 6knots
Electronics: 1ICOM VHF, 2 handheld VHF, Garmin Plotter/Sounder GPS
Simrad Radar, AIS Class B, Locator,   Navtex
Safety equipment: EPIRB, SART, 3 liferafts (30 personopen-reversible)
2 line throwers -propelled
Bilge pumps: 6 auto + 6 manual
Fuel capacity: 300 litres
Freshwater capacity: 40 gal
Holding tank capacity: 40 gal
Fuel consumption: 12 litres/hour
Head: Wheelchair friendly with drop down arm supports
Additional features: Entrance – stairs at stern, side entrance
Located in Ireland
Price on request

Additional Informationreceived from the owner:

“Amphibious boat for Charter / Sale /Offers. This is a “Larc”type vessel, which is more a sea based boat than a “Duck”. It is licensed to carry 48 passengers or light cargo. It was built in 2009 in Tyrrells, Arklow, Ireland. It wasdesigned by Naval Architect – Hugo Van Der Zwan and hydraulics by Marshall Engineering.

It is aclass iv Passenger ship operating in a large estuary and licence may beupgraded. It is 38 feet(11.6m) long by 12 feet(3.8m) beam approx. It has a shipstability book.

She has six sealed compartments underdeck.
It is not a typical “duck” that does a street tour and a short tripin a river. This is more a robust estuary/river/coastal boat that can go up ongravel/sand beach.
It is robustly built to a high specification in Marine Grade Aluminium. It isworking on hard mud, gravel, sand beach at the moment. The drive is hydraulic,with each wheel driven by hydraulic motor. It has a differential lock givinghigh traction. It can drive beside a truck to take a pallet to a location onwater or an island etc.
A crane can be added. Seats can be removed. Roof can be opened. It can betransported by road. There is a wheelchair friendly toilet onboard.
This vessel would be useful on the shore side, estuary of pipeline or windfarm etc. No need for a nearby pier.”

“There willnever again be a boat of this specification with1000 hours on clock and runevery week.

It would cost atleast €600,000 euro to build this boat at lower specification.”

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 



       

W2277

File No.W2277

1991 17.67m x 4.48m x 1,48m Wood Covered with Fiberglass 10 Ton Cargo/Passenger/WorkBoat

Built in Maldives
Certified for 15passengers and 10 ton cargo
Last survey: May14, 2013
Gross tonnage:9.2 tons
Volvo Penta TAMD41 – 175 hp – year 1991
Twin Disc transmission
Shaft size:2″
Propeller size:24″
Steering:Hydraulic
Cruising speed:9 knots
Fuel capacity:400 litres
Fresh watercapacity: 300 litres
Electronics: VHFRadio, GPS, Compass
Located in Maldives
Price: $141,750 USD

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us forfurther information   sms@scrutonmarine.com
Scruton Marine Inc.    Phone519-583-1636  

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 

C2047

FileNo. C2047

    

1973 35′ x 12′ x 3.2′ Aluminum Crew/Dive Boat w/COI for 14 persons

Built in Laurelville, LA in 1973
Gross tonnage: 11 tons
Net tonnage: 8 tons
Shell platingthickness: 1/4″
Molded depth: 4.7′
(2) Engines: John Deere – Model 6068-300, 300 hp each, year 2002, 728 hrs
(2) Transmission: Twin Disc 1.5:1 ratio
Shaft size: 2″
Cruising speed: 24 knots
Fuel capacity: 400 USG
Fuelconsumption: 16 GPH
Generator: Portable
Navigation equipment: Furuno Radio, North Star GPS, Furuno Radar
Furuno Depth Sounder, Loran C, Ritchie Compass
Steering: Hydraulic
Fresh water capacity: 200 USG
Holding tank capacity: 20 USG
Safety equipment: 20 person raft
Bilge pumps: 5
Head: Yes
Additional features: Davit crane, dive ladder, anchor capstan, refrigerator
2 sinks, 2 anchors, dual helms, troll gear
Located in State of Michigan
Price $138,000 USD

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 

 

 

WORK BOATS

Here are some of the work boats we currently have listed for sale.
Use your mouse to click on the file number to see more details and in most cases additional  photos.

