Category Archives: WORK BOATS

WORK BOATS

W2168

File No.W2168

30x 9 x 3.5 Steel Open Work Boat

Built in 1954
Registered in USA
Powered by Detroit Diesel 4-53 diesel engine rad cooled
C/wBorg Warner Velvet Drive 2.9:1 transmission
Equipped with 22 propeller
The steering console is fitted with dual lever engine controls
Manualsteering with single blade gudgeon/pintle mounted rudder
Fittedwith a double tow bit aft and a single bit forward

Located in Wisconsin

Price$12,600 US

This vessel is in general satisfactory condition with shell plating with few scattered local indentations to maximum of ¾ with some minor to moderate external pitting primarily along the port bilge strake.

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

WORK BOATS, YACHTS/PLEASURE CRAFT

W2045

File No. W2045

New 18 x 76 Airboat

Built in Canada
Engine 355 cubic inch Chevrolet motor 385 hp
Drive Unit Air Boat Drive CH 2
Header Stainless Steel
Gear Reduction Franklin 2:1
Propeller Whirlwind AB 300 or 400 Composite
Rudder Dual fiberglass
Cage Steel construction with baked enamel finish
Navigation lighting Directional: 4 x 200,000 Candle Power Lighting System
Nav: Nightime running lights (Red, Green & White)
Interior Heating System 50,000 BTU, dual stage fan defrost and cockpit
Fuel Tank 28 gallons/112 litres
Hull Fiberglass, 6 stringers, recessed polymer panels sides and bottom
Seating 2 front bucket seats and 4 person rear bench
Canopy Completely enclosed, winter grade canvas with clear vinyl sides
Custom Built Trailer Torsion Bar, 3,500 lb axles, 2 ball
Optional Equipment Block Heater, Intercom System, Remote Spot Light
Special design interior for Search and Rescue operations
Ice Brake, Compass, GPS System, VHF Radido

Located in Ontario. Canada

Price on Request

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

PASSENGER VESSELS, PATROL BOATS, SHIPS, WORK BOATS

S2045

File No.S2045

1973 116′ x 26′ x 7′ Steel Expedition/ Dive/ Patrol /Guard/ Cruise Ship

DATA

Type: Survey / Security vessel
Flag: Vanuatu
Classification: Germanisher Lloyd -DNV

SPECIFICATIONS

Year built 1973: (Extensivelyrefurbished 1995)
LOA: 35.36m (116ft)
Breadth: 7.92m (26ft)
Draught: 2.13m (7ft)
Number of decks: 4
Construction: Steel
Net tonnage: 86 NRT
Gross tonnage: 286 GRT

ENGINEERING
Engines: 2 no. Kelvin T8 engines, each providing 240 HP @ 1,000 via Kelvin 2:1 hydraulic reverse reduction gearbox

Generators: 1 x Cummins 6 CTA :Producing 136 K.W., 415 volts, 3 Phase, 50Hz
3 x Caterpillar D330 : Producing 40 K.W., 415 volts, 3 Phase, 50 Hz.,each
1 x Lister AR2A (Emergency ) Producing 12 K.W., 415 Volts, 3 Phase, 50Hz
Fuel andCapacity: MGO 0.1% Sulphur
2 x 8,500 ltr tanks (forward)
2 x 4,500 ltr tanks (aft)
Total: 26,000 ltr
Endurance(estimated)
FullSpeed: 10.25 knots, on about 1.40 Tonnes Gas Oil per 24 Hours
Service Speed: 9.00 knots, on about 1.10 Tonnes Gas Oil per 24 hours
Anchor: 250 ltrs per day

WATER
FreshWater capacity: 2 x 14,000 ltr(forward)
Total: 28,000 ltr
Freshwater maker: 3 ton/ hr max, dependent on sea conditions
Ballast water: 33.24 tonnes

ACCOMMODATION
Crew: 10
Passenger: 40
Bathrooms: En-suite plus additional
Accommodation: En-suite Cabins,Galley, Lounge area

