W2422
1989 34′ x 10’5 Aluminum SeaArk Crew/Work/Dive Boat
- SOLD! YOU JUST MISSED IT!!
- 3′ draft
- Potential to be a great dive boat with stbd dive door and aft dive platform
- Twin Cummins 6BTA 5.9 M2 Diesel Engines – Stbd engine 10,000 hours, Port engine is in need of repair or total replacement. Recommend retrofitting to new outboard motors in lieu of current configuration
- Konrad 620 Stern Drives – New
- Bam 1500 Diesel Plug in Transmissions – New
- Aluminum V Hull is in excellent condition
- Custom davit with high-speed winch
- Three (3) commercial VHF radios
- Radar
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2417
2023 16’6 x 6′ Steel Workboat
- Price: $6,500 CDN
- Built to order
- 12 gauge bottom, 14 gauge sides
- 20″ transom
- Epoxy primed and painted
- Makes the perfect little run-about!
- Located in Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2426
2005 36′ x 13’6 SeaArk Dauntless Aluminum Patrol/Work/Crew Boat
- SOLD!
- Classic Ray Hunt designed vessel with a deep-vee variable deadrise hull for a smooth ride
- Draft approx 4′
- 1700 hours on 370 hp Yanmars
- Cruises at 25 knots
- 400 gal fuel capacity
- 3 transverse watertight bulkheads
- 7kw Northern Lights generator
- Heat and air conditioning
- Marine head
- Full galley
- 50 gallon potable water capacity
- Dry weight approximately 15,000 lb
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2429
1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat
- Price: $220,000 USD
- With fresh coatings and loads of updates, she’s ready to get to work!
- Former US Coast Guard vessel
- 4′ draft
- Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours
- ZF gears
- Electronics: 2 – 12″ Garmins, 2 VHF, radar
- New shafts, cutless bearings, couplings, props just reworked
- New bottom and hull paint
- Comes with lots of spare parts
- Location: Mississippi
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2427
1974 31’6 x 8’5 Aluminum Work/Crew Boat & Trailer
- Price: $75,000 CDN
- This rugged workboat has been re-powered and she’s ready to get the job done!
- 18″ draft
- GRT:5.71
- Powered by 2 Mercury MerCruiser Quicksilver 350 MPI, year: 2019
- Total hp: 520
- Berkley jet drives: 2019
- New wiring: 2019
- Fuel capacity 400 litres
- 12 passenger
- Viking fire system
- Electronics: VHF, Garmin 721xs GPS
- 3 axle trailer included
- Location: Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2387
1985 21′ x 8′ Aluminum Work Boat w/ Trailer
-
- SOLD! YOU JUST MISSED IT!!
- Draft 32″
- Shell plate thickness: 1/4″ bottom, 3/16″ sides and deck and pilothouse
- ***Requires a new engine. (Was powered by: Volvo Penta AD41P-A, 200 hp.)
- Fuel capacity: 200 litres
- Volvo Duo Prop
- Other: Ritchie compass, cable steering, 2+ manual bilge pumps, Webasto AT2000D heater
- Location: Quebec
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
