Category Archives: WORK BOATS


FileNo. PV2212

 2009 11.63m x 3.8m x 1.28  (molded depth) Aluminum Amphibious 48PAX  Passenger Vessel/Landing Craft/WorkBoat (LARC TYPE)

Length: 38′, beam 12.5′, molded depth 4.2′
Air draft: 15.5′
Shell plate thickness: 6mm
Licenced to carry 48 passengers or light cargo
This is a class IV passenger vessel operating in a large estuary.
Gross tonnage: 9tons
Net tonnage: 2.7tons
Built in Ireland- built to a high standard with marine grade aluminum
Engine: Perkins Model 1106D – air  cooled – 175 hp, year2008, 980 hours
Propeller: 27″, 4 blade, bronze
Steering: Hydraulic
Cruising speed: 5 knots
Maximum speed: 6knots
Electronics: 1ICOM VHF, 2 handheld VHF, Garmin Plotter/Sounder GPS
Simrad Radar, AIS Class B, Locator,   Navtex
Safety equipment: EPIRB, SART, 3 liferafts (30 personopen-reversible)
2 line throwers -propelled
Bilge pumps: 6 auto + 6 manual
Fuel capacity: 300 litres
Freshwater capacity: 40 gal
Holding tank capacity: 40 gal
Fuel consumption: 12 litres/hour
Head: Wheelchair friendly with drop down arm supports
Additional features: Entrance – stairs at stern, side entrance
Located in Ireland
Price on request

Additional Informationreceived from the owner:

“Amphibious boat for Charter / Sale /Offers. This is a “Larc”type vessel, which is more a sea based boat than a “Duck”. It is licensed to carry 48 passengers or light cargo. It was built in 2009 in Tyrrells, Arklow, Ireland. It wasdesigned by Naval Architect – Hugo Van Der Zwan and hydraulics by Marshall Engineering.

It is aclass iv Passenger ship operating in a large estuary and licence may beupgraded. It is 38 feet(11.6m) long by 12 feet(3.8m) beam approx. It has a shipstability book.

She has six sealed compartments underdeck.
It is not a typical “duck” that does a street tour and a short tripin a river. This is more a robust estuary/river/coastal boat that can go up ongravel/sand beach.
It is robustly built to a high specification in Marine Grade Aluminium. It isworking on hard mud, gravel, sand beach at the moment. The drive is hydraulic,with each wheel driven by hydraulic motor. It has a differential lock givinghigh traction. It can drive beside a truck to take a pallet to a location onwater or an island etc.
A crane can be added. Seats can be removed. Roof can be opened. It can betransported by road. There is a wheelchair friendly toilet onboard.
This vessel would be useful on the shore side, estuary of pipeline or windfarm etc. No need for a nearby pier.”

“There willnever again be a boat of this specification with1000 hours on clock and runevery week.

It would cost atleast €600,000 euro to build this boat at lower specification.”

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index




File No.W2277

1991 17.67m x 4.48m x 1,48m Wood Covered with Fiberglass 10 Ton Cargo/Passenger/WorkBoat

Built in Maldives
Certified for 15passengers and 10 ton cargo
Last survey: May14, 2013
Gross tonnage:9.2 tons
Volvo Penta TAMD41 – 175 hp – year 1991
Twin Disc transmission
Shaft size:2″
Propeller size:24″
Cruising speed:9 knots
Fuel capacity:400 litres
Fresh watercapacity: 300 litres
Electronics: VHFRadio, GPS, Compass
Located in Maldives
Price: $141,750 USD

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us forfurther information
Scruton Marine Inc.    Phone519-583-1636  

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index



File No.C2065

1982 45′ x 14.5′  Gladding Hearn Built CrewBoat/Patrol Boat

Priced to sell at $155,000 USD
Steel hull/aluminum cabin
Twin QSM11 535hp ea Diesel Engines (yr 2000)
Cruising speed:20 to 26 knots
12KW generator
Can carry up to15 persons
Boat has always beenin fresh water
Located in NewYork State

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.   Phone 519-583-1636
Return to index


