2010 33′ x 11′ Kanter Transporter Aluminum Landing Craft
- SOLD!
- This is not your average landing craft!
- ISO Category C commercial grade build, meets or exceeds Transport Canada, ISO cat C, and ABYC stds/requirements
- Heavy hull plating, robust transverse and longitudinal framing plus watertight compartments below the watertight quick draining deck
- Powered by 2 Evinrude G2 250 hp motors; Port has under 10 hours since rebuild, Starboard has under 500 hours
- Max hp per designer/architect is 600 hp
- Props are 4 blade stainless, new, common rotation
- Cruises at 25mph, Max speed is 45 mph
- Fuel capacity 2 x 50 gal aluminum
- Fuel consumption average 1.8 – 2.0 mpg
- Draft is about 1.5′ aft
- 1/4″ shell plate thickness, stiffened 1/4″ deck
- Electronics: Icom Marine VHF, Garmin GPS, Ritchie compass/chartplotter,
- Hydraulic steering – Sea Star DPS (Digital Power Steering)
- Weight: around 9,600 lbs
- Deck load capacity: rated for 6,000 lbs, has carried vehicles, trailers, ATV, skid steers, compact excavators, loader b/h, deck loaded materials
- Dickenson propane marine heater, fresh air fed
- Extras: tow post, Corbin shockwave helm and passenger seats
- Bilge pumps: 1
- Comes with heavy duty removable ramps, 5,000 lb each, 5,000 kg tow post, 2 rescue props, 1 spare 250hp Evinrude motor that needs repairing
- Original owner
- Located in Eastern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
B2395
1958 43’9 x 24′ x 8′ 2-Section Steel Portable Dump Scow w/ 50 Cubic Yd Capacity, Hydraulic Scissor Dump
- ***DEAL PENDING***
- 2 Sections 43’9 x 12′ x 8′ approx
- Bottoms replaced during 1980’s, hopper replaced around 2010
- Hopper capacity is 50 cubic yards
- Motorized hydraulic scissor dump and close
- GRT: 29.36
- Draft is 4′ max loaded
- Shell plate thickness is 1/4″
- Shipping weight per section 15 tons approx
- Hydraulic scissor dump system is powered by Honda GX160
- Pump is Hydro-Tek 04cc/rev G204B02
- Last survey 2011
- Reported to be in Good/Excellent Condition
- Location: Southern Ontario, Canada
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
W2425
1988 28′ x 8’6 Aluminum Work/Crew Boat
- SOLD!
- Runs and drives
- 3′ draft
- Twin Mercruiser 5.7 MPI
- Bravo 2 outdrives
- Electronic shifters
- Dual steering stations (flybridge and cabin)
- Push knee
- Needs bottom paint
- Cruises at 30 mph
- Location: New York State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
1992 28′ x 10.3′ MetalCraft Aluminum Crew/Dive/Work Boat w/Tri-Axle Aluminum Trailer
- SOLD! YOU JUST MISSED HER!!
- She’s got tons of room and is ready for work or play!
- GRT: 9.89, NRT: 7.59
- Twin Volvo Diesels, AD31B, 130hp each, approx 1,000 hours
- Cruises at 20 – 25 knots
- Electronics: 2 VHF radios, GPS, sonar
- Accommodations: toilet and berth down forward
- Comes with tri-axle aluminum trailer
Located in Northern Ontario on Lake Huron
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
PR2231
32” x 28”, LH, 4-blade, Nibral, Michigan Hy Torq Propeller
- Price: $1,350 CDN
- Location: Port Dover, Ontario
Details are deemed to be correct but not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com Scruton Marine Inc. Phone 519-583-1636
Return to Listings