Head on over to the Subscribe Page  if you would like updates on New or Updates on Listings in this section.
Subscribe Now

FILE #DIMENSIONS
(listed according to size)
DESCRIPTIONLocationPRICE
W2345
118' x 44' x 7'1994 Trash Skimmer
Built to ABS Maltese A1 Standards
Could easily be converted to oil skimmer
Twin Cummins KTA 28 - 750 hp turning
Schottel drives
(2) Cummins 200kw gensets
70kw standby generator
Deck has 2 skimming or moon pools
Hydraulic telescoping Appleton crane
Rated at 44,000 lbs at all radiuses
New York State$350,000 USD
New Price
W2403110' 110' Offshore Supply Vessel and multi year gov contract, selling the businessEast Coast USA$350,000 USD
T241098.7' x 22' x 9'1939 Steel Tug for Sale, Powered by EMD 12-567, 5 hours on rebuild, Accommodations for 4, this boat is ready to go!Ontario$250,000 USD
W238686'10" x 36' x 9'2"2011 Multicat Eurocarier 2611, 2 cranes, 3 winches, licensed for 12, bowthruster, 33tonne bollard pull, powered by 2 CAT C32 enginesCaribbean€ 4.9 million
NEW LISTING
W2313
<
73' x 17 x 10'1969 Aluminum Work Boat
Built by Halter Boats, New Orleans, LA
(2) Detroit Diesel 6 cyl 60 Series
- total 1050 hp, year 2008
- 800 hours since overhaul in 2011
(2) Twin Disc MG 514A 2.5:1 gears
Lima 75KW, 208V genset
Palfinger K 4100 deck crane
Accommodations for 2
See listing for available dive equipment
Ontario$150,000 USD
S2044
19.05m x 6m x 1.35m
1980 Steel EX CCGS Buoy Tender
GRT: 79.78 tons
NRT: 33.34 tons
Engines: (2) NT855-M2 - 189 KW each
Transmissions: (2) Twin Disc 4G5114SC
Generators: (2) CAT 3304 = 53KW
Hiab Sea Crane 200- lift cap. 9,100 kg
Manual crane arm boom - lift cap. 900 kg
Metalcraft 4.2m workboat - 50 hp outboard
Accommodations for 5
Galley, mess and lavatory facilities
Ontario$499,000 CDN
W2277
17.67m x 4.48m x 1.48m
1991 Wood Covered with Fiberglass
10 Ton Cargo/Passenger/Work Boat
Built in Maldives
Gross tonnage: 9.2 tons
Certified for 15 passengers
Certified for 10 ton cargo
Volvo Penta TAMD41 - 175 hp
Twin Disc transmission
Cruising speed: 9 knots
Maldives$141,750 USD
W235150' x 16' x 4' draftNew twin screw hull
3/16″ thick hull , heavily framed
Would be good for a workboat
Or for a pleasure tug
Ontario$19,500 CDN
New Listing
W2137
50’ x 15.5’ x 5.5’1961 Steel Tanker (Refueling vessel)
Double bottom
Canada Coast Guard certified tanker
Capacity: 23,000 litres in 4 compartments
Volvo MD100B – 155 hp
Capital transmission
Always in fresh water, Last survey 2019
Ontario$84,000 CDN
new price!
W2281
50' x 14.6' x 7.6'

