Here are some of the work boats we currently have listed for sale.
Use your mouse to click on the file number to see more details and in most cases additional photos.
Head on over to the Subscribe Page if you would like updates on New or Updates on Listings in this section.
Subscribe Now
| FILE # | DIMENSIONS (listed according to size) | DESCRIPTION | Location | PRICE |
|---|---|---|---|---|
W2346 | 31.5′ x 8.4′ | 1974 31.5′ x 8.4′ Aluminum Jet Boat PRICE: $59,000 CDN 4.75′ Moulded depth, 18″ draft Max cruising speed 48 mph Powered by GM 5.7L 350 inboard Both engines and carbs rebuilt 2016 2 Berkley drives – jets Fuel capacity roughly 400 litres 12 passenger Viking fire system 3 axle trailer included Built in Alberta | Quebec | $49,000 CDN |
W2328 | 185' x 38' x 14' | Dive/Utility Vessel 2 EMD 645 36 persons 25 ton pedestal crane | Louisiana | $255,000 USD New Price |
W2327 | 177' x 38' x 14' | Dive/Utility Vessel (2) EMD 8-645-E2 35 persons, 11 staterooms 15 ton pedestal crane | Louisiana | $255,000 USD New Price |
W2267 | 170' x 28' x 11' | 1980 DP1 Class Offshore Supply Vessel USCG Certified and ABS Loadline 286 Gross tons/194 Net tons (2) 16V149 Detroit Diesels - 1800 BHP (2) Detroit 6V-71N 150KW generators Cruise speed: 10 knots Bollard pull: 15.8 ST Deck Cargo: 600 LT Deck area: 3,095 ft Accommodations: 16 persons | Louisiana | $1,650,000 USD |
W2345 | 118' x 44' x 7' | 1994 Trash Skimmer Built to ABS Maltese A1 Standards Could easily be converted to oil skimmer Twin Cummins KTA 28 - 750 hp turning Schottel drives (2) Cummins 200kw gensets 70kw standby generator Deck has 2 skimming or moon pools Hydraulic telescoping Appleton crane Rated at 44,000 lbs at all radiuses | New York State | $350,000 USD New Price |
W2361 | 110' x 28' x 9' (max) | 1980 1200 hp Utility Vessel Gross Tons: 81 Powered by: (2) Detroit 16V-92 with Twin Disc MG521 (2) 40kw Detroit Gensets Fuel Total: 20,000 USG | Louisiana | $300,000 USD |
T2367 | 95' x 26' x 12' | 1960 2000hp Single Screw Tugboat 196 tons, 16-645 E3 EMD 2000 hp main engine, 5 staterooms, good condition | New York State | $70,000 USD NEW PRICE |
P2326 | 93' x 20' x 6' | 1980/2005 Steel Expedition Yacht Twin 480 hp TMD Volvo Penta Engines 40KW CAT 3 phase generator 16KW CAT - single phase generator NUVair Nitrox dive compressors Full Dive gear for 6 (2) Underwater mounted cameras (3) Underwater lights Village Marine Watermaker EPIRBs SOLAS Life Raft 17' Zodiac tender with Honda 90 Hobe Kayak w/pedals/sail 3000 Steelhead crane | California | Not available at this time |
T2387 | 91'8" x 26'10" x 12'6" | 1960 1450 hp Tug GRT: 201, Net: 76 EMD 12-645-E2 Variable pitch prop | Quebec | Price on request |
T2386 | 83.5' x 20.5' x 8' | 1963 Harbor, Inland and Coastal Towing Tug, 1600 hp, 117.45 GRT, last drydock 2014, heavy duty fendering, etc. | Ontario | $149,000 USD |
W2313 | 73' x 17 x 10' | 1969 Aluminum Work Boat Built by Halter Boats, New Orleans, LA (2) Detroit Diesel 6 cyl 60 Series - total 1050 hp, year 2008 - 800 hours since overhaul in 2011 (2) Twin Disc MG 514A 2.5:1 gears Lima 75KW, 208V genset Palfinger K 4100 deck crane Accommodations for 2 See listing for available dive equipment | Ontario | $230,000 CDN |
