Category Archives: WORK BOATS


File No.W2302

(2)1991 30′ x 11.5′ Munson Dive/Work Boats

  •  SOLD!
  • All aluminum construction
  • Twin7.4 liter Crusaders with straight drives
  • Navigation equipment: GPS, Radar, VHF
  • Dive Door
  • Wide walk arounds
  • Comfortable cabin
  • Enclosed head
  • Floodlights, tow post

Located in New York State


Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index







File No.W2168

30’x 9’ x 3.5’ Steel Open Work Boat

  •  Built in 1954
  •  Registered in USA
  • Powered by Detroit Diesel 4-53 diesel engine – rad cooled
  • C/wBorg Warner Velvet Drive 2.9:1 transmission
  •  Equipped with 22” propeller
  • The steering console is fitted with dual lever engine controls
  • Manualsteering with single blade gudgeon/pintle mounted rudder
  •  Fittedwith a double tow bit aft and a single bit forward

 Located in Wisconsin

 Price$12,600 US

This vessel is in general satisfactory condition with shell plating with few scattered local indentations to maximum of ¾” with some minor to moderate external pitting primarily along the port bilge strake.

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index















File No. W2045

New 18’ x  7’6” Airboat

  • Built in Canada
  • Engine– 355 cubic inch Chevrolet motor 385 hp
  • Drive Unit – Air Boat Drive CH – 2
  •  Header– Stainless Steel
  • Gear Reduction – Franklin 2:1
  • Propeller– Whirlwind AB 300 or 400 Composite
  •  Rudder – Dual fiberglass
  •  Cage – Steel construction with baked enamel finish
  •  Navigation lighting – Directional: 4 x 200,000 Candle Power Lighting System
  •  Nav: Nightime running lights (Red, Green & White)
  •  Interior Heating System – 50,000 BTU, dual stage fan – defrost and  cockpit
  • Fuel Tank – 28 gallons/112 litres
  • Hull – Fiberglass, 6 stringers, recessed polymer panels sides and bottom
  •  Seating – 2 front bucket seats and 4 person rear bench
  •  Canopy – Completely enclosed, winter grade canvas with clear vinyl sides
  •  Custom Built Trailer – Torsion Bar, 3,500 lb axles, 2” ball
  •  Optional Equipment – Block Heater, Intercom System, Remote Spot Light
  •  Special design interior for Search and Rescue operations
  •  Ice Brake, Compass, GPS System, VHF Radido

Located in Ontario. Canada

Price on Request

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index



File No. W2097

New 4’ x 6’ Aluminum Pilothouse

Fully enclosed
Glass and windshield wiper are just a couple of features left to install
Built in Ontario
Price of basic aluminum pilothouse $7,250 CDN

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.  Phone 519-583-1636
Return to index




File No.W2277

1991 17.67m x 4.48m x 1,48m Wood Covered with Fiberglass 10 Ton Cargo/Passenger/WorkBoat

Built in Maldives
Certified for 15passengers and 10 ton cargo
Last survey: May14, 2013
Gross tonnage:9.2 tons
Volvo Penta TAMD41 – 175 hp – year 1991
Twin Disc transmission
Shaft size:2″
Propeller size:24″
Cruising speed:9 knots
Fuel capacity:400 litres
Fresh watercapacity: 300 litres
Electronics: VHFRadio, GPS, Compass
Located in Maldives
Price: $141,750 USD

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us forfurther information
Scruton Marine Inc.    Phone519-583-1636  

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information
Scruton Marine Inc.    Phone 519-583-1636
Return to index



Here are some of the work boats we currently have listed for sale.
Use your mouse to click on the file number to see more details and in most cases additional  photos.

Head on over to the Subscribe Page  if you would like updates on New or Updates on Listings in this section.
Subscribe Now

(listed according to size)
118' x 44' x 7'1994 Trash Skimmer
Built to ABS Maltese A1 Standards
Could easily be converted to oil skimmer
Twin Cummins KTA 28 - 750 hp turning
Schottel drives
(2) Cummins 200kw gensets
70kw standby generator
Deck has 2 skimming or moon pools
Hydraulic telescoping Appleton crane
Rated at 44,000 lbs at all radiuses
New York StateSOLD!
W2403110' 110' Offshore Supply Vessel and multi year gov contract, selling the businessEast Coast USA$350,000 USD
T241098.7' x 22' x 9'1939 Steel Tug for Sale, Powered by EMD 12-567, 5 hours on rebuild, Accommodations for 4, this boat is ready to go!Ontario$250,000 USD
W238686'10" x 36' x 9'2"2011 Multicat Eurocarier 2611, 2 cranes, 3 winches, licensed for 12, bowthruster, 33tonne bollard pull, powered by 2 CAT C32 enginesCaribbean€ 4.9 million
80' x 20'1954/1995 Russel Brothers 1000 hp Tug, Detroit 12 149 TI, 15,600 litre fuel capacity, bunks for 4Ontario
Southern Ontario
W231373' x 17 x 10'1969 Aluminum Work Boat
Built by Halter Boats, New Orleans, LA
(2) Detroit Diesel 6 cyl 60 Series
- total 1050 hp, year 2008
- 800 hours since overhaul in 2011
(2) Twin Disc MG 514A 2.5:1 gears
Lima 75KW, 208V genset
Palfinger K 4100 deck crane
Accommodations for 2
See listing for available dive equipment
Ontario$150,000 USD
T242570'11 x 19'6 x 9'1954/2010 Ex-Army ST Harbor Tug, 850 hp Caterpillar, Twin Disc MG540 4:1Massachusetts$199,000 USD
New Price!
62'6 x 19'8 x 4'5
1980 Steel EX CCGS Buoy Tender
GRT: 79.78 tons
NRT: 33.34 tons
Engines: (2) NT855-M2 - 189 KW each
Transmissions: (2) Twin Disc 4G5114SC
Generators: (2) CAT 3304 = 53KW
Hiab Sea Crane 200- lift cap. 9,100 kg
Manual crane arm boom - lift cap. 900 kg
Metalcraft 4.2m workboat - 50 hp outboard
Accommodations for 5
Galley, mess and lavatory facilities
Ontario$499,000 CDN
58' x 14'8 x 4'10
1991 Wood Covered with Fiberglass
10 Ton Cargo/Passenger/Work Boat
Built in Maldives
Gross tonnage: 9.2 tons
Certified for 15 passengers
Certified for 10 ton cargo
Volvo Penta TAMD41 - 175 hp
Twin Disc transmission
Cruising speed: 9 knots
Maldives$141,750 USD
50’ x 15.5’ x 5.5’1961 Steel Tanker (Refueling vessel)
Double bottom
Canada Coast Guard certified tanker
Capacity: 23,000 litres in 4 compartments
Volvo MD100B – 155 hp
Capital transmission
Always in fresh water, Last survey 2019
Ontario$84,000 CDN
new price!
W239250' x 14' x 3'1987 Steel Work Boat/Cargo Tug for sale, cargo capacity 38,700 lbs, powered by 2 6-71 Detroits @ 220hp each, needs steel work, haulout and paintSouth Carolina$25,000 USD
T241750' x 14' x 21971 Ex Navy Twin Screw Cargo Tug, 6-71 Detroits - both water damaged, Twin Disc gears, Cargo hold 12' x 24'Texas$35,000 USD
45' X 14.5'1982 Gladding Hearn Built Crew Boat
Steel hull/ aluminum cabin
Twin QSM11 535hp Diesel Engines (yr 2000)
Cruising speed: 20 to 26 knots
12KW generator
Can carry up to 15 persons
Boat has always been in fresh water
New York State$140,000 USD