1971 Steel Hull/Aluminum Cabin Pilot Boat
Built by Gladding Hearn Shipbuilding
Gross tonnage: 41 tons
Net tonnage: 28 ton
Detroit Diesel 12V-71 engine - 480/504 hp
Twin Disc MG514 3:1 transmission
Cruising speed: 10 knots
Maine$63,999 USD
W239250' x 14' x 3'1987 Steel Work Boat/Cargo Tug for sale, cargo capacity 38,700 lbs, powered by 2 6-71 Detroits @ 220hp each, needs steel work, haulout and paintSouth Carolina$25,000 USD
New Price!
C2065
45' X 14.5'1982 Gladding Hearn Built Crew Boat
Steel hull/ aluminum cabin
Twin QSM11 535hp Diesel Engines (yr 2000)
Cruising speed: 20 to 26 knots
12KW generator
Can carry up to 15 persons
Boat has always been in fresh water
New York State$155,000 USD
44' x 10.5'2018 Aluminum Crew/Work Boat, 18" draft, Powered by 2 Yamaha F250 220 hours, COI for 24 passengers, truckable, etc.LouisianaSOLD!
Another can be built
T241442' x 11'9Russel Brothers Work Tug for sale, 12.34 GRT, 12-71 Detroit Diesel w/100 hrs on rebuild, MG512 3:1 gearOntario$180,000 CDN
New Listing!
41' x 13'6"1978 UTB
Twin Cummins 300 hp
Fire pump
350 gallon fuel capacity
New York StateSOLD!
C206840' x 12' x 3'6"1985 Willard Fiberglass Crew/Work Boat, cradled included, Powered by 6-71 260 hours on engine, needs pressure washing - otherwise good to go!British Columbia$14,900 CDN
PRICE JUST REDUCED!
FV215339' x 12'71948 Steel Paasch Trapnetter, 120hp Ford Lehman, electronics, GRT: 14Ohio$30,000 USD
New Price
PV2212
11.63m 3.8m x
4.2m (molded depth)
2009 Amphibious Landing Craft LARC Type
Built in Ireland of marine grade aluminum
Licenced to carry 48 passengers or cargo
It has 6 sealed compartments below deck
Engine: Perkins Model1106D 175 hp
Cruising speed: 5 knots
Can drive up on a beach
Can be transported by road
IrelandPrice on request
C2047
35' x 12' x 3.2'1973 Twin Screw Crew/Dive Boat
for 14 (12 divers plus 2 crew)
Aluminum - built in Lourenville, LA
Gross tonnage: 11 tons
Net tonnage:8
Last survey: July 2010
John Deere 6068- 300 hp - year 2002
Davit crane, dive ladder, dual helms
Michigan$138,000 USD
PB201034'10 x 11'3 x 3'2000 Steel Twin Screw Work/Crew/Patrol Boat for Sale, 14.99 GRT, 2 Volvo Penta TAMDL63L 314hp turbo dieselsOntario
(Southern Ontario)
DEAL PENDING
30' x 11.5'
(2) 1991 Munson Dive/ Work Boats
All aluminum construction
Twin 7.4 liter Crusaders with straight drives
Diver Door
Wide walk arounds
Comfortable cabin
Enclosed head
Flood lights, tow post
New York StateSOLD!
W2168
30’ x 9’ x 3.5’1954 Steel Open Work Boat
Detroit Diesel 4-53/ Borg Warner 3:1 gear
22” propeller
Wisconsin$12,600 CDN
29'11 x 10'72000 Aluminum Z-Drive Tug, Bow gate door, John Deere 150hp, 1800 hrs, rugged push knees, 2 pullmaster winches, boat needs finishing offNewfoundlandSOLD!
W240728' X 11.6"1989 Twin Screw Monark Work/Crew Boat, Powered by 2 250hp Mercruiser dieselsNew York State$35,000 USD
28' x 10' x 3'1988 Henley Built, Aluminum Crew/Work Boat, Twin Volvo Penta inboard-outboard, 145hp, last survey 2017, COMES WITH TRAILER!OntarioSOLD!
W235228' x 8'1985 Converted Lifeboat
Fiberglass hull, aluminum superstructure
4 cyl Westerbeke
Trailer included
Ontario$25,000 CDN
W240627' x 7'1999 Hike Built Aluminum Patrol Boat w/ Trailer, draft less than 2', 2 150hp Evinrude outboards (2004), twin 50 gal gas tanks, 1999 PJ boat trailer tandem axleNew York StateDEAL PENDING

