Tag Archives: crane

CREW BOATS, DIVING EQUIPMENT, FEATURED LISTINGS, PATROL BOATS, WORK BOATS, YACHTS/PLEASURE CRAFT

30′ x 11′ Hike Aluminum Crew/Dive/Work Boat w/ Built-in Commercial Diving System – JUST LISTED!!!

C2076

CREW BOATS, DIVING EQUIPMENT, FEATURED LISTINGS, PATROL BOATS, WORK BOATS, YACHTS/PLEASURE CRAFT

C2076

C2076

1993 30′ x 11′ Hike Aluminum Crew/Dive/Work Boat w/ Built-in Commercial Diving System

    • PRICE: $200,000 USD or Best Offer
    • This versatile Hike boat with great lines is in great shape, has no corrosion, and has been in fresh water her entire life
    • Built by Hike Metal in Wheatley, Ontario
    • Draft: 2′
    • Powered by Twin Volvo Penta  7.4 GI 310 hp each
    • Starboard engine was replaced in 2014
    • Cruises at 18-19 knots, fuel consumption 16 gph
    • Twin 100 gal fuel tanks for 200 gal total fuel capacity
    • Shell plate thickness 1/4″
    • Large stern deck approx 11′ x 12′ with fold down transom
    • Headroom is approximately 6’8
    • Heated cabin
    • Suspension/shock seats
    • V-berth for 2
    • 4 compartments providing lots of storage
    • Electronics: Raytheon radar, Icom radios, Garmin GPS, Depth Sounder, Isolation transformer
    • Battery Charger: Charles 93-IMC60-A
    • Building the diver breathing air compressor, generator, volume tank, emergency gas cylinders, diesel fuel tank etc. into the machinery space under the deck gives you an open deck for auxiliary equipment materials etc.  An unobstructed work area that would normally be occupied by the diving equipment.
    • Modifications and Built-in custom Commercial Dive Station
      • Generator: Northern Lights M733 9 ~ in sound shield
      • Air Compressor: Powerex Model 0BS050716.7 SCFM @ 100 PSI, 5 hp Three phase through a Yaskawa V1000, Variable frequency drive
      • High Pressure Air System: Three (3) Kaplan Industries 250 CF high pressure steel cylinders banked together
      • Low Pressure Air Tank: 30 gal steel receiver only Campbell Hausfeld DWG AR8028
      • Diver Air System: Custom Design and Fabrication (Arnie Monk)
      • Deck Crane: Western Mule M2000
    • Location: New Jersey

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636

BARGES, FEATURED LISTINGS, MARINE, MISCELLANEOUS, WORK BOATS

B2385

B2385

2013 40′ x 14′  Steel Spud Barge w/Crane (Sides Fold for Trucking!)

  • SOLD!
  • The fold-up sides on this handy crane barge make it truckable 
  • Shell plate thickness 1/4″
  • Sides are 2.5′ high
  • Spuds are 6″ x 6″, 20′ long
  • Powered by 2 Mercury 150hp outboards (2013)
  • 1 hatch, 3 bulkheads
  • Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
  • Crane has 3/8″ cable and at 37′ will pick 4,000 lb
  • Hydraulic steering
  • Location: Western Michigan

Details are deemed to be correct but are not guaranteed and should be independently verified. 

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636
Return to index

CRANES AND EXCAVATORS, FEATURED LISTINGS

CR2100

CR2100

Dragline Fairlead

  • Price: $4,000 USD
  • Can easily be adapted to marine use
  • 20″ diameter sheaves, grooved for 1.5″ wire
  • 2 rollers are 24″ x 5″
  • 2 top and bottom rollers are 4″ x 4″
  • The throat has a little wear but not much
  • The rollers are free and not worn out
  • It’s most likely from a Bucyrus or a Northwest
  • Located in New York State

Details are deemed to be correct but are not guaranteed and should be independently verified. Call us at 519-583-1636 for more info!

Return to Listings