Tag Archives: steel boat for sale

W2449

1995 30′ x 9′  Steel Work Boat For Sale -Powered by Detroit Diesel 

  • Price: $65,000 CDN
  • This handy little workboat was refurbished in 1995
  • Draft is 4′
  • Powered by Detroit Diesel 4-71, model RC 4031N, serial 4A142842
  • Gear is Twin Disc MG150, x8708
  • Prop is 23″ x 17″ RH, stainless, on 1.75″ shaft
  • Steering is sprocket/chain/shaft/pitman arm
  • Sealed keel cooling
  • Fuel capacity is 90 gal
  • Shell plate thickness 1/8″
  • Headroom in wheelhouse is 6’4, engine room 32″
  • Comes with custom shipping/storage cradle
  • Weighs approx 9 tons
  • Located in Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

      

W2450

1970 48′ x 16′ De Vries Lentsch Twin Screw Steel Work Boat Powered by Detroit Diesel 

  • Price: $65,000 CDN
  • Built by the iconic W. De Vries Lentsch Jr. company of Amsterdam
  • Draft is 4’3″
  • GRT: 30.39, NRT: 22.8
  • Powered by 2 Detroit Diesel 6-71
  • Gears are Twin Disc MG509 3:1
  • 2.5″ shafts with 4 blade props
  • In 2021 she received 4 new Cutlass bearings, shafts and props were dye tested – no cracking, props were balanced, and she got new rudder shafts, bearings and seals
  • Shell plate thickness  5mm
  • Fuel capacity total 6,580 litres (2540 litres port side, 2540 litres stbd, 1500 litres keel tank)
  • Fresh water capacity: 1,000 litres
  • Generators: 2 x Kohler, 28 EFOZD, 3 phase 120/208, 610 hours each
  • Electronics: 2 x VHF, GPS is Furuno GP37, Radars: Furuno enclosed 24″, Raymarine 48″ open color, Depth Sounder: 2 x Raymarine es 128 MFD, Compass: Ritchie Globemaster, Autopilot: Raymarine, Also Raymarine side scan, 1 kw depth sounder
  • Windlass is Maxwell HWC3500
  • Steering is Sea Star Hydraulic
  • Head is Dometic vacuum flush
  • Roof AC unit: Dometic with heat & Flagship Marine Chilled Water AC – 48,000 btu 3 phase – 3 x 16,000 btu chilled water fan coils with 2kw heat each
  • ***Dive equipment not included***
  • Located in Southern Ontario

Check out the video below

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.    Phone 519-583-1636
Return to index

      

P2454

P2454

1983 30′ x 9′ Welded Steel Motor Boat Project Boat

Price: $9,500 CDN or Best Offer

  • This project boat has nice lines and loads of potential!
  • 3′ Draft
  • Built by Kettle Creek Boat Works, Port Stanley, Ontario, Hull #1
  • Registered tonnage: 4.5 tons
  • Engine is Perkins (1983) 4.108 51 hp diesel
  • Condition of propulsion system: not run in 8 years
  • Stainless fuel tank estimated 80 – 90 gal capacity
  • Shell plating is 3/16″ with 1/8″ on cabin sides and top
  • 2″ x 3/16″ flat bar ribs on 24″ centers
  • 1″ x 3/16″ flat bar longitudinal hull frames at 16″ centers
  • 12″ x 6″  I-beam keel with bolted on lead ballast
  • Structure has minimal pitting, hull is solid, very little surface rust
  • Custom stands included
  • Located in Amherstburg, Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Services    Phone 519-583-1636
Return to index