W237026' x 10.5'1980 Aluminum Work Boat, Volvo Penta Twin D3-160A EVC-B (2005), 160 hp, 320 hrs, Sleeps 2Iqaluit Nunavut$25,000 CDN
W239526' x 9'42009/2020 Silvership Ambar, 2017 Suzuki 250hp outboards, NEW TUBES, ELECTRONICS AND PAINT IN 2020, Ready to go! Aluminum TrailerMississippi$120,000 USD
New Listing!
25' x 9'6"1989 25' x 9'6" Sea Ark FAST Response Work Boat DE-RIGGED
Full fendering all the way around
Tow post, side dive door, spotlight, VHF, radar
Fuel capacity 120 gallons
3' draft with motors down
New York StateSOLD!
W238324'6" x 9'New 24'6" x 9' Steel Work Boat with Wheelhouse, 15' of deck ahead of wheelhouse, 4" pipe side cap, (2) 4" spud pockets aft, built to orderOntario
Port Dover
$25,750 CDN
W240524' x 8.5'2006 McKee Craft, 250 hp Evinrude E-tec, 28" draftNew York State$38,000 USD
New Listing!
24' x 8'Steel Work Boat with tandem trailer and 175hp YamahaNear Port Dover, OntarioSOLD!
Ask us about similar boats!!
B233823'6 x 8' x 30"New Steel Work Barge, double rake, split pipe bump rail, removable push knees, 3' x 8' x 6'8 wheelhouse hinges forward for lower trucking, 6 cleats, Built to orderOntario
(Port Dover)
$28,750 CDN
23' x 9'62020 Pontoon Work Barge w/ Crane & Flatbed Tandem Trailer, steel pontoons, aluminum deck, GM V6 inboard/outboardOntario
(near Port Dover)
SOLD!
B2356 23' x 8'6 x 34" New Steel Work Boat for Sale, push knees, console, spud pockets. Capacity 16,000 lbs. Built to orderOntario
(Port Dover area)
$30,000 CDN
W239722' x 102"New Build Dual Console Aluminum Work/Ski/Fishing Boat, cargo cap 2400 lbs, fuel cap 40 gal, other sizes availableOntarioCALL FOR PRICING
NEW LISTING!
W238721' x 8'1985 Aluminum Work Boat, powered by Volvo Penta AD41P-A, 200hp
Comes with Trailer
QuebecNOT PRESENTLY AVAILBLE - CHECK BACK LATER
W238821' x 8'2020 Aluminum Dory/Work Boat - New Build, 3/16 floor with a 3″ sub floor and 3/16 checker plate, 3/16 walls with a 10″ wide wash board
PEI$13,500 CDN
New Listing
21' x 7'62019 Aluminum boat w/Tandem Axle trailer, new, 100 liter fuel capacity, NO POWEROntario
(Northern)
SOLD!
W238121' x 7'6"1998 Aluminum Work Boat w/ Trailer, Inboard/Outboard 4 cyl Mercruiser engine 130hp, Mercruiser outdrivePort Dover, Ontario$9,500 CDN
W236720' x 8'New Steel Push Boat, c/w console, push knees, motor bracket, 1 coat primer, light draft 8", Built to orderOntario$15,000 CDN
W241020' x 8'2016 Steel Workboat w/ 40hp Honda, 3/16" construction, trailer availableOntario
(Eastern Ontario)
$20,000 CDN
New Listing!
W240920' x 7'2015 Rugged Steel Work Boats for Sale, 2 availableNew York State$22,000 USD
(w/90hp Honda)
$18,000 USD
(w/50hp Honda)
W238519'6 x 6'6Aluminum Work Boat, 3/16" sides, 1/8" sidesNear Port Dover, Ontario$10,000 CDN
New Listing!
19' x 9'8Fiberglass Sea Truck, 6' bow gate door with manual winch, 4 cyl Merc, comes w/trombone trailerOntario
(Near Belleville)
SOLD!
W239419' x 8'New Build Aluminum Fishing/Work Tiller Boat, 3/16" hull, self bailing, waterproof storage areas, capacity 5Western Canada$25,000 CDN
Base model
Custom options available
W236619' x 7'6" x 32"New Steel Work Boat,
10 gauge steel, built to order
Port Dover, Ontario$9,750 CDN
19' x 7'2019 Aluminum boat w/Tandem Axle trailer, new, 100 liter fuel capacity, NO POWEROntario
(Northern)
SOLD!
W2207
18' 4"x 94"Aluminum Tiller Boats
Custom built
Weight 946 lbs
30" sides
Cargo capacity listed 1400 lbs
Have wide gunnels and are self bailing
Checker-plate water-tight decks
Seating can be customized
OntarioPRESENTLY UNAVAILABLE - CHECK BACK LATER
W239618' x 94"New Dual Console Work/Ski/Fishing Boat, Cargo cap 1400lbs, fuel cap 30 gal, 30" sidesOntarioCALL FOR PRICING
NEW LISTING!
W235017' x 6'6" x 2'2000 Workboat - NEEDS MECHANICAL - with trailer
120 hp MerCruiser inboard outboard
Hull in good shape
Went like a scared cat!
Ontario$3,000 CDN
W2391W239117' x 5'6 x 32"2020 Steel Work Boat, 12 ga hull, 10 ga transom, 2" x 3" rub rail, 2 1/2" pipe perimeter cap, suitable for 70hp outboardOntario
(Port Dover)
$8,000 CDN
16' x 5'Steel Workboat
No motor
Ontario
(near Port Dover)
SOLD!
W239315' x 68"New Build Aluminum Fishing/
Work Tiller Boat, 3/16" hull, 20" transom, capacity 2-4 people, options available
Western Canada$6,500 CDN
Base model
Custom options available!
W2097
4’ x 6’Fully enclosed aluminum pilothouse
Basic structure only
Ontario$7,250 CDN
SP223711'6" long x 80" w x 80" hSteel wheelhouse
11'6" long x 80" w x 80" h
Ontario$7500 CDN or best offer

Please contact us for further information  sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636  

Return to index