ADDITIONAL EQUIPMENT

Built in 1973 by Carrington Slipways Pte., Tomaga,Australia as a patrol vessel
In 1988 she undertook scientific work aroud theFalkland Islands

In 1992 she operated as a support vessel in UKoffshore oil industry
She has been utilized in Cape Verde Islands with 20divers aboard
She completed 5 year classification survey byGermanischer Lloyd in Aug 2012
Next renewal in August 2017
Dry cargo capacity: 5,500 cu. ft
Large aft deck – 55 sq. metres
(2) hydraulic cranes – 3 tons
2 large RIBs included
Also fitted to carry armaments & explosives
Flag: Venuatu
New Price: £450,000

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

NEW CONSTRUCTION, WORK BOATS

W2097

File No. W2097

New 4 x 6 Aluminum Pilothouse

Fully enclosed
Glass and windshield wiper are just a couple of features left to install
Built in Ontario
Price of basic aluminum pilothouse $7,250 CDN

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

LANDING CRAFT, PASSENGER VESSELS, WORK BOATS

PV2212

FileNo. PV2212

2009 11.63m x 3.8m x 1.28 (molded depth) Aluminum Amphibious 48PAX Passenger Vessel/Landing Craft/WorkBoat (LARC TYPE)

Length: 38′, beam 12.5′, molded depth 4.2′
Air draft: 15.5′
Shell plate thickness: 6mm
Licenced to carry 48 passengers or light cargo
This is a class IV passenger vessel operating in a large estuary.
Gross tonnage: 9tons
Net tonnage: 2.7tons
Built in Ireland- built to a high standard with marine grade aluminum
Engine: Perkins Model 1106D – air cooled – 175 hp, year2008, 980 hours
Propeller: 27″, 4 blade, bronze
Steering: Hydraulic
Cruising speed: 5 knots
Maximum speed: 6knots
Electronics: 1ICOM VHF, 2 handheld VHF, Garmin Plotter/Sounder GPS
Simrad Radar, AIS Class B, Locator, Navtex
Safety equipment: EPIRB, SART, 3 liferafts (30 personopen-reversible)
2 line throwers -propelled
Bilge pumps: 6 auto + 6 manual
Fuel capacity: 300 litres
Freshwater capacity: 40 gal
Holding tank capacity: 40 gal
Fuel consumption: 12 litres/hour
Head: Wheelchair friendly with drop down arm supports
Additional features: Entrance – stairs at stern, side entrance
Located in Ireland
Price on request

Additional Informationreceived from the owner:

“Amphibious boat for Charter / Sale /Offers. This is a “Larc”type vessel, which is more a sea based boat than a “Duck”. It is licensed to carry 48 passengers or light cargo. It was built in 2009 in Tyrrells, Arklow, Ireland. It wasdesigned by Naval Architect Hugo Van Der Zwan and hydraulics by Marshall Engineering.

It is aclass iv Passenger ship operating in a large estuary and licence may beupgraded. It is 38 feet(11.6m) long by 12 feet(3.8m) beam approx. It has a shipstability book.

She has six sealed compartments underdeck.
It is not a typical “duck” that does a street tour and a short tripin a river. This is more a robust estuary/river/coastal boat that can go up ongravel/sand beach.
It is robustly built to a high specification in Marine Grade Aluminium. It isworking on hard mud, gravel, sand beach at the moment. The drive is hydraulic,with each wheel driven by hydraulic motor. It has a differential lock givinghigh traction. It can drive beside a truck to take a pallet to a location onwater or an island etc.
A crane can be added. Seats can be removed. Roof can be opened. It can betransported by road. There is a wheelchair friendly toilet onboard.
This vessel would be useful on the shore side, estuary of pipeline or windfarm etc. No need for a nearby pier.”

“There willnever again be a boat of this specification with1000 hours on clock and runevery week.

It would cost atleast 600,000 euro to build this boat at lower specification.”

