Tag Archives: pusher

T2430

Price: $18,000 USD
Built for ice-breaking, this rugged little tug runs strong and she’ll get the job done!
US flagged and documented as an industrial vessel
Shell plate thickness 1/2″ – 3/4″ at ice belt sheathing
Last survey 2020
Draft: 6’6″
Engine: Detroit 8-V71, 300 hp
Gear: Allison 4.5:1
Prop approx 56″
Fuel capacity: 2 x 250 gallon
Generator: Lister 3 kw, air cooled
Electronics: 2 VHF radios, depth sounder, GPS Plotter, 24 nm Furuno radar
Portable toilet
Located in NY State
Needs haul out for paint/zincs and shaft packing
File Ref T2430

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

***DEAL PENDING***
This rugged tug is a workhorse, presently working and ready to get the job done for you!
Draft: 5′
GRT: 18, Net: 12
Rated bollard pull: 4 tons
Air draft: Mast up 15′, Mast down 10′
Engine: Caterpillar D343, 400 hp
Propeller: bronze, fixed pitch
Generator: Lister 15kW AC
Fuel capacity: 1,000 gal
Berths for 2
Towing Equipment: (2) Nabrico 5 ton manual face winches
Electronics: AIS, Autopilot, Open Array radar, new radios, new chart plotter and depth sounder/sonar
USCG Certificate of Inspection; Subchapter M compliant; Lakes, Bays and Sounds – no more than 3 NM from shore
Last drydocking: 2022
Last survey: 2022
Location: Massachusetts
File Ref T2429

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

SOLD! YOU JUST MISSED IT!
Draft: Approx. 5′ 6″
GRT: 22, NRT: 10
Approximate displacement: 26,000 lbs.
Shell plate thickness est 3/8″
Used in fresh water only
Engines: Detroit Diesel 6-71, keel cooled, 220 hp each
Transmissions: Allison model MH20R
Prop Shafts: 4” diameter stainless steel
Propellers: 48″, 4 bladed
Push knee fitted with two 8″ x 2″ x 5′ tall rubber fenders
Additional fendering: 2 port side and 3 stbd side 33″ long split tire fenders mounted on bulwarks forward, 7 port side and 6 stbd side tire fenders and a split tire rubrail around the elliptical stern
Two-tiered rub rail
Winches- port and starboard Nabrico Wintech winches w/ 5/8″ diameter galvanized steel cable
Generator – Yanmar Model YDG 5500 EV-E diesel powered, 5500 Watt portable generator
Bunk room below offers ample storage space
Last survey October 2022
Not subchapter M compliant
Location: New York State
File Ref T2427