FV2123 | 64.5' x22.2' x 5.6' | 1946/1989 Great Lakes Commercial Fishing Vessel/Work Boat Built in 1946 by Erieau Shipbuilding and Drydock Co. Rebuilt in 1989 by Hike Metal, Wheatley, Ontario Shell plate thickness: 1/4" steel Gross tonnage: 128.61 tons Net tonnage: 85.91 tons Engine: 325hp Cummins MTA855AM - 26,785 hrs Generator: 22.5KW Accommodations, Head, galley and 6 berths Crossley hydraulic net puller New photos have been added to the listing | Ontario | $157,500 CDN |
S2044 | 19.05m x 6m x 1.35m | 1980 Steel EX CCGS Buoy Tender GRT: 79.78 tons NRT: 33.34 tons Engines: (2) NT855-M2 - 189 KW each Transmissions: (2) Twin Disc 4G5114SC Generators: (2) CAT 3304 = 53KW Hiab Sea Crane 200- lift cap. 9,100 kg Manual crane arm boom - lift cap. 900 kg Metalcraft 4.2m workboat - 50 hp outboard Accommodations for 5 Galley, mess and lavatory facilities | Ontario | $499,000 CDN |
T2325 | 60' x 20' x 6.5' | NEW 405 hp Harbor Work Boat - To be built Built for general harbor work, ice breaking salvage and dive operations Cummins Marine QSM11 Diesel - 405 hp Twin Disc MG5114 gear Maximum speed: 10 knots 27.5 KW Onan generator Fire fighting equipment Telescopic boom marine crane Recessed diving platform | Ohio | Price on request |
W2277 | 17.67m x 4.48m x 1.48m | 1991 Wood Covered with Fiberglass 10 Ton Cargo/Passenger/Work Boat Built in Maldives Gross tonnage: 9.2 tons Certified for 15 passengers Certified for 10 ton cargo Volvo Penta TAMD41 - 175 hp Twin Disc transmission Cruising speed: 9 knots | Maldives | $141,750 USD |
T2376 | See listing for additional photos | 2 Tugs and 2 Barges Package 1. 1964 52' x 16.5' x 6' Model Bow Tug 2. 1954 45' x 12.5. x 6' Ex Army Tug 3. 2012 10' x 40' 30' (3 pc) sectional barge 4. Late 1960's 32' x 62' x 6' barge with deckhouse and spuds | New York State | $250,000 USD |
W2351 | 50' x 16' x 4' draft | New twin screw hull 3/16″ thick hull , heavily framed Would be good for a workboat Or for a pleasure tug | Ontario | $19,500 CDN New Listing |
W2137 | 50’ x 15.5’ x 5.5’ | 1961 Steel Tanker (Refueling vessel) Double bottom Canada Coast Guard certified tanker Capacity: 23,000 litres in 4 compartments Volvo MD100B – 155 hp Capital transmission Always in fresh water | Ontario | $109,000 CDN |
W2281 | 50' x 14.6' x 7.6' | 1971 Steel Hull/Aluminum Cabin Pilot Boat Built by Gladding Hearn Shipbuilding Gross tonnage: 41 tons Net tonnage: 28 ton Detroit Diesel 12V-71 engine - 480/504 hp Twin Disc MG514 3:1 transmission Cruising speed: 10 knots | Maine | $63,999 USD |
PB2004 | 13.35m x 3.96m x .75m | NEW- READY TO BE DELIVERED (2) 44' Fast Coastal Patrol Boats Deep V- planning hull - mono-hull Speed: 40+ knots Twin Volvo-Penta D12-650 Total 1,300 hp Large cockpit with helm and AIS station Equipped galley. Cabin for crew These boats are suitable for coast guard, harbour master, marine police and etc and are ready to go to work. | Turkey | $799,000 USD each |
T2399 | 45' x 13' x 5' | 1954 Tug, Powered by 8V-71 365hp, 2200 hrs,, Gross tons 15, Net 10, 20KW generator, 20 ton winch | Michigan | $75,000 USD New Listing |
C2065 | 45' X 14.5' | 1982 Gladding Hearn Built Crew Boat Steel hull/ aluminum cabin Twin QSM11 535hp Diesel Engines (yr 2000) Cruising speed: 20 to 26 knots 12KW generator Can carry up to 15 persons Boat has always been in fresh water | New York State | $155,000 USD |
C2061 | 45' x 14' | 1957 Steel Hull/Aluminum Cabin Crew Boat/ Dive/Survey/Patrol/Research Boat Engines: Twin 8V-71 Detroits Generator: 15 KW Onan Speed: 18 knots Fuel capacity: 350 gal This vessel is being repainted and interior redone | Mississippi | On charter until 2019 |
T2395 | 43' x 13' x 4'7" | 400 hp Work Tug, turn key, 12.34 GRT, Powered by CAT 3406, MG5114 3:1 | Ontario | $175,000 CDN New Listing |
W2337 | 41' x 13'6" | 1978 UTB Twin Cummins 300 hp Fire pump 350 gallon fuel capacity | New York State | $75,000 USD |
W2095 | 40’ | Metalcraft Aluminum Fire & Rescue Boat Sample is shown on listing Can be ordered | Ontario | Price on request |
FV2132 | 40' x 10' x 3' | 1948 Steel Trap Net Fishing Boat Built in Goderich, Ontario Gross tonnage: 11.40 Net tonnage: 10.61 Bulkheads: 3 Engine: Detroit Diesel 6-71 - 200 hp Transmission: Allison 3:1 ratio Boat needs some work - being sold "as is, where is" | Ontario | $35,000 CDN |
FV2131 | 39.8' x 12.6' | 1950 Steel Trap Net Boat Built in Ohio, licensed in Ontario, Canada Gross tonnage: 6.7 tons Bulkheads: 2 Twin "Beast" GM Diesel Engines - 250 hp ea | Ontario | $56,500 CDN |
PV2212 | 11.63m 3.8m x 4.2m (molded depth) | 2009 Amphibious Landing Craft LARC Type Built in Ireland of marine grade aluminum Licenced to carry 48 passengers or cargo It has 6 sealed compartments below deck Engine: Perkins Model1106D 175 hp Cruising speed: 5 knots Can drive up on a beach Can be transported by road | Ireland | Price on request |
T2363 | 37'9" x 13'6" x 7'7" | 1987 Twin Screw Aluminum Work/Tug/Pilot Boat 12 passenger 18.73 Gross tons 14.05 Net tons Cruising speed 27 knots | Quebec | $175,000 CDN |
B2316 | 36.1' x 13' | 1944 Chrysler Sea Mule Tug/Work Barge 4' draft, clam bucket crane, backhoe, hydraulic hammer, winch and crane boom | Illinois | $20,000 USD |
P2362 | 36' x 11' x 3'7" | Steel hull project boat - truckable Chris Craft Roamer hull Perkins Model G354 - 125 hp Large quantity of parts are included Located in | Ontario | $15,750 CDN |
C2047 | 35' x 12' x 3.2' | 1973 Twin Screw Crew/Dive Boat w/COI for 14 (12 divers plus 2 crew) Aluminum - built in Lourenville, LA Gross tonnage: 11 tons Net tonnage:8 Last survey: July 2010 John Deere 6068- 300 hp - year 2002 Davit crane, dive ladder, dual helms | Michigan | $138,000 USD |
W2047 | 34’ x 10’ | Steel work boat hull – no power | Ontario | $3,500 CDN |
W2330 | 33' x 10.5' | 2003 Aluminum Zodiac Ex-US Navy Long Range Harbor Security/Work Boat Twin Cummins 6BTA5.9-QSB 200 gallon fuel capacity Capacity 12 people Cruise speed 26kts | New York State | $99,000 USD OR BEST OFFER |
LC2127 | 33' x 10' | New Steel Landing Craft with Pilot House 6' bow gate door 12 ga sides, 10 ga bottom 250hp Evinrude, 200 hours 4000-4500 lb capacity Triple axle trailer for storing - not highway approved | Ontario Port Dover area | $50,000 CDN |
W2331 | 33' X 10' | Steel work boat Cummins motor Fitted with winch | Quebec | $13,250 CDN |
W2363 | 32' x 12' | 32 Twin Vee Twin 2017 300 Suzukis with electronic controls, New trailer, New 3-sided enclosure... | Mississippi | $130,000 USD |
W2302 | 30' x 11.5' | (2) 1991 Munson Dive/ Work Boats All aluminum construction Twin 7.4 liter Crusaders with straight drives Diver Door Wide walk arounds Comfortable cabin Enclosed head Flood lights, tow post | New York State | SOLD! |