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

PASSENGER VESSELS, WORK BOATS

W2277

File No.W2277

1991 17.67m x 4.48m x 1,48m Wood Covered with Fiberglass 10 Ton Cargo/Passenger/WorkBoat

Built in Maldives
Certified for 15passengers and 10 ton cargo
Last survey: May14, 2013
Gross tonnage:9.2 tons
Volvo Penta TAMD41 – 175 hp – year 1991
Twin Disc transmission
Shaft size:2″
Propeller size:24″
Steering:Hydraulic
Cruising speed:9 knots
Fuel capacity:400 litres
Fresh watercapacity: 300 litres
Electronics: VHFRadio, GPS, Compass
Located in Maldives
Price: $141,750 USD

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us forfurther information sms@scrutonmarine.com
Scruton Marine Inc. Phone519-583-1636

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

CREW BOATS, WORK BOATS

C2047

FileNo. C2047

1973 35′ x 12′ x 3.2′ Aluminum Crew/Dive Boat w/COI for 14 persons

Built in Laurelville, LA in 1973
Gross tonnage: 11 tons
Net tonnage: 8 tons
Shell platingthickness: 1/4″
Molded depth: 4.7′
(2) Engines: John Deere – Model 6068-300, 300 hp each, year 2002, 728 hrs
(2) Transmission: Twin Disc 1.5:1 ratio
Shaft size: 2″
Cruising speed: 24 knots
Fuel capacity: 400 USG
Fuelconsumption: 16 GPH
Generator: Portable
Navigation equipment: Furuno Radio, North Star GPS, Furuno Radar
Furuno Depth Sounder, Loran C, Ritchie Compass
Steering: Hydraulic
Fresh water capacity: 200 USG
Holding tank capacity: 20 USG
Safety equipment: 20 person raft
Bilge pumps: 5
Head: Yes
Additional features: Davit crane, dive ladder, anchor capstan, refrigerator
2 sinks, 2 anchors, dual helms, troll gear
Located in State of Michigan
Price $138,000 USD

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

WORK BOATS

Here are some of the work boats we currently have listed for sale.
Use your mouse to click on the file number to see more details and in most cases additional photos.

Head on over to the Subscribe Page if you would like updates on New or Updates on Listings in this section.
Subscribe Now

