Tag Archives: project boat

W2443

Price: $98,000 USD
This boat needs some work with the following known issues:
- The starboard shaft has been rung and needs to be repaired
- The hull pate near the port keel cooler is thin and needs to be doubled or replaced
Built in Houma, LA
GRT: 98, NRT:66
Draft: 6.7′
Shell Plate Thickness: .3775″
Powered by twin Detroit Diesel 16V-71, 635 horsepower
Twin Disc gears 4:1
Cruises at 12 knots
60″ Stainless steel 4-blade props on 5.5″ stainless shafts
(2) 40kw gensets 3-71 Detroits
Electronics: radio, plotter, radar, compass
Electric hydraulic steering
Fuel capacity: 18,000 gallons
Fuel consumption: 30-35 gph per pair at 2,000 rpm
Fire pump is 4-53 Detroit
More photos to come
Located in South Carolina

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index

SOLD!
Though her completion was cut short, this beauty is so close to being ready to go! Some elbow grease and your vision to customize the interior is all she needs to be loved for years to come.
The Peregrine’s topsides have been sanded and primed and paint is available for the final coat. The bottom has been sanded and primed and is ready for antifouling. The deck and house have been sanded and the deck is primed. Deck tread has been laid out, cut and is ready to install
27’3″ x 9’8″ with a 5′ draft
Welded aluminum racer/cruiser style
3/16″ hull, 1/8″ deck & house, 1/4″ keel
16hp Beta Marine B16 diesel engine (2019), professionally installed
Fuel capacity 100 gal (approx)
New electrical panel and LED lighting
New Levaq head and holding tanks for grey water and fuel (diesel)
New dead lights on cabin top
New quarter berth port light
Deck hardware including winches, handrails, 6 part mainsheet, traveler and wheel are removed to allow for painting
Stainless steel Bimini frame has been fabricated but will need new canvas prior to installation. Cushions are included.
Dual axle steel trailer included
Cat rig aluminum spars and Dacron sails, mild (stainless) wire rigging
40 gal hot water heater, 25 gal water tank
Holding tank capacity: 20 gal (approx)
Headroom: 6′
Shaft size: 1″
Weight: 5,000 lbs
Location: Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636 Fax 519-583-2189
Return to index

SOLD! YOU JUST MISSED IT!!
Refurbishing this vessel was cut short and she’s ready for re-power and the custom interior you dream up!
35’8″ x 11’8″ with a 4’9″ draft
1/4″ shell plating
Welded steel, sloop rigged cruiser with a full keel and hard top
Spars and quad-axle steel trailer included
Headroom: 6′
Shaft size: 1″
Prop: bronze, 3 blade
No engine – ready for repower
Accommodations: 1 double v-berth, 2 single bunks in salon
Steering: single wheel, pedestal
GRT: 12.79, NRT: 12.17
Location: Southern Ontario

Details are deemed to be correct but are not guaranteed and should be independently verified.

Please contact us for further information sms@scrutonmarine.com
Scruton Marine Services Phone 519-583-1636 Fax 519-583-2189
Return to index

FV2160

T2393