W2306 | 30' x 11.5' | (2) 1983 Gladding Hearn Dive/Work Boats Aluminum construction Twin CAT 3116 Diesels - 300 hp ea Twin Disc transmissions 5 kw generator Full enclosed cabin Wide walk aounds Excellent riding hulls | New York State | $58,000 each Also available for lease |
W2168 | 30’ x 9’ x 3.5’ | 1954 Steel Open Work Boat Detroit Diesel 4-53/ Borg Warner 3:1 gear 22” propeller | Wisconsin | $12,600 CDN |
W2307 | 28' x 9'8' | 2001 Zodiac Full Cabin RIB All aluminum construction Twin Honda 150 hp ea- 4 stroke Full cabin with heat 4 kw generator Foam collar Tri axle trailer with disc brakes | New York State | $68,000 USD |
W2352 | 28' x 8' | 1985 Converted Lifeboat Fiberglass hull, aluminum superstructure 4 cyl Westerbeke Trailer included | Ontario | $25,000 CDN |
W2121 | 26’ | 26’ Fiberglass Utility Boat Antique looking 3-53 Detroit Diesel Speed: approx 10 knots Weight 5000 lbs | Ontario | $5,500 USD |
W2230 | 25' x 10' | Steel Work /Push Boat - to be built Build time 3 - 4 weeks 190 hp Mercury 4.3L I/O 4 spud wells and control stand 6 kevels, one bulkhead | Illinois | Price on request |
W2329 | 25' x 9'6" | 1990 25' x 9'6" SeaArk FAST Response Work Boat Cruising speed 32 mph, tops out at 45 mph Powered by twin 2007 200hp Evenrude etec outboards Full fendering all the way around Tow post, side dive door, spotlight, VHF, radar Fuel capacity 120 gallons 3' draft with motors down | New York State | $62,000 USD |
FV2134 | 24' x 8'4" X 2' deep | 1983 Aluminum Open Commercial Fishing Boat Built in New York State 24" deep chine to gunnel Centre console Still has fish box separations 70 hp 2 stroke Evinrude outboard (works well) 15 hp 4 stroke Honda outboard (standby motor) Also includes older tandem trailer | Ontario | $21,000 CDN |
B2338 | 23'6 x 8' x 30" | 2018 Steel Work Barge, double rake, split pipe bump rail, removable push knees, 3' x 8' x 6'8 wheelhouse hinges forward for lower trucking, 6 cleats | Ontario (Port Dover) | $18,000 CDN |
W2366 | 19' x 7'6" x 32" | 2018 Steel Work Boat, 10 gauge steel | Port Dover, Ontario | $8,500 CDN New Listing! |
W2332 | 19' | 19' Steel Work Boat | Ontario | $5,040 CDN |
W2207 | 18' 4"x 94" | Aluminum Tiller Boats Custom built Weight 946 lbs 30" sides Cargo capacity listed 1400 lbs Have wide gunnels and are self bailing Checker-plate water-tight decks Seating can be customized | Ontario | $11,500 CDN |
W2350 | 17' x 6'6" x 2' | 2000 Workboat - NEEDS MECHANICAL - with trailer 120 hp MerCruiser inboard outboard Hull in good shape Went like a scared cat! | Ontario | $3,000 CDN New Listing |
W2357 | 17' x 6.5' x 1' | Steel Flat Bottom Jet Propelled Work Boat Jet: Hamilton Jet Engine: 302 Ford Mercruiser- gas Top speed 30 to 35mph Includes single axle trailer | Ontario | $4,000 CDN |
W2006 | 14’ to 20’ x 4’ to 8’ | Steel outboard Work boat | Ontario | Prices on Request |
SP2227 | 8' x 6 1/2" x 9' | Maid of the Mist Wheelhouse Removed from a Maid of the Mist passenger vessel 8' wide x 6 1/2' wide x 9' high Heated windows, AC, heat | Ontario | $10,500 CDN |
W2097 | 4’ x 6’ | Fully enclosed aluminum pilothouse Basic structure only | Ontario | $7,250 CDN |
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636