Tag Archives: pontoon dredge

D2119

File No. D2119

 2011 Mudcat MC-910 Aluminum ENV Suction Dredge

Principal Dimensions and Characteristics

  • Custom Built in 2011
  • Length Over All: 11.62 m 38.11 feet
  • Width: 2.74 m 9 feet
  • Height Over All: 2.68 m 8.8 feet
  • Draft: 533.4 mm 21 inches
  • Floating Clearance: 1.80 m 5.9 feet
  • Fuel Capacity: 1,325 liters 350 gallons

Floatation

  • Pontoons – (2) Two: 914.4 mm x 812.8 mm x 10.06 m 36 in. x 32 in. x 33 feet
  • .25” thick marine grade aluminum formed with Internal Bulkheads and Stiffeners:

Cutter Assembly

  • Auger: Diameter: 4.15 m 13.625 feet
  • Pitch: 279.4 mm 11 inches
  • Flighting: 9.53 mm 0.375 inches
  • Speed: Up to 100 RPM
  • Cutter Knives: 45 Detachable Heat-Treated Blades
  • Cutter Bars: 36 Detachable heat-Treated Blades
  • Auger Torque: 18,000 in. lbs.
  • Rotates to Cut Slope up to 45 degrees

Mud Shield

  • Stainless steel Hydraulic Adjustable: 482.6 x 482.6 mm 19 x 19 inches

Boom

  • Stainless steel tubular steel construction extendable to 38’ with additional floatation added

Working Capacity

  • Cut (width x max. depth): 2.74 m x 457.2 mm 9 feet x 18 inches
  • Maximum Digging Depth: 3.05 m 10 feet

Main Engine

  • Make/Model: Detroit Diesel / 6-71 RC
  • Power @ 1,800 RPM 130 kW 225 hp

Drive

  • Clutch – Manual, 14 inch (355.6 mm) Diameter Disc & Pressure Plate
  • Reduction – Gear Ratio: 1.55/1 – Drive Coupling Flex Type

Pump

  • Type: Centrifugal Closed Impeller
  • Impeller Diameter: 495.3 mm 19.5 inches
  • Suction Diameter: 203.2 mm 8 inches
  • Discharge Diameter: 152.4 mm 6 inches
  • Shaft Diameter: 73.03 mm 2.875 inches
  • Capacity: 2,000 GPM @ 1,160 RPM against 180′ Head
  • Material Removal (up to): 91.75 cubic meters/hr 120 cubic Yards/hr

Service

  • Capacity: 75 GPM @ 1,800 RPM
  • Water Pump Pressure: 80 PSI
  • Hydraulic System Dual Pumps Capacity Total: 30.5 GPM @ 1,800 RPM
  • Reservoir: 214 liters 47 gallons
  • Circuit One: Auger Drive
  • Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting

  • Auger: 3,000 PSI
  • Others: 1,800 PSI

Propulsion

  • Treble Sheave Hydraulic Winch
  • Traverse Speed – 50 FPM Maximum FWD & REV.
  • Average Cutting Speed – 8 to 12 FPM
  • Electrical System Voltage
  • Electrical System Voltage: 12 V
  • Alternator Output: 65 Amps
  • Batteries: 12 V, 205 Amps/hr, Parallel Wires
  • Average Cutting Speed: 8 to 12 FPM

Finish

  • Aluminum finish

Color

  • Aluminum finish

Located in Southern Ontario, Canada

Price: $315,000 CDN

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information    sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636  

Return to Listings