Tag Archives: used suction dredge for sale

D2138

D2138

2010 Portable Suction Dredge

  • Price: $147,000 CDN
  • Width: 8’6
  • Length: 26, Cutter Head 18′
  • Draft: 20″
  • 8″ Suction, 6″ Discharge
  • Both sides can discharge or can be discharged out stern valves on discharge lines
  • Digging depth approx 8′
  • Articulating cutter head – approx 6′ swing
  • Powered by a 4-53 GM
  • Located in Southern Ontario (Lake Erie area)

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information   sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636   

Return to Listings

D2137

D2137

10″ Suction Dredge

Length: 11.37 m or 37 feet

Width: 2.84 m or 9 feet

Height: 3.14 m or 10 feet

Weight: 17,000 lbs. or 7,711 Kg

Main Engine Make / Model: Cummins Diesel Model 5BTA 5.9 Power @ 2,500 rpm 129.75 kw 175 hp cylinders 6

Fuel Capacity: 175 gallons 662 liters

Flotation

Pontoons Four(4) pontoons, 34 in.x 34 in.x 144 in. 10 Ga steel 10 ga. bottom, internal bulkheads and stiffeners epoxy coated inside and outside.

Displacement 20,500 Lbs or 9,298 kg

Draft: 508 mm or 20 inches

Working Capacity Cut 96 in. wide x 22 in.

Production : up to 680 m3/hr water mixture at 20-30% max solids

Deep Working Depth: 6.7 m 22 feet

Hydraulic Systems

Pump: Fixed Displacement Hydraulic vane pump.

Capacity 100 gpm @ 2,000 psig Reservoir 24 liters 65 gallons Filtration 100% return flow through a 10 micron filter and 5% of flow through a secondary 1 micron filter with water removal capability.

Circuit#1 Dredge pump

Circuit#2 Cutter head, Boom,Winches. Relief Valve Settings Dredge pump 2,500 psig Accessories 2,900 psig

Cutter head Cutter bar: Diameter: 558.8 mm or 22 inches length: 2.43 m or 8 feet Drive Recessed hydraulic motor. Direct drive with no gear reduction. Cutter bar end opposite of the driver motor is supported by an oil lite lubricated tapered roller bearing. Speed Variable to 187 rpm Torque 12,000 in-Lbs. or 83.74 mpa

RWB Dredge Pump: Discharge Diameter 254 mm or 10 inches Suction Diameter 247.65 mm or 9.75 inches Impeller Diameter 438.15 mm or 17.25 inches Sphere Passage 152.4 mm or 6.0 inches Pump performance 4,000 gpm @ 80 ft. TDH (water) @ 975 rpm

Others Controls: Stick controls are provided in a heated, air conditioned cab.

Price: On Request

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us for further information   sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636   

Return to Listings

D2119

File No. D2119

 2011 Mudcat MC-910 Aluminum ENV Suction Dredge

Principal Dimensions and Characteristics

  • Custom Built in 2011
  • Length Over All: 11.62 m 38.11 feet
  • Width: 2.74 m 9 feet
  • Height Over All: 2.68 m 8.8 feet
  • Draft: 533.4 mm 21 inches
  • Floating Clearance: 1.80 m 5.9 feet
  • Fuel Capacity: 1,325 liters 350 gallons

Floatation

  • Pontoons – (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
  • .25” thick marine grade aluminum formed with Internal Bulkheads and Stiffeners:

Cutter Assembly

  • Auger: Diameter: 4.15 m 13.625 feet
  • Pitch: 279.4 mm 11 inches
  • Flighting: 9.53 mm 0.375 inches
  • Speed: Up to 100 RPM
  • Cutter Knives: 45 Detachable Heat-Treated Blades
  • Cutter Bars: 36 Detachable heat-Treated Blades
  • Auger Torque: 18,000 in. lbs.
  • Rotates to Cut Slope up to 45 degrees

Mud Shield

  • Stainless steel Hydraulic Adjustable: 482.6 x 482.6 mm 19 x 19 inches

Boom

  • Stainless steel tubular steel construction extendable to 38’ with additional floatation added

Working Capacity

  • Cut (width x max. depth): 2.74 m x 457.2 mm 9 feet x 18 inches
  • Maximum Digging Depth: 3.05 m 10 feet

Main Engine

  • Make/Model: Detroit Diesel / 6-71 RC
  • Power @ 1,800 RPM 130 kW 225 hp

Drive

  • Clutch – Manual, 14 inch (355.6 mm) Diameter Disc & Pressure Plate
  • Reduction – Gear Ratio: 1.55/1 – Drive Coupling Flex Type

Pump

  • Type: Centrifugal Closed Impeller
  • Impeller Diameter: 495.3 mm 19.5 inches
  • Suction Diameter: 203.2 mm 8 inches
  • Discharge Diameter: 152.4 mm 6 inches
  • Shaft Diameter: 73.03 mm 2.875 inches
  • Capacity: 2,000 GPM @ 1,160 RPM against 180′ Head
  • Material Removal (up to): 91.75 cubic meters/hr 120 cubic Yards/hr

Service

  • Capacity: 75 GPM @ 1,800 RPM
  • Water Pump Pressure: 80 PSI
  • Hydraulic System Dual Pumps Capacity Total: 30.5 GPM @ 1,800 RPM
  • Reservoir: 214 liters 47 gallons
  • Circuit One: Auger Drive
  • Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting

  • Auger: 3,000 PSI
  • Others: 1,800 PSI

Propulsion

  • Treble Sheave Hydraulic Winch
  • Traverse Speed – 50 FPM Maximum FWD & REV.
  • Average Cutting Speed – 8 to 12 FPM
  • Electrical System Voltage
  • Electrical System Voltage: 12 V
  • Alternator Output: 65 Amps
  • Batteries: 12 V, 205 Amps/hr, Parallel Wires
  • Average Cutting Speed: 8 to 12 FPM

Finish

  • Aluminum finish

Color

  • Aluminum finish

Located in Southern Ontario, Canada

Price: $315,000 CDN

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636  

Return to Listings