W2392
1987 50′ x 14′ x 3′ Steel Work Boat/Cargo Tug
-
- ***DEAL PENDING***
- New Price: $25,000 USD
- Powered by 2 6-71 Detroits
- Cargo hold 12′ x 28′, capacity 38,700 lbs
- Fuel capacity: 600 gal
- 2 manual deck winches
- Vessel needs: a new deck in cargo hold, haul out and fresh bottom paint
- Location: South Carolina
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
T2410
1939 98’7 x 22′ x 9′ 1200 hp Tug
- Price: $250,000 USD
- GRT: 132, NRT 49
- Built in Port Arthur, Texas by Gulfport Boiler & Welding
- Powered by EMD 12-567, 1200 hp, 5 hours since rebuild
- Fuel capacity: 60,000 litres
- Fuel consumption: 20 gph
- Fresh water capacity: 20,000 litres
- Holding tank capacity: 2,000 litres
- Generator: 3-71 Detroit
- Electronics: radio, GPS, radar, direction finder, compass, joy stick steering
- 4 1/2″ shaft, new 96″ stainless prop
- Bilge pumps: 3 electric
- Accommodations: sleeps 4, galley, 1 head
- Oil furnace
- Ready to go
- Located: Northern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
S2044
1980 19.05m x 6m x 1.35m Steel Ex CCG Buoy Tender
Built by Canadian Dredge & Dock Co.,Kingston, Ontario
Class Voyage: Inland Waters II
Taken out of service in 2010
- Length (LOA): 19.05m
- Breadth: 6m
- Depth (moulded): 1.71m
- Draft: 1.35m
- GRT: 79.78 tons
- NRT: 33.34 tons
- Freeboard: 1m
- Cruising range: 2000 nautical miles
- Endurance: 10 days
- Cruising speed: 10 knots
- Fuel capacity: 20 m3
- Fresh water capacity: 6.2 m3
- Fuel Consumption: 0.3 m3 per day
Navigation/Communication Equipment:
- 1 x AutoPilot – ComNav Marine 2001
- 1 x Digital Gyro Navigation 24V DC
- 1 x Compass Ritchie Binnacle 6″
- 1 x Compass Repeater, Anschutz Repeater
- 1 x Echo Sounder Skipper GDS101
- Sperry Marine Bridge Master E Radar Unit
- AIS: Saab AIS GPS/DGPS Units
- Sailor VHF/Radio Telephone/FM Units
- Westinghouse satelite telephone units
- Avo Intercom with auto-hailing to all compartments and decks
- Other Radio: United Security Products, security system wit auto-voice/pager dialing
Propulsion and Steering:
- 2 x Cummins NT855 Marine Engines – 189 KW each
- 2 xTwin Disc Transmissions – Model 4G5114SC
- Wagner Model 250-1300 hydraulic power steering controls
- Wagner Model 250-1300 steering gear
Generators:
- 2 xCAT 304 gen sets – 63KW, 240 VAC, 60hz
Deck/ Towing Equipment:
- 1 xHIAB Sea Crane 200 – lift capacity: 9,100 kg
- 1 xManual crane arm boom with Lewmar 40 2 speed electric winch – lift capacity: 900 kg
Auxillary Systems:
- Fuel System, Lube Oil System, Air Compressor, Cooling System
- Bilge System, Firefighting System, Sanitary System, Hydraulic System
- Domestic Water System, Accommodation HVAC System
Safety Equipment:
- Fixed CO@ fire fighting system
- Portable dry chemical fire extinguishers
- Breathing apparatus equipment
- Emergency immersion suits
Living Spaces / Accommodations
- 3 xsmall staterooms with sleeping accommodations for five persons
- Galley, mess and lavatory facilities
Located in Ontario, Canada
Price: $499,000 CDN
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
E2733

Single Cylinder, Simple Expansion, Vertical, Reversing Marine Steam Engine
- SOLD!
Made by J. McCrae, Lindsay, Ontario
5″bore x 4″ stroke
Located in Southern Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified. .
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
E2738
12V92 Detroit Diesel
- New Price: $3,500 CDN
- Core engine was driving a generator
- 305 hours on meter
- 700 hp @ 2100 rpm
- Heat exchanger cooled
- Located in: Southern Ontario (Port Dover)
Details are deemed to be correct but are not guaranteed and should be independently verified. .
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
CR2092
Case CX240 LR Long Reach Excavator
- Price: $125,000 CDN
- 2600 hours
- w/ all new Trimble Instrumentation for a GPS system
- Located in Belleville, Ontario
Details are deemed to be correct but are not guaranteed and should be independently verified. Call us at 519-583-1636 for more info!
Return to Listings
File No.SP2226
Set of D2 Brass Kahlenberg Horns
- Price: $1,100 USD
- Removed from a NY commercial fishing vessel
- 20+ years old
- Located in NY State
Details are deemed to be correct but are not guaranteed and should be independently verified.
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index
File No. D2120
Mudcat MC915 Auger Dredge
Construction material – Steel
- Length : 38’ 11″
- Width : 9′ 0″
- Height : O.A.8’8′
- Weight : 21,000 lbs. & Dry
- Draft : 21″
- Floating Clearance : 6’9″
- Fuel Capacity : 360 gallons
- Pontoons : Two 36″ x 32″ x 330″
10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled
- Auger: Diameter 13-5/8″
- Pitch : 11″
- Flighting: 3/8″
- Speed: Up to 100 RPM
- Cutter Knives: 45 Detachable Heat-Treated Blades
- Cutter Bars: 36 Detachable Heat-Treated Blades
- Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
- 19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
- Operating: Depth-15′ maximum
- Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
- Clutch—Manual: 14″ Dia. Disc & Pressure Plate
- Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
- Centrifugal Closed Impeller
- Impeller Diameter: 19-1/2″
- Suction Diameter: 8″
- Discharge Diameter: 8″
- Shaft Diameter: 2-7/8″
- Capacity: 2000 GPM @ 1160 RPM against 180′ Head
- Material Removal: To 120 Cu. yds./hr.