44' x 10.5'2018 Aluminum Crew/Work Boat, 18" draft, Powered by 2 Yamaha F250 220 hours, COI for 24 passengers, truckable, etc.LouisianaSOLD!
Another can be built
T241442' x 11'9Russel Brothers Work Tug for sale, 12.34 GRT, 12-71 Detroit Diesel w/100 hrs on rebuild, MG512 3:1 gearOntario$180,000 CDN
T242741.9' x 12.4' x 5'6 draft1966 Twin Screw Model Bow Tug, Powered by 2 Detroit Diesel 6-71 keel-cooled engines, push knee, fendering and winchesNew York State
(Niagara River area)
41' x 13'6"1978 UTB
Twin Cummins 300 hp
Fire pump
350 gallon fuel capacity
New York StateSOLD!
40' x 11'1959 Twin Screw Work Boat, Twin Perkins T6.364, 165 hp each, cruises @ 8 knots, pushes a loaded barge @ 5 knotsOntario
Southern Ontario
T241940' x 10.5'1945 Russel Brothers Ville Class Tug, Powered by Cummins w/ a Twin Disc 3:1 transmissionMichigan$37,000 USD
New Price!
39' x 12'71948 Steel Paasch Trapnetter, 120hp Ford Lehman, electronics, GRT: 14OhioSOLD!
LC214236'5 x 12'22021 Aluminum Landing Craft, w/ 2 x 225hp Yamaha (200 hours), Nearly new condition!QuebecUNAVAILABLE UNTIL NOV 2023
FV216336' x 10' x 2' draft1982 Steel Trapnet Vessel, 135 hp Perkins Diesel, fuel capacity 400 litresOntario
(Southern Ontario)
$22,000 CDN
35' x 10'2019 Landing craft, aluminum pilot house and sole, 250hp Evinrude 350 hours, trailer availableOntario
(Port Dover area)
W242234' x 10'5 x 3' draft1989 Aluminum SeaArk Work/Crew/Dive Boat for SaleNew York State$40,000 USD
Reasonable Offers Considered
W242133' x 12'New Build Heavy Aluminum Work Boats and Landing BargesOntario
(Georgian Bay area)
$300,000 CDN
30' x 11.5'
(2) 1991 Munson Dive/ Work Boats
All aluminum construction
Twin 7.4 liter Crusaders with straight drives
Diver Door
Wide walk arounds
Comfortable cabin
Enclosed head
Flood lights, tow post
New York StateSOLD!
LC214330' x 10'31995 Steel Landing Craft, 6 cyl Diesel w/Azipod, 7'1" bow gate door, 18' of clear deckOntario
(Port Dover)
30' x 10' x 3'1988 Henley Aluminum Landing Craft, Powered by Twin Volvo Diesels, Cruises at 28mphOntario
(Georgian Bay Area)
30’ x 9’ x 3.5’1954 Steel Open Work Boat
Detroit Diesel 4-53/ Borg Warner 3:1 gear
22” propeller
Wisconsin$12,600 CDN
29' x 10.5' x 3.5' 1969 Lafco Aluminum Crew Boat/Work Boat, Perkins 265hp, Cruises @ 18 knotsNew York StateSOLD!
28' X 11.6"1989 Twin Screw Monark Work/Crew Boat, Powered by 2 250hp Mercruiser dieselsNew York StateSOLD!
W242528' x 8'6 x 3' draft1988 Aluminum Work/Crew Boat, Twin Mercruiser 5.7 MPI, Bravo 2 outdrives, dual stationsNew York State$35,000 USD
New Listing!
W241627' x 11'1992 Henley Aluminum Work Boat w/tandem galvanized trailer, 350 Chevy and Volvo outdrive, ready to go!Ontario
(Port Dover)
26' x 11'Aluminum Crew Boat, de-rigged, with fendering and push kneesOntario
(Port Dover)
W237026' x 10.5'1980 Aluminum Work Boat, Volvo Penta Twin D3-160A EVC-B (2005), 160 hp, 320 hrs, Sleeps 2Iqaluit Nunavut$25,000 CDN
T242625'11 x 14 x 4'62022 Twin Screw Truckable Tug, Twin Cummins w/ Twin Disc gears, push knees and winchesMichigan$295,000 USD
New Price!
New Photos!
25' x 9'6"1989 25' x 9'6" Sea Ark FAST Response Work Boat DE-RIGGED
Full fendering all the way around
Tow post, side dive door, spotlight, VHF, radar
Fuel capacity 120 gallons
3' draft with motors down
New York StateSOLD!
