Category Archives: BARGES

BARGES, BARGES & TUGS FOR CHARTER, FEATURED LISTINGS

B2389

B2389

2017 Aluminum Sectional Barge – 37’11 x 16’6 x 3’8

  • SOLD!
  • This 2 section barge is built to the highest spec, is stackable, truckable and ready for your next project.
  • Accessories on deck are easily removed, making the sections stackable
  • Made in the USA
  • Shell plate thickness: 1/4″ hull, 3/8″ deck 
  • Draws 18″ empty
  • Each section has:
    • 4 hatches – 2 on deck, 2 below water line
    • 1 bulkhead midship
    • 6 lifting lugs per barge, lifting lugs run all the way through the hull
    • heavy duty framing
    • runners running the length of each section
    • tow points
    • rubber fendering on front rake
  • Stainless pins are 1 1/2″ diameter
  • Sections pin at top and bottom for extra strength in a variety of sea conditions
  • Weight of each section is 12,000 lbs
  • Capacity: at least 10 tons
  • Location: Eastern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified. 

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636
Return to index

BARGES, FEATURED LISTINGS, MARINE, MISCELLANEOUS, WORK BOATS

B2385

B2385

2013 40′ x 14′  Steel Spud Barge w/Crane (Sides Fold for Trucking!)

  • SOLD!
  • The fold-up sides on this handy crane barge make it truckable 
  • Shell plate thickness 1/4″
  • Sides are 2.5′ high
  • Spuds are 6″ x 6″, 20′ long
  • Powered by 2 Mercury 150hp outboards (2013)
  • 1 hatch, 3 bulkheads
  • Gas powered hydraulic power pack powers knuckle boom crane, spuds and raise and lower the outboards
  • Crane has 3/8″ cable and at 37′ will pick 4,000 lb
  • Hydraulic steering
  • Location: Western Michigan

Details are deemed to be correct but are not guaranteed and should be independently verified. 

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636
Return to index

BARGES, FEATURED LISTINGS, MARINE, MISCELLANEOUS, WORK BOATS

B2383

B2383

2018 50′ x 12′ x 5′  Steel Barge w/ Ramp and Spuds

  • SOLD!
  • Shell plate thickness 1/4″
  • Capacity approx 70,000 lbs
  • 2 ramps 12′ x 2′
  • 4 spuds
  • 2 bulkheads – 3 compartments 
  • 3 hatches
  • Location: Eastern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified. 

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636
Return to index