FILE #	DIMENSIONS (listed according to size)	DESCRIPTION	Location	PRICE
W2345	118' x 44' x 7'	1994 Trash Skimmer Built to ABS Maltese A1 Standards Could easily be converted to oil skimmer Twin Cummins KTA 28 - 750 hp turning Schottel drives (2) Cummins 200kw gensets 70kw standby generator Deck has 2 skimming or moon pools Hydraulic telescoping Appleton crane Rated at 44,000 lbs at all radiuses	New York State	$350,000 USD New Price
W2403	110'	110' Offshore Supply Vessel and multi year gov contract, selling the business	East Coast USA	$350,000 USD
T2410	98.7' x 22' x 9'	1939 Steel Tug for Sale, Powered by EMD 12-567, 5 hours on rebuild, Accommodations for 4, this boat is ready to go!	Ontario	$250,000 USD
W2386	86'10" x 36' x 9'2"	2011 Multicat Eurocarier 2611, 2 cranes, 3 winches, licensed for 12, bowthruster, 33tonne bollard pull, powered by 2 CAT C32 engines	Caribbean	€ 4.9 million NEW LISTING
W2313 <	73' x 17 x 10'	1969 Aluminum Work Boat Built by Halter Boats, New Orleans, LA (2) Detroit Diesel 6 cyl 60 Series - total 1050 hp, year 2008 - 800 hours since overhaul in 2011 (2) Twin Disc MG 514A 2.5:1 gears Lima 75KW, 208V genset Palfinger K 4100 deck crane Accommodations for 2 See listing for available dive equipment	Ontario	$150,000 USD
S2044	19.05m x 6m x 1.35m	1980 Steel EX CCGS Buoy Tender GRT: 79.78 tons NRT: 33.34 tons Engines: (2) NT855-M2 - 189 KW each Transmissions: (2) Twin Disc 4G5114SC Generators: (2) CAT 3304 = 53KW Hiab Sea Crane 200- lift cap. 9,100 kg Manual crane arm boom - lift cap. 900 kg Metalcraft 4.2m workboat - 50 hp outboard Accommodations for 5 Galley, mess and lavatory facilities	Ontario	$499,000 CDN
W2277	17.67m x 4.48m x 1.48m	1991 Wood Covered with Fiberglass 10 Ton Cargo/Passenger/Work Boat Built in Maldives Gross tonnage: 9.2 tons Certified for 15 passengers Certified for 10 ton cargo Volvo Penta TAMD41 - 175 hp Twin Disc transmission Cruising speed: 9 knots	Maldives	$141,750 USD
B2353	50'10" x 19'10"	2014/2017 Damen Multi Cat, Powered by 2 Scania i13 071M, 2 x 400hp@ 1800 rpm, 7.6 ton bollard pull, deck crane, anchor winch, towing hook	Quebec	$1,575,000 CDN
W2351	50' x 16' x 4' draft	New twin screw hull 3/16″ thick hull , heavily framed Would be good for a workboat Or for a pleasure tug	Ontario	$19,500 CDN New Listing
W2137	50’ x 15.5’ x 5.5’	1961 Steel Tanker (Refueling vessel) Double bottom Canada Coast Guard certified tanker Capacity: 23,000 litres in 4 compartments Volvo MD100B – 155 hp Capital transmission Always in fresh water, Last survey 2019	Ontario	$84,000 CDN new price!
W2281	50' x 14.6' x 7.6'	1971 Steel Hull/Aluminum Cabin Pilot Boat Built by Gladding Hearn Shipbuilding Gross tonnage: 41 tons Net tonnage: 28 ton Detroit Diesel 12V-71 engine - 480/504 hp Twin Disc MG514 3:1 transmission Cruising speed: 10 knots	Maine	$63,999 USD
W2392	50' x 14' x 3'	1987 Steel Work Boat/Cargo Tug for sale, cargo capacity 38,700 lbs, powered by 2 6-71 Detroits @ 220hp each, needs steel work, haulout and paint	South Carolina	$25,000 USD New Price!
C2065	45' X 14.5'	1982 Gladding Hearn Built Crew Boat Steel hull/ aluminum cabin Twin QSM11 535hp Diesel Engines (yr 2000) Cruising speed: 20 to 26 knots 12KW generator Can carry up to 15 persons Boat has always been in fresh water	New York State	$155,000 USD
	44' x 10.5'	2018 Aluminum Crew/Work Boat, 18" draft, Powered by 2 Yamaha F250 220 hours, COI for 24 passengers, truckable, etc.	Louisiana	SOLD! Another can be built
T2414	42' x 11'9	Russel Brothers Work Tug for sale, 12.34 GRT, 12-71 Detroit Diesel w/100 hrs on rebuild, MG512 3:1 gear	Ontario	$180,000 CDN New Listing!
	41' x 13'6"	1978 UTB Twin Cummins 300 hp Fire pump 350 gallon fuel capacity	New York State	SOLD!
C2068	40' x 12' x 3'6"	1985 Willard Fiberglass Crew/Work Boat, cradled included, Powered by 6-71 260 hours on engine, needs pressure washing - otherwise good to go!	British Columbia	$14,900 CDN PRICE JUST REDUCED!
FV2153	39' x 12'7	1948 Steel Trap Net Vessel, 120hp Ford Lehman, electronics, GRT: 14	Ohio	$30,000 USD New Price
PV2212	11.63m 3.8m x 4.2m (molded depth)	2009 Amphibious Landing Craft LARC Type Built in Ireland of marine grade aluminum Licenced to carry 48 passengers or cargo It has 6 sealed compartments below deck Engine: Perkins Model1106D 175 hp Cruising speed: 5 knots Can drive up on a beach Can be transported by road	Ireland	Price on request
C2047	35' x 12' x 3.2'	1973 Twin Screw Crew/Dive Boat for 14 (12 divers plus 2 crew) Aluminum - built in Lourenville, LA Gross tonnage: 11 tons Net tonnage:8 Last survey: July 2010 John Deere 6068- 300 hp - year 2002 Davit crane, dive ladder, dual helms	Michigan	$138,000 USD
	30' x 11.5'	(2) 1991 Munson Dive/ Work Boats All aluminum construction Twin 7.4 liter Crusaders with straight drives Diver Door Wide walk arounds Comfortable cabin Enclosed head Flood lights, tow post	New York State	SOLD!
W2168	30’ x 9’ x 3.5’	1954 Steel Open Work Boat Detroit Diesel 4-53/ Borg Warner 3:1 gear 22” propeller	Wisconsin	$12,600 CDN
	29'11 x 10'7	2000 Aluminum Z-Drive Tug, Bow gate door, John Deere 150hp, 1800 hrs, rugged push knees, 2 pullmaster winches, boat needs finishing off	Newfoundland	SOLD!
W2407	28' X 11.6"	1989 Twin Screw Monark Work/Crew Boat, Powered by 2 250hp Mercruiser diesels	New York State	$35,000 USD
	28' x 10' x 3'	1988 Henley Built, Aluminum Crew/Work Boat, Twin Volvo Penta inboard-outboard, 145hp, last survey 2017, COMES WITH TRAILER!	Ontario	SOLD!
W2352	28' x 8'	1985 Converted Lifeboat Fiberglass hull, aluminum superstructure 4 cyl Westerbeke Trailer included	Ontario	$25,000 CDN
W2406	27' x 7'	1999 Hike Built Aluminum Patrol Boat w/ Trailer, draft less than 2', 2 150hp Evinrude outboards (2004), twin 50 gal gas tanks, 1999 PJ boat trailer tandem axle	New York State	$35,000 USD
W2370	26' x 10.5'	1980 Aluminum Work Boat, Volvo Penta Twin D3-160A EVC-B (2005), 160 hp, 320 hrs, Sleeps 2	Iqaluit Nunavut	$25,000 CDN
W2395	26' x 9'4	2009/2020 Silvership Ambar, 2017 Suzuki 250hp outboards, NEW TUBES, ELECTRONICS AND PAINT IN 2020, Ready to go! Aluminum Trailer	Mississippi	$120,000 USD New Listing!
	25' x 9'6"	1989 25' x 9'6" Sea Ark FAST Response Work Boat DE-RIGGED Full fendering all the way around Tow post, side dive door, spotlight, VHF, radar Fuel capacity 120 gallons 3' draft with motors down	New York State	SOLD!
W2383	24'6" x 9'	New 24'6" x 9' Steel Work Boat with Wheelhouse, 15' of deck ahead of wheelhouse, 4" pipe side cap, (2) 4" spud pockets aft, built to order	Ontario Port Dover	$25,750 CDN
W2405	24' x 8.5'	2006 McKee Craft, 250 hp Evinrude E-tec, 28" draft	New York State	$38,000 USD New Listing!
	24' x 8'	Steel Work Boat with tandem trailer and 175hp Yamaha	Near Port Dover, Ontario	SOLD! Ask us about similar boats!!