FileNo. C2047


1973 35′ x 12′ x 3.2′ Aluminum Crew/Dive Boat w/COI for 14 persons

USCG COI for 14 (12 divers plus 2 crew)
Built in Laurelville, LA in 1973
Gross tonnage: 11 tons
Net tonnage: 8tons
Last survey: July, 2010
Shell platingthickness: 1/4″
Molded depth: 4.7′
(2) Engines: John Deere – Model 6068-300, 300 hp each, year 2002, 728 hrs
(2) Transmission: Twin Disc 1.5:1 ratio
Shaft size: 2″
Cruising speed: 24 knots
Fuel capacity: 400 USG
Fuelconsumption: 16 GPH
Generator: Portable
Navigation equipment: Furuno Radio, North Star GPS, Furuno Radar
Furuno Depth Sounder, Loran C, Ritchie Compass
Steering: Hydraulic
Fresh water capacity: 200 USG
Holding tank capacity: 20 USG
Safety equipment: 20 person raft
Bilge pumps: 5
Head: Yes
Additional features: Davit crane, dive ladder, anchor capstan, refrigerator
2 sinks, 2 anchors, dual helms, troll gear
Located in State of Michigan
Price $138,000 USD

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index





File No. FV2134

1983 24′ x 8’4″ x 2′ deep Aluminum Open Commercial Fishing Boat

Built in NewYork State
24″ deepchine to gunnel
Centre console
Still has fishbox separations
70 hp 2 stroke Evinrude outboard (works well)
15 hp 4 stroke Honda outboard (just an emergency motor)
Also includes older tandem trailer
“This boath as lots of potential”
Located in Bruce Peninsula area
Price: $21,000 CDN

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index



FileNo. T2376

Tug and Barge Package


Tug #1 -Model Bow Tug
1964 52′ x 16.5′ x 6′ draft
GRT 39
8V71 Detroit Diesel
Twin disc 4.5:1 gear
Keel cooled
42 x 42 prop
2-71 genset
Fuel capacity 4000 gallons
Last drydock 2011
Radar, GPS, 2 VHF radio, hailer
Fire alarm system
3 bunks, full galley, head with shower
Life raft
New framing in lazarette bottom 2015

Barge #2 -Barge with Deckhouse
32′ x 62′ x 6′
late 1960’s
2 spudwells starboard side
2 spuds 40′ long
Located in New York State

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.  Phone 519-583-1636
Return to index


FileNo. W2230

 New Build 25′ x 10′ x 4′ Steel Work Boat/Push Boat

 Build time 3 – 4weeks
Includes 6 kevels, one bulk head
190 hp Mercury4.3 liter I/O motor
4 spud wells and control stand
Built in Illinois
Price on request
Builder can install any motor size from 3.0 liter to 7.4 liter motors.
Owner also has a Volvo Diesel I/O moor that he can install – anywhere from 98hp to261 hp.
Call for prices on different motor combinations

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index



Here are some of the work boats we currently have listed for sale.
Use your mouse to click on the file number to see more details and in most cases additional  photos.

Head on over to the Subscribe Page  if you would like updates on New or Updates on Listings in this section.
Subscribe Now

(listed according to size)
31.5′ x 8.4′ 1974 31.5′ x 8.4′ Aluminum Jet Boat

4.75′ Moulded depth, 18″ draft
Max cruising speed 48 mph
Powered by GM 5.7L 350 inboard
Both engines and carbs rebuilt 2016
2 Berkley drives – jets
Fuel capacity roughly 400 litres
12 passenger
Viking fire system
3 axle trailer included
Built in Alberta