W238324'6" x 9'New 24'6" x 9' Steel Work Boat with Wheelhouse, 15' of deck ahead of wheelhouse, 4" pipe side cap, (2) 4" spud pockets aft, built to orderOntario
Port Dover
T242224' x 8'1952 Steel Tug, Detroit 6-71, nice rugged little work boatOntario
(Eastern Ontario)
$40,000 CDN
New Price!
24' x 8'Steel Work Boat with tandem trailer and 175hp YamahaNear Port Dover, OntarioSOLD!
Ask us about similar boats!!
B233823'6 x 8' x 30"New Steel Work Barge, double rake, split pipe bump rail, removable push knees, 3' x 8' x 6'8 wheelhouse hinges forward for lower trucking, 6 cleats, Built to orderOntario
(Port Dover)
23' x 9'62020 Pontoon Work Barge w/ Crane & Flatbed Tandem Trailer, steel pontoons, aluminum deck, GM V6 inboard/outboardOntario
(near Port Dover)
B2356 23' x 8'6 x 34" New Steel Work Boat for Sale, push knees, console, spud pockets. Capacity 16,000 lbs. Built to orderOntario
(Port Dover area)
W238721' x 8'1985 Aluminum Work Boat, REQUIRES A NEW ENGINE (was powered by Volvo Penta AD41P-A, 200hp
Comes with Trailer
W238821' x 8'Aluminum Dory/Work Boat - New Build, 3/16 floor with a 3″ sub floor and 3/16 checker plate, 3/16 walls with a 10″ wide wash board
21' x 7'6"1998 Aluminum Work Boat w/ Trailer, Inboard/Outboard 4 cyl Mercruiser engine 130hp, Mercruiser outdrivePort Dover, OntarioSOLD!
W236720' x 8'New Steel Push Boat, c/w console, push knees, motor bracket, 1 coat primer, light draft 8", Built to orderOntarioCALL FOR CURRENT PRICING
W241920' x 6.5'2022 Aluminum Work Boat, 3/16" construction, self-bailing floorNear Port Dover, Ontario$15,000 CDN
New Listing!
W238519'6 x 6'6Aluminum Work Boat, 3/16" sides, 1/8" sidesNear Port Dover, Ontario$10,000 CDN
New Listing!
19' x 9'8Fiberglass Sea Truck, 6' bow gate door with manual winch, 4 cyl Merc, comes w/trombone trailerOntario
(Near Belleville)
W242319' x 8'61995 SeaArk, 18" draft, Mercruiser 5.0 MPINew York State$30,000 USD
New Listing!
W242419' x 8'62001 SeaArk, 18" draft, 225 hp Mercury Optimax, 4 picking eyesNew York State$30,000 USD
New Listing!
W236619' x 7'6" x 32"New Steel Work Boat,
10 gauge steel, built to order
18' 4"x 94"Aluminum Tiller Boats
Custom built
Weight 946 lbs
30" sides
Cargo capacity listed 1400 lbs
Have wide gunnels and are self bailing
Checker-plate water-tight decks
Seating can be customized
18' x 8'1996 Aluminum Landau Flat Bottom Workboat w/40hp Mariner & TrailerIllinoisSOLD!
17'Tilbury Workboat, blasted w/2 coats of primer, cleats and push rubber installedOntario
Port Dover
W2391W239117' x 5'6 x 32"2020 Steel Work Boat, 12 ga hull, 10 ga transom, 2" x 3" rub rail, 2 1/2" pipe perimeter cap, suitable for 70hp outboardOntario
(Port Dover)
$8,000 CDN
W241716'6 x 6'2022 Steel Work Boat, 12 ga bottom, 14 ga sides, epoxiedOntario
(Port Dover)
$6,500 CDN
$9,000 CDN with 30hp Yamaha 2 stroke
16' x 5'Steel Workboat
No motor
(near Port Dover)
4’ x 6’Fully enclosed aluminum pilothouse
Basic structure only
Ontario$7,250 CDN
SP223711'6" long x 80" w x 80" hSteel wheelhouse
11'6" long x 80" w x 80" h
Ontario$7500 CDN or best offer
SP223711'6" long x 80" w x 80" hSteel wheelhouse
11'6" long x 80" w x 80" h
Ontario$7500 CDN or best offer

Please contact us for further information
Scruton Marine Inc.   Phone 519-583-1636  

Return to index