B2338	23'6 x 8' x 30"	New Steel Work Barge, double rake, split pipe bump rail, removable push knees, 3' x 8' x 6'8 wheelhouse hinges forward for lower trucking, 6 cleats, Built to order	Ontario (Port Dover)	$28,750 CDN
	23' x 9'6	2020 Pontoon Work Barge w/ Crane & Flatbed Tandem Trailer, steel pontoons, aluminum deck, GM V6 inboard/outboard	Ontario (near Port Dover)	SOLD!
B2356	23' x 8'6 x 34"	New Steel Work Boat for Sale, push knees, console, spud pockets. Capacity 16,000 lbs. Built to order	Ontario (Port Dover area)	$30,000 CDN
W2397	22' x 102"	New Build Dual Console Aluminum Work/Ski/Fishing Boat, cargo cap 2400 lbs, fuel cap 40 gal, other sizes available	Ontario	CALL FOR PRICING NEW LISTING!
W2387	21' x 8'	1985 Aluminum Work Boat, powered by Volvo Penta AD41P-A, 200hp Comes with Trailer	Quebec	NOT PRESENTLY AVAILBLE - CHECK BACK LATER
W2388	21' x 8'	2020 Aluminum Dory/Work Boat - New Build, 3/16 floor with a 3″ sub floor and 3/16 checker plate, 3/16 walls with a 10″ wide wash board	PEI	$13,500 CDN New Listing
W2408	21' x 7'6	2019 Aluminum boat w/Tandem Axle trailer, new, 100 liter fuel capacity, NO POWER	Ontario (Northern)	$28,000 CDN New Listing!
W2381	21' x 7'6"	1998 Aluminum Work Boat w/ Trailer, Inboard/Outboard 4 cyl Mercruiser engine 130hp, Mercruiser outdrive	Port Dover, Ontario	$9,500 CDN
W2367	20' x 8'	New Steel Push Boat, c/w console, push knees, motor bracket, 1 coat primer, light draft 8", Built to order	Ontario	$15,000 CDN
W2385	19'6 x 6'6	Aluminum Work Boat, 3/16" sides, 1/8" sides	Near Port Dover, Ontario	$10,000 CDN New Listing!
	19' x 9'8	Fiberglass Sea Truck, 6' bow gate door with manual winch, 4 cyl Merc, comes w/trombone trailer	Ontario (Near Belleville)	SOLD!
W2394	19' x 8'	New Build Aluminum Fishing/Work Tiller Boat, 3/16" hull, self bailing, waterproof storage areas, capacity 5	Western Canada	$25,000 CDN Base model Custom options available
W2366	19' x 7'6" x 32"	New Steel Work Boat, 10 gauge steel, built to order	Port Dover, Ontario	$9,750 CDN
W2408	19' x 7'	2019 Aluminum boat w/Tandem Axle trailer, new, 100 liter fuel capacity, NO POWER	Ontario (Northern)	$25,000 CDN
W2207	18' 4"x 94"	Aluminum Tiller Boats Custom built Weight 946 lbs 30" sides Cargo capacity listed 1400 lbs Have wide gunnels and are self bailing Checker-plate water-tight decks Seating can be customized	Ontario	$14,225 CDN
W2396	18' x 94"	New Dual Console Work/Ski/Fishing Boat, Cargo cap 1400lbs, fuel cap 30 gal, 30" sides	Ontario	CALL FOR PRICING NEW LISTING!
W2350	17' x 6'6" x 2'	2000 Workboat - NEEDS MECHANICAL - with trailer 120 hp MerCruiser inboard outboard Hull in good shape Went like a scared cat!	Ontario	$3,000 CDN
W2391 W2391	17' x 5'6 x 32"	2020 Steel Work Boat, 12 ga hull, 10 ga transom, 2" x 3" rub rail, 2 1/2" pipe perimeter cap, suitable for 70hp outboard	Ontario (Port Dover)	$8,000 CDN
	16' x 5'	Steel Workboat No motor	Ontario (near Port Dover)	SOLD!
W2393	15' x 68"	New Build Aluminum Fishing/ Work Tiller Boat, 3/16" hull, 20" transom, capacity 2-4 people, options available	Western Canada	$6,500 CDN Base model Custom options available!
W2097	4’ x 6’	Fully enclosed aluminum pilothouse Basic structure only	Ontario	$7,250 CDN
SP2237	11'6" long x 80" w x 80" h	Steel wheelhouse 11'6" long x 80" w x 80" h	Ontario	$7500 CDN or best offer