Quebec SOLD!
W2328185' x 38' x 14'Dive/Utility Vessel
2 EMD 645
36 persons
25 ton pedestal crane
Louisiana$255,000 USD
New Price
W2327177' x 38' x 14'Dive/Utility Vessel
(2) EMD 8-645-E2
35 persons, 11 staterooms
15 ton pedestal crane
Louisiana$255,000 USD
New Price
170' x 28' x 11'1980 DP1 Class Offshore Supply Vessel
USCG Certified and ABS Loadline
286 Gross tons/194 Net tons
(2) 16V149 Detroit Diesels - 1800 BHP
(2) Detroit 6V-71N 150KW generators
Cruise speed: 10 knots
Bollard pull: 15.8 ST
Deck Cargo: 600 LT
Deck area: 3,095 ft
Accommodations: 16 persons
Louisiana$1,650,000 USD
118' x 44' x 7'1994 Trash Skimmer
Built to ABS Maltese A1 Standards
Could easily be converted to oil skimmer
Twin Cummins KTA 28 - 750 hp turning
Schottel drives
(2) Cummins 200kw gensets
70kw standby generator
Deck has 2 skimming or moon pools
Hydraulic telescoping Appleton crane
Rated at 44,000 lbs at all radiuses
New York State$350,000 USD
New Price
W2361110' x 28' x 9' (max)1980 1200 hp Utility Vessel
Gross Tons: 81
Powered by: (2) Detroit 16V-92 with Twin Disc MG521
(2) 40kw Detroit Gensets
Fuel Total: 20,000 USG
Louisiana$180,000 USD
93' x 20' x 6'1980/2005 Steel Expedition Yacht
Twin 480 hp TMD Volvo Penta Engines
40KW CAT 3 phase generator
16KW CAT - single phase generator
NUVair Nitrox dive compressors
Full Dive gear for 6
(2) Underwater mounted cameras
(3) Underwater lights
Village Marine Watermaker
SOLAS Life Raft
17' Zodiac tender with Honda 90
Hobe Kayak w/pedals/sail
3000 Steelhead crane
CaliforniaNot available at this time
T238791'8" x 26'10" x 12'6"1960 1450 hp Tug
GRT: 201, Net: 76
EMD 12-645-E2
Variable pitch prop
QuebecPrice on request
T238683.5' x 20.5' x 8'1963 Harbor, Inland and Coastal Towing Tug, 1600 hp, 117.45 GRT, last drydock 2014, heavy duty fendering, etc.OntarioDEAL PENDING
73' x 17 x 10'1969 Aluminum Work Boat
Built by Halter Boats, New Orleans, LA
(2) Detroit Diesel 6 cyl 60 Series
- total 1050 hp, year 2008
- 800 hours since overhaul in 2011
(2) Twin Disc MG 514A 2.5:1 gears
Lima 75KW, 208V genset
Palfinger K 4100 deck crane
Accommodations for 2
See listing for available dive equipment
Ontario$150,000 USD
19.05m x 6m x 1.35m
1980 Steel EX CCGS Buoy Tender
GRT: 79.78 tons
NRT: 33.34 tons
Engines: (2) NT855-M2 - 189 KW each
Transmissions: (2) Twin Disc 4G5114SC
Generators: (2) CAT 3304 = 53KW
Hiab Sea Crane 200- lift cap. 9,100 kg
Manual crane arm boom - lift cap. 900 kg
Metalcraft 4.2m workboat - 50 hp outboard
Accommodations for 5
Galley, mess and lavatory facilities
Ontario$499,000 CDN
17.67m x 4.48m x 1.48m
1991 Wood Covered with Fiberglass
10 Ton Cargo/Passenger/Work Boat
Built in Maldives
Gross tonnage: 9.2 tons
Certified for 15 passengers
Certified for 10 ton cargo
Volvo Penta TAMD41 - 175 hp
Twin Disc transmission
Cruising speed: 9 knots
Maldives$141,750 USD
W235150' x 16' x 4' draftNew twin screw hull
3/16″ thick hull , heavily framed
Would be good for a workboat
Or for a pleasure tug
Ontario$19,500 CDN
New Listing
50’ x 15.5’ x 5.5’1961 Steel Tanker (Refueling vessel)
Double bottom
Canada Coast Guard certified tanker
Capacity: 23,000 litres in 4 compartments
Volvo MD100B – 155 hp
Capital transmission
Always in fresh water
Ontario$109,000 CDN
50' x 14.6' x 7.6'

