Category Archives: YACHTS/PLEASURE CRAFT

PV2269

File  No.  PV2269

2008  60′ x 16′  Tri-toon  Passenger Boat

Price $295,000 USD

  • Built in Florida
  • Draft is 4.4′ to bottom of stern drive
  • Comfortably accommodates 15-20 on top deck, 20-30 on lower deck
  • Pontoons are 42″ in diameter, 1/8″ aluminum and 5′ long sections with water tight compartments and an inspection port in each pontoon
  • Powered by twin Yanmar 200 hp, 4 cyl diesel engines with Mercury Bravo II stern drives
  • Average speed 12-14 knots
  • Engines are located in port and starboard pontoons
  • 22.5 Kw gen-set located in center pontoon
  • 200 gal diesel fuel tank also in center pontoon
  • All machinery compartments have a fire extinguisher system
  • Vetus bow thrusters in bow of port and starboard pontoons
  • All machinery spaces have bilge pumps with an alarm system
  • Salon is carpeted and paneled in wood, has separate bar area with 3 bay stainless steel sinks, an ice box, and two refrigerators
  • Galley has 2 bay sink with additional hand sink, refrigerator and nicely finished cupboards
  • Large open back deck with 3 hatch covers to access machinery – engines and generator
  • Top deck has canopy cover with drop down clear vinyl curtains, bench seats running down both sides with cushions that snap into place
  • Pilot house is generous in size, walking space in front of pilot house
  • Pilot house controls – hydraulic steering, ZF marine engine controls, vetus bow thrusters 210 lbf, radar
  • 2 heads
  • Vessel is ducted for heat and AC
  • Boat has been well taken care of
  • Located in Vermont
  • More photos available upon request

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information  sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636  

Return to Listings

 

T2393

T2393

2014 38′ x 12’6″ x 4’6″ Tug Boat Hull, 160hp Cummins Engine and Hundreds of Parts – PROJECT BOAT

  • Price: $21,000 USD
  • Hull Material: 10 gauge steel
  • Engine: 160 hp Cummins 6BT, 0 hours
  • Transmission:  Borg Warner Velvet Drive 2.91:1
  • Generator: 4kw EW4200D Entec West
  • Included in the sale of this hull are all parts the owner purchased that were going to be used in the building of this tug including sump pump, bow thruster, hydraulic fittings and hoses, marine grade wiring harnesses
  • The list of items that comes with this outfit is too long to list here.  Here is a partial listing
    • 1 Mar inverter model 12 300A
    • Triplite DC power supply
    • (2) 180 gal aluminum tanks
    • (2) 100 gal water tanks
    • (2) waste water tanks
    • (2) hydraulic tanks
    • (5) livewell pumps
    • (8) Yale 5/16″ x 25′ black deck lines
    • (2) Danforth anchors
    • (1) Raritan Crown head with pump
    • (1) Jabsco Macerator pump
    • (1) Lovett 1200 12 volt bilge pumps
    • (1) Bowmar inspection hatch
    • Rayline search light
    • Isotherm fridge

Location: Michigan

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 

 

 

 

 

 

 

 

T2392

21′ x 9’3″ x 3′ 2016  Aluminum Tug w/ Trailer

  • Price: $53,000 CDN
  • Shell plating: 3/16 Aluminum
  • Power: Yanmar 4JH3E, 56hp, 50 hours, rebuilt as new in 2016
  • Transmission: Kanzaki KM4A
  • Cruising speed: 7 knots
  • Electronics: Radio – Uniden, GPS – Lowrence Elite 7 M,  Direction Finder – Elite 4X, Depth Sounder – Elite 4X, Compass
  • Steering: Sea star hydraulic
  • Prop: 22 x 12 bronze, 1 1/2″ shaft SS 316
  • Fuel capacity: 65 litres
  • Fuel consumption: 2L per hour at 1800 rpm
  • Headroom Wheelhouse: 6′
  • Last survey: 2016
  • Trailer: Yes

Location: Quebec

 Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 

 

 

 

 

 

 

 

P2409

File No.P2409

 


   

1980 50′ x 15′ x 2’2″Steel Custom River Boat/Charter Yacht

Price $55,000 CDN

  • Gross tonnage: 24 tons
  • Shell plate thickness: 3/16″
  • Framing: 1/2″ x 3 1/2″ cross frames and 10 gauge for upper works
  • Headroom: Wheelhouse – 7′, Cabin – 7′,Engine room – 7′
  • Twin 150 hp BMW Turbo Diesel  I/O with full tilt capacity – 1400 hours
  • Cruising speed: 6/8 knots
  • Steering; Hydraulic
  • Fuel capacity: 900 gal
  • Fuel consumption: approx 1 nm per liter
  • Navigation equipment: VHF Radio, Depth Sounder, Compass
  • Anchors: Two large Danforth and one Kedgeanchor
  • Accommodations: 12/14
  • Fresh water capacity: 300 gal
  • Holding tank capacity: 50 gal
  • Head, sink and shower
  • Electrical: 12V
  • Fully equipped galley
  • Can accommodate 35 guests on her deck
  • Safety equipment: Flares, buckets, axes, 40+life preservers, life ring, ladder
  • Bilge pumps: Three

Due to low profile and shallow draft this boat is ideal for shallow water navigation – can transit all canals in eastern North America

Located in eastern Ontario

 Details are deemed to be correct but are not guaranteed and should be independently verified

Pleasecontact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

 

W2350

File No. W2350

2000 17′ x 6’6″ x 2′  Workboat (Needs Mechanical) and trailer
PRICE: $3,000 CDN

  • 120 hp MerCruiser inboard outboard
  • Comes with trailer
  • Hull in good shape
  • Needs mechanical
  • When she was in the water ‘went like a scared cat!’

Located in Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index