Tag Archives: work boat

FEATURED LISTINGS, WORK BOATS

W2387

W2387

1985 21′ x 8′ Aluminum Work Boat w/ Trailer

    • SOLD! YOU JUST MISSED IT!!
    • Draft 32″
    • Shell plate thickness: 1/4″ bottom, 3/16″ sides and deck and pilothouse
    • ***Requires a new engine. (Was powered by: Volvo Penta AD41P-A, 200 hp.)
    • Fuel capacity: 200 litres
    • Volvo Duo Prop
    • Other: Ritchie compass, cable steering, 2+ manual bilge pumps, Webasto AT2000D heater
    • Location: Quebec

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636

FEATURED LISTINGS, WORK BOATS

W2423

W2423

1995 19′ x 8’6 SeaArk Aluminum Work Boat

  • Price: $30,000 USD
  • She’s a small boat with a big heart and ready to get to work!
  • 18″ draft
  • Mercruiser 5.0 MPI, 260 hp
  • VHF radio
  • Location: New York State

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636

FEATURED LISTINGS, WORK BOATS

W2313

W2313

1969 73′ x 17′ Halter built  Aluminum Work Boat

 SOLD!

Built by Halter Boats, New Orleans, LA
Molded Depth: 3.05m, Draft 1.22m
Gross tonnage: 43 tons
Net tonnage: 32tons
Shell plate thickness: 5/16″
Framing: 3″x 5/16″ @ 1″C
Bulkheads: 1/4″
Headroom: Wheelhouse & Cabin – 6’4″, Engine room – 5′
Last survey: 2012 (Transport Canada)
(2) Detroit Diesel 4 stroke, 6 cyl 60 Series –   – total 1050 hp, year 2008, 800 hours since complete overhaul 2011
(2) Twin Disc MG514A 2.5:1 gears
Shafts size: 2.5″
Propellers: Twin 32″ x 32″, 3 blade fixed pitch, bronze
Steering: Hydraulic
Cruising speed: 17 knots
Fuel capacity: 2000 liters
Generator: Detroit Diesel 4-71 drives Lima 75KW, 208V@60 hertz  
Navigation equipment: Radio:2, GPS: Simrad, Radar: Furuno, Depth sounder: Furuno Echo FCV-585Loran C, Compass, Direction Finder, Auto Pilot: Comnav 1001, Other:  Main engine display monitors, Rudder Indicators, Furuno AIS, Stern engine controls w/25′ tethered control option

Safety equipment:   2 – 12man inflatable life rafts w/hydrostatic releases,   4 – 36″ life rings   16 adult life jackets,   EPIRB,   Bilge/ fire electric fire pump plus enginefitted pulley drive 1.5″ fire pump,   Numerous hydrants and hoses
Winches: Hydraulic anchoring winches w/ 800 ft cable
Bilge pumps: 2
Deck wash pump:with fire pumps
Furnace: Diesel fired hot water boiler
Accommodations: 2 forward bunks, galley w/ full fridge, microwave
Head: VacuFlush
Holding tankcapacity: 50 gal

Additional Features:
Palfinger PK 4100 deck crane w 300ft cable, pipe vise, Aluminum tool and storage boxes. Hydrocell D40 hydraulic water pump, Main compartment work bench w/ drawers. Tool drawers and parts storage bins

Vessel was fitted specifically as a commercial dive boat. The following equipment has been removed but may be available:

  • Nuvair / Coltri HP compressor fitted for DNX Nitrox System, 12 bottle HP storage bank, 9 bottle O2 storage rack.
  • Two diver control panel, Nitrox mixing panel, O2, CO, CO2 monitors, Amron 2825 two diver radio
  • 2 x 300ft umbilicals w/ hot water hose for helmet and gloves. Diver access ladder.

 Located in Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.  Phone 519-583-1636
Return to index

FEATURED LISTINGS, PUSH BOATS, TUG BOATS, WORK BOATS

T2427

 T2427

1966 41.9′ x 12.4′ Twin Screw Model Bow Tug 

  • SOLD! YOU JUST MISSED IT!
  • Draft: Approx. 5′ 6″
  • GRT: 22, NRT: 10
  • Approximate displacement:  26,000 lbs.
  • Shell plate thickness est 3/8″
  • Used in fresh water only
  • Engines:  Detroit Diesel 6-71, keel cooled, 220 hp each
  • Transmissions:  Allison model MH20R
  • Prop Shafts: 4” diameter stainless steel
  • Propellers:  48″, 4 bladed
  • Push knee fitted with two 8″ x 2″ x 5′ tall rubber fenders
  • Additional fendering: 2 port side and 3 stbd side 33″ long split tire fenders mounted on bulwarks forward, 7 port side and 6 stbd side tire fenders and a split tire rubrail around the elliptical stern
  • Two-tiered rub rail
  • Winches- port and starboard Nabrico Wintech winches w/ 5/8″ diameter galvanized steel cable
  • Generator – Yanmar Model YDG 5500 EV-E diesel powered, 5500 Watt portable generator
  • Bunk room below offers ample storage space
  • Last survey October 2022
  • Not subchapter M compliant
  • Location: New York State
  • File Ref T2427

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index