1971 Steel Hull/Aluminum Cabin Pilot Boat
Built by Gladding Hearn Shipbuilding
Gross tonnage: 41 tons
Net tonnage: 28 ton
Detroit Diesel 12V-71 engine - 480/504 hp
Twin Disc MG514 3:1 transmission
Cruising speed: 10 knots
Maine$63,999 USD
13.35m x 3.96m
x .75m
(2) 44' Fast Coastal Patrol Boats
Deep V- planning hull - mono-hull
Speed: 40+ knots
Twin Volvo-Penta D12-650
Total 1,300 hp
Large cockpit with helm and
AIS station
Equipped galley.
Cabin for crew
These boats are suitable for
coast guard, harbour master,
marine police and etc and are
ready to go to work.
Turkey$799,000 USD each
T239945' x 13' x 5'1954 Tug, Powered by 8V-71 365hp, 2200 hrs,, Gross tons 15, Net 10, 20KW generator, 20 ton winchMichigan$75,000 USD
New Listing
45' X 14.5'1982 Gladding Hearn Built Crew Boat
Steel hull/ aluminum cabin
Twin QSM11 535hp Diesel Engines (yr 2000)
Cruising speed: 20 to 26 knots
12KW generator
Can carry up to 15 persons
Boat has always been in fresh water
New York State$155,000 USD
41' x 14' x 4'1982 Aluminum Work Boat/Crew Boat, powered by Cummins VT903M 340hp, 500 US gallon fuel tank, this boat is ready to go!OntarioSOLD!
41' x 13'6"1978 UTB
Twin Cummins 300 hp
Fire pump
350 gallon fuel capacity
New York StateSOLD!
C206840' x 12' x 3'6"1984 Willard Fiberglass Crew/Work Boat, Powered by 6-71 260 hours on engine, needs pressure washing - otherwise good to go!British Columbia$17,900 CDN
40’Metalcraft Aluminum Fire & Rescue Boat
Sample is shown on listing
Can be ordered
OntarioPrice on request
11.63m 3.8m x
4.2m (molded depth)
2009 Amphibious Landing Craft LARC Type
Built in Ireland of marine grade aluminum
Licenced to carry 48 passengers or cargo
It has 6 sealed compartments below deck
Engine: Perkins Model1106D 175 hp
Cruising speed: 5 knots
Can drive up on a beach
Can be transported by road
IrelandPrice on request
T236337'9" x 13'6" x 7'7"1987 Twin Screw Aluminum Work/Tug/Pilot Boat
12 passenger
18.73 Gross tons
14.05 Net tons
Cruising speed 27 knots
Quebec$175,000 CDN
36.1' x 13' 1944 Chrysler Sea Mule Tug/Work Barge
4' draft, clam bucket crane, backhoe, hydraulic hammer, winch and crane boom
36' x 11' x 3'7"Steel hull project boat - truckable
Chris Craft Roamer hull
Perkins Model G354 - 125 hp
Large quantity of parts are included
Located in
Ontario$15,750 CDN
35' x 12' x 3.2'1973 Twin Screw Crew/Dive Boat
w/COI for 14
(12 divers plus 2 crew)
Aluminum - built in Lourenville, LA
Gross tonnage: 11 tons
Net tonnage:8
Last survey: July 2010
John Deere 6068- 300 hp - year 2002
Davit crane, dive ladder, dual helms
Michigan$138,000 USD
LC212733' x 10'New Steel Landing Craft with Pilot House
6' bow gate door
12 ga sides, 10 ga bottom
250hp Evinrude, 200 hours
4000-4500 lb capacity
Triple axle trailer for storing - not highway approved
Port Dover area
$50,000 CDN
33' X 10'

Steel work boat
Cummins motor
Fitted with winch
Quebec$13,250 CDN
W237132' x 11'1983 Fiberglass Work/Survey Boat, 3208 CAT 260hp w/ Twin Disc transmission, nice shape, ready to go!Massachusetts$65,000 USD
or best offer
30' x 11.5'
(2) 1991 Munson Dive/ Work Boats
All aluminum construction
Twin 7.4 liter Crusaders with straight drives
Diver Door
Wide walk arounds
Comfortable cabin
Enclosed head
Flood lights, tow post
New York StateSOLD!
30' x 11.5'

(2) 1983 Gladding Hearn Dive/Work
Aluminum construction
Twin CAT 3116 Diesels - 300 hp ea
Twin Disc transmissions
5 kw generator
Full enclosed cabin
Wide walk aounds
Excellent riding hulls
New York State$58,000 each

Also available
for lease
30’ x 9’ x 3.5’1954 Steel Open Work Boat
Detroit Diesel 4-53/ Borg Warner 3:1 gear
22” propeller
Wisconsin$12,600 CDN
28' x 9'8'