- Capacity: 75 GPM @ 2800 RPM
- Pressure: 80 PSI
Dual Pumps
- Capacity Total: 30.5 GPM @ 1800 RPM
- Reservoir : 47 Gallon
- Circuit One: Auger Drive
- Circuit Two: Boom, Mud Shield and Winch
Relief Valve Setting:
- Auger : 3000 PSI
- Others: 1500 PSI
Treble Sheave Hydraulic Winch
- Traverse Speed: 50 FPM Maximum Forward & Reverse
- Average Cutting Speed: 8 to 12 FPM
- Voltage: 12V
- Alt. Output: 65 Ampere
- Batteries: 12V, 205 Ampere Hour, Parallel Wired
- Circuits: 2 Wire System Full Ground
Polyurethane finish coat on corrosion inhibitive epoxy primer
- Standard Colors: Green and White
Located in Ontario, Canada
Price $157,500 CDN
File No. D2119
2011 Mudcat MC-910 Aluminum ENV Suction Dredge
Principal Dimensions and Characteristics
- Custom Built in 2011
- Length Over All: 11.62 m 38.11 feet
- Width: 2.74 m 9 feet
- Height Over All: 2.68 m 8.8 feet
- Draft: 533.4 mm 21 inches
- Floating Clearance: 1.80 m 5.9 feet
- Fuel Capacity: 1,325 liters 350 gallons
Floatation
- Pontoons – (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
- .25 thick marine grade aluminum formed with Internal Bulkheads and Stiffeners:
Cutter Assembly
- Auger: Diameter: 4.15 m 13.625 feet
- Pitch: 279.4 mm 11 inches
- Flighting: 9.53 mm 0.375 inches
- Speed: Up to 100 RPM
- Cutter Knives: 45 Detachable Heat-Treated Blades
- Cutter Bars: 36 Detachable heat-Treated Blades
- Auger Torque: 18,000 in. lbs.
- Rotates to Cut Slope up to 45 degrees
Mud Shield
- Stainless steel Hydraulic Adjustable: 482.6 x 482.6 mm 19 x 19 inches
Boom
- Stainless steel tubular steel construction extendable to 38 with additional floatation added
Working Capacity
- Cut (width x max. depth): 2.74 m x 457.2 mm 9 feet x 18 inches
- Maximum Digging Depth: 3.05 m 10 feet
Main Engine
- Make/Model: Detroit Diesel / 6-71 RC
- Power @ 1,800 RPM 130 kW 225 hp
Drive
- Clutch – Manual, 14 inch (355.6 mm) Diameter Disc & Pressure Plate
- Reduction – Gear Ratio: 1.55/1 – Drive Coupling Flex Type
Pump
- Type: Centrifugal Closed Impeller
- Impeller Diameter: 495.3 mm 19.5 inches
- Suction Diameter: 203.2 mm 8 inches
- Discharge Diameter: 152.4 mm 6 inches
- Shaft Diameter: 73.03 mm 2.875 inches
- Capacity: 2,000 GPM @ 1,160 RPM against 180′ Head
- Material Removal (up to): 91.75 cubic meters/hr 120 cubic Yards/hr
Service
- Capacity: 75 GPM @ 1,800 RPM
- Water Pump Pressure: 80 PSI
- Hydraulic System Dual Pumps Capacity Total: 30.5 GPM @ 1,800 RPM
- Reservoir: 214 liters 47 gallons
- Circuit One: Auger Drive
- Circuit Two: Boom, Mud Shield and Winch
Relief Valve Setting
- Auger: 3,000 PSI
- Others: 1,800 PSI
Propulsion
- Treble Sheave Hydraulic Winch
- Traverse Speed – 50 FPM Maximum FWD & REV.
- Average Cutting Speed – 8 to 12 FPM
- Electrical System Voltage
- Electrical System Voltage: 12 V
- Alternator Output: 65 Amps
- Batteries: 12 V, 205 Amps/hr, Parallel Wires
- Average Cutting Speed: 8 to 12 FPM
Finish
Color
Located in Southern Ontario, Canada
Price: $315,000 CDN
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
FV2158
1985 60′ x 20′ x 6′ Great Lakes Commercial Fishing Vessel
Price: SOLD!
- Gross Tons: 68.09, Net Tons: 57.6
- Powered by Volvo TMD-100 (new injectors 2018)
- Twin Disc Gear 3:1
- Fuel consumption 4 gph
- 38 x 28 4 blade wheel, shaft 3.5″ stainless
- Palfinger crane with winch, 24′ reach 1600 lb capacity
- Hiab crane 32′ reach 2.5 ton capacity
- 4-man Ovatek life raft
- Hydraulic pulling machine
- 3″ hydraulic pump
- 145,000 BTU oil furnace
- head with shower
- 2 – 900 gal fuel tanks
- 1 – 200 gal water tank
- Electronics: 2 radars, 2 GPS, depth sounder
- Hull painted in 2018
- 2 bulk heads
- Bilge pumps: 2 electric, 2 hydraulic
- 20 kW genset is a 4 cyl Perkins
- Located in Southern Ontario
Details are deemed to be correct but are not guaranteed and should be individually verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings