W2425
1988 28′ x 8’6 Aluminum Work/Crew Boat
- SOLD!
- Runs and drives
- 3′ draft
- Twin Mercruiser 5.7 MPI
- Bravo 2 outdrives
- Electronic shifters
- Dual steering stations (flybridge and cabin)
- Push knee
- Needs bottom paint
- Cruises at 30 mph
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
1992 28′ x 10.3′ MetalCraft Aluminum Crew/Dive/Work Boat w/Tri-Axle Aluminum Trailer
- SOLD! YOU JUST MISSED HER!!
- She’s got tons of room and is ready for work or play!
- GRT: 9.89, NRT: 7.59
- Twin Volvo Diesels, AD31B, 130hp each, approx 1,000 hours
- Cruises at 20 – 25 knots
- Electronics: 2 VHF radios, GPS, sonar
- Accommodations: toilet and berth down forward
- Comes with tri-axle aluminum trailer
Located in Northern Ontario on Lake Huron
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2427
1974 31’6 x 8’5 Aluminum Work/Crew Boat & Trailer
- SOLD!
- This rugged workboat has been re-powered and she’s ready to get the job done!
- 18″ draft
- GRT:5.71
- Powered by 2 Mercury MerCruiser Quicksilver 350 MPI, year: 2019
- Total hp: 520
- Berkley jet drives: 2019
- New wiring: 2019
- Fuel capacity 400 litres
- 12 passenger
- Viking fire system
- Electronics: VHF, Garmin 721xs GPS
- 3 axle trailer included
- Location: Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
2021 48′ x13′ Truckable Steel Work Boat For Sale – Powered by Volvo
- Price: $195,000 CDN
- She’s got great lines, loads of room, and she’s ready to get to work!
- Truckable – built so that wheelhouse splits below windows
- Draft is 4′
- GRT: 9.75, NRT: 7.33
- Powered by Volvo TAMD103-A, 350 hp, 2500 hours
- Keel cooled
- Gear is Tonanco 827, 3:1
- Cruises at 8 knots
- Fuel capacity is 800 gal
- Fuel consumption is 3 gph
- Prop is 4 blade 42″ x 30″, on a 3″ shaft
- Shell plate is 3/16″
- Built new in 2021: 13′ x 22′ back deck, bullworks, and wheelhouse
- Headroom in Wheelhouse is 6’2
- Electronics: radio, Raymarine GPS, Electronic Fiari compass,
- Hydraulic steering
- Other: spot light, deck lights, anchor is 100 lb Navy w/ 120′ of 3/4″ chain
- Windlass is Lemar 12V
- Safety: life rings, fire pump, flare kit
- 2 bilge pumps, fire pump
- Located in Northern Ontario (Georgian Bay)
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
E2781
Cummins NH-250-M Marine Engine (removed from tug Dec 2024)
- SOLD!
- Good Running Take Out
- Removed from 50′ tug in December 2024
- Located in Southern Ontario
Details re deemed to be correct but are not guaranteed and should be independently verified. .
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
T2435
1957 42′ x 12’6 Mathieson Built Tug For Sale – Powered by CAT
- Price: $160,000 CDN
- Built by Mathieson Welding Service, Goderich, Ontario
- GRT: 10, NRT:6.8
- Draft is 3’6″
- Powered by Caterpillar 3406, 450 hp
- Fuel capacity 500 gal
- Twin Disc gear
- Cruises at 6-7 knots
- Equipped with radio, radar, depth sounder, compass and hydraulic steering
- Located in Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
T2434
1951 42′ x 13′ Mathieson Built Tug For Sale – Powered by CAT
- Price: $160,000 CDN
- You just found the next work horse for your fleet!
- Built by Mathieson Welding Service, Goderich, Ontario
- GRT: 11.16, NRT:9.31
- Draft is 3’6″
- Powered by Caterpillar 3306
- Twin Disc gear
- Cruises at 6-7 knots
- Equipped with radio, radar, depth sounder, compass and hydraulic steering
- Located in Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