2001 Zodiac Full Cabin RIB
All aluminum construction
Twin Honda 150 hp ea- 4 stroke
Full cabin with heat
4 kw generator
Foam collar
Tri axle trailer with disc brakes
New York State$68,000 USD
W235228' x 8'1985 Converted Lifeboat
Fiberglass hull, aluminum superstructure
4 cyl Westerbeke
Trailer included
Ontario$25,000 CDN
PB200927' x 7'1999 Hike Built Aluminum Patrol Boat w/ Trailer, draft less than 2', 2 150hp Evinrude outboards (2004), twin 50 gal gas tanks, 1999 PJ boat trailer tandem axleVermont$35,000 USD
New Listing
W237026' x 10.5'1980 Aluminum Work Boat, Volvo Penta Twin D3-160A EVC-B (2005), 120 hp, 320 hrs, Sleeps 2Iqaluit Nunavut$25,000 CDN
26’26’ Fiberglass Utility Boat
Antique looking
3-53 Detroit Diesel
Speed: approx 10 knots
Weight 5000 lbs
Ontario$5,500 USD
25' x 10'Steel Work /Push Boat - to be built
Build time 3 - 4 weeks
190 hp Mercury 4.3L I/O
4 spud wells and control stand
6 kevels, one bulkhead
IllinoisPrice on request
25' x 9'6"

1990 25' x 9'6" SeaArk FAST Response Work Boat
Cruising speed 32 mph, tops out at 45 mph
Powered by twin 2007 200hp Evenrude etec outboards
Full fendering all the way around
Tow post, side dive door, spotlight, VHF, radar
Fuel capacity 120 gallons
3' draft with motors down
New York State$62,000 USD
24' x 8'4" X 2' deep
1983 Aluminum Open Commercial Fishing Boat
Built in New York State
24" deep chine to gunnel
Centre console
Still has fish box separations
70 hp 2 stroke Evinrude outboard (works well)
15 hp 4 stroke Honda outboard (standby motor)
Also includes older tandem trailer
Ontario$21,000 CDN
W236824' x 8'2014 Pontoon Work boat with Trailer, 5k capacity crane 16' reach, Mercury 40hp motor, 2015 Shorelander trailerMichigan$35,000 USD
New Listing
B233823'6 x 8' x 30"2019 Steel Work Barge, double rake, split pipe bump rail, removable push knees, 3' x 8' x 6'8 wheelhouse hinges forward for lower trucking, 6 cleatsOntario
(Port Dover)
$18,000 CDN
W237721' x 8' 2009 Steel Work Boat with Trailer, Evinrude Etec 300hp (2010), 15 hours on motorOhio$27,500 CDN
W236720' x 8'2019 Steel Push Boat, c/w console, push knees, motor bracket, 1 hatch, 1 coat primer, light draft 8"Ontario$13,000 CDN
W2366<19' x 7'6" x 32"2019 Steel Work Boat,
10 gauge steel
Port Dover, Ontario$8,500 CDN
New Listing!

19' Steel Work Boat
Ontario$5,040 CDN
18' 4"x 94"Aluminum Tiller Boats
Custom built
Weight 946 lbs
30" sides
Cargo capacity listed 1400 lbs
Have wide gunnels and are self bailing
Checker-plate water-tight decks
Seating can be customized
Ontario$11,500 CDN
W235017' x 6'6" x 2'2000 Workboat - NEEDS MECHANICAL - with trailer
120 hp MerCruiser inboard outboard
Hull in good shape
Went like a scared cat!
Ontario$3,000 CDN
New Listing
W235717' x 6.5' x 1'Steel Flat Bottom Jet Propelled Work Boat
Jet: Hamilton Jet
Engine: 302 Ford Mercruiser- gas
Top speed 30 to 35mph
Includes single axle trailer
Ontario$4,000 CDN
W237316' x 5'Steel Workboat
No motor
(near Port Dover)
$3,000 CDN
14’ to 20’
x 4’ to 8’
Steel outboard
Work boat
OntarioPrices on Request
4’ x 6’Fully enclosed aluminum pilothouse
Basic structure only
Ontario$7,250 CDN
SP223711'6" long x 80" w x 80" hSteel wheelhouse
11'6" long x 80" w x 80" h
Ontario$7500 CDN or best offer

Please contact us for further information
Scruton Marine Inc.   Phone 519-583-1636  

Return to index