Tag Archives: NABRICO

WH2119

WH2119

(2) Nabrico 40 Ton Makeup Winches

  • Price: $3,500 USD for the pair
  • Left and Right hand units
  • Dogging tonnage is 40 tons
  • Condition: solid steel units, turn freely
  • Located in New York State
     

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2429

 T2429

1963 44′ x 15′  Single Screw 400 HP, Subchapter M Compliant Tug 

  • ***DEAL PENDING***
  • This rugged tug is a workhorse, presently working and ready to get the job done for you!
  • Draft: 5′
  • GRT: 18, Net: 12
  • Rated bollard pull: 4 tons
  • Air draft: Mast up 15′, Mast down 10′
  • Engine: Caterpillar D343, 400 hp
  • Propeller:  bronze, fixed pitch
  • Generator: Lister 15kW AC
  • Fuel capacity: 1,000 gal
  • Berths for 2
  • Towing Equipment: (2) Nabrico 5 ton manual face winches
  • Electronics: AIS, Autopilot, Open Array radar, new radios, new chart plotter and depth sounder/sonar
  • USCG Certificate of Inspection; Subchapter M compliant; Lakes, Bays and Sounds – no more than 3 NM from shore
  • Last drydocking: 2022
  • Last survey: 2022
  • Location: Massachusetts
  • File Ref T2429

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

T2427

 T2427

1966 41.9′ x 12.4′ Twin Screw Model Bow Tug 

  • SOLD! YOU JUST MISSED IT!
  • Draft: Approx. 5′ 6″
  • GRT: 22, NRT: 10
  • Approximate displacement:  26,000 lbs.
  • Shell plate thickness est 3/8″
  • Used in fresh water only
  • Engines:  Detroit Diesel 6-71, keel cooled, 220 hp each
  • Transmissions:  Allison model MH20R
  • Prop Shafts: 4” diameter stainless steel
  • Propellers:  48″, 4 bladed
  • Push knee fitted with two 8″ x 2″ x 5′ tall rubber fenders
  • Additional fendering: 2 port side and 3 stbd side 33″ long split tire fenders mounted on bulwarks forward, 7 port side and 6 stbd side tire fenders and a split tire rubrail around the elliptical stern
  • Two-tiered rub rail
  • Winches- port and starboard Nabrico Wintech winches w/ 5/8″ diameter galvanized steel cable
  • Generator – Yanmar Model YDG 5500 EV-E diesel powered, 5500 Watt portable generator
  • Bunk room below offers ample storage space
  • Last survey October 2022
  • Not subchapter M compliant
  • Location: New York State
  • File Ref T2427

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index