Category Archives: YACHTS/PLEASURE CRAFT
P2457
P2457
1980 48′ x 13′ 6 Twin Screw Steel Cruiser/Trawler For Sale
New Price: $75,000 CDN
- Scroll down for the YouTube video walk through!
- Draft: 44″
- Shell plate thickness: 1/4″
- NRT: approx 15
- Powered by twin Chrysler Mitsubishi CM6-55 Diesel Engines, 200 hp
- Velvet drive transmission 2.0:1
- Cruises at 7 -8 mph
- 4 blade brass prop on a 2″ stainless shaft
- Solar generator is PROwatt Xantrex
- Fuel capacity: 200 gal (2 x 100 gal tanks)
- Anchor winch
- Davit
- Electronics: Radar, Depth finder, Loud hailer, GPS, VHF radio, compass
- Hydraulic steering
- Galley with 4 burner propane stove w/oven, fridge, freezer
- Head and shower
- Accommodations: super single in wheelhouse, double bed in lounge and aft, cabin has 2 double beds
- Holding tank capacity: 95 US gal approximately
- Freshly painted, clean bilges, no rust
- Standard safety equipment, up to date flares, 4 new fire extinguishers
- Recent survey
- Yard trailer available
- Located on Nipigon Bay, Ontario
Check out the YouTube walk through in the video below!
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636
Return to index
22′ Aluminum Landing Craft Powered by 150hp Yamaha – comes with trailer – Just listed in Ontario!!
LC2148
2024 22′ x 8’6″ Aluminum Landing Craft with Trailer
- PRICE: $109,900 CDN (plus HST)
- She’s got great lines, loads of room and she can really move!!
- LOA about 25′ long with the motor
- Draft is 5″ at the stern and 12″ at the bow
- Powered by 2024 Yamaha 150hp w/ stainless prop , 10 hours… yes, you read that right!
- Top speed: 40 mph
- Fuel capacity: 45 gal
- Bow gate door is electric, 61″ wide
- Deck space ahead of cabin: just under 10′
- Hull thickness: 0.188″
- Self-bailing floor
- Weight: around 3,000 lb
- Deck load capacity: estimated 2,400 lb
- Tow post
- Comes with steel trailer which had new bunks installed in 2024
- Located in Eastern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2450
1970 48′ x 16′ De Vries Lentsch Twin Screw Steel Work Boat Powered by Detroit Diesel
- Price: $65,000 CDN
- Built by the iconic W. De Vries Lentsch Jr. company of Amsterdam
- Draft is 4’3″
- GRT: 30.39, NRT: 22.8
- Powered by 2 Detroit Diesel 6-71
- Gears are Twin Disc MG509 3:1
- 2.5″ shafts with 4 blade props
- In 2021 she received 4 new Cutlass bearings, shafts and props were dye tested – no cracking, props were balanced, and she got new rudder shafts, bearings and seals
- Shell plate thickness 5mm
- Fuel capacity total 6,580 litres (2540 litres port side, 2540 litres stbd, 1500 litres keel tank)
- Fresh water capacity: 1,000 litres
- Generators: 2 x Kohler, 28 EFOZD, 3 phase 120/208, 610 hours each
- Electronics: 2 x VHF, GPS is Furuno GP37, Radars: Furuno enclosed 24″, Raymarine 48″ open color, Depth Sounder: 2 x Raymarine es 128 MFD, Compass: Ritchie Globemaster, Autopilot: Raymarine, Also Raymarine side scan, 1 kw depth sounder
- Windlass is Maxwell HWC3500
- Steering is Sea Star Hydraulic
- Head is Dometic vacuum flush
- Roof AC unit: Dometic with heat & Flagship Marine Chilled Water AC – 48,000 btu 3 phase – 3 x 16,000 btu chilled water fan coils with 2kw heat each
- ***Dive equipment not included***
- Located in Southern Ontario
Check out the video below
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2440
1988 22′ x 10’10” Zodiac Hurricane MK7 For Sale w/Tandem Trailer
- Price: $20,000 CDN or best offer
- Volvo Penta 41 series diesel engine, test run late fall 2023 (runs excellent)
- Boat has foam filled tubes
- Boat needs some love
- Comes with a tandem trailer – bearings are great, new LED lighting and new tires
Located in Port Dover, Ontario, Canada
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2437
2021 25′ x 6’8 Steel & Aluminum Work Boat For Sale w/200 hp Evinrude and Trailer
- New Price: $50,000 CDN
- This is the one you’ve been waiting for!
- Steel hull with aluminum pilot house and sole
- Draft is 6″
- Powered by 200 hp Evinrude E-TEC G2 outboard (2018), 90 hours
- Viper prop
- Cruises at 25 mph
- Electronics: GPS, Direction finder, Depth sounder, Compass
- Hydraulic steering
- Fuel capacity: 25 gallons
- Bilge pump
- Comes with new tandem trailer
Located near Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
LC2146
2023 30′ x 10′ Aluminum Landing Craft For Sale Powered by Suzuki c/w Trailer
- PRICE: $208,000 CDN
- Powered by 2023 Suzuki DF300apx w/ precision controls
- 39 mph top speed at 5600 rpm
- 3/16″ aluminum hull
- 77 gal fuel capacity
- 72″ wide electric bow gate door
- 15.5′ deck space ahead of cabin
- Shallow draft hull design
- Self-bailing floor
- Includes HD adjustable trailer
- Located near Port Dover, Ontario
- Check out the YouTube video below for a virtual ride
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
W2417
W2417
New 16’6 x 6′ Steel Workboat For Sale
- Built to order! Call for a quote today.
- 12 gauge bottom, 14 gauge sides
- 20″ transom
- Epoxy primed and painted
- Makes the perfect little run-about!
- Located in Port Dover, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636