Tag Archives: suction dredge

D2138

D2138

2010 Portable Suction Dredge

  • Price: $147,000 CDN
  • Width: 8’6
  • Length: 26, Cutter Head 18′
  • Draft: 20″
  • 8″ Suction, 6″ Discharge
  • Both sides can discharge or can be discharged out stern valves on discharge lines
  • Digging depth approx 8′
  • Articulating cutter head – approx 6′ swing
  • Powered by a 4-53 GM
  • Located in Southern Ontario (Lake Erie area)

Details are deemed to be correct but are not guaranteed and should be independently verified

Please contact us for further information   sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636   

Return to Listings

D2137

D2137

10″ Suction Dredge

Length: 11.37 m or 37 feet

Width: 2.84 m or 9 feet

Height: 3.14 m or 10 feet

Weight: 17,000 lbs. or 7,711 Kg

Main Engine Make / Model: Cummins Diesel Model 5BTA 5.9 Power @ 2,500 rpm 129.75 kw 175 hp cylinders 6

Fuel Capacity: 175 gallons 662 liters

Flotation

Pontoons Four(4) pontoons, 34 in.x 34 in.x 144 in. 10 Ga steel 10 ga. bottom, internal bulkheads and stiffeners epoxy coated inside and outside.

Displacement 20,500 Lbs or 9,298 kg

Draft: 508 mm or 20 inches

Working Capacity Cut 96 in. wide x 22 in.

Production : up to 680 m3/hr water mixture at 20-30% max solids

Deep Working Depth: 6.7 m 22 feet

Hydraulic Systems

Pump: Fixed Displacement Hydraulic vane pump.

Capacity 100 gpm @ 2,000 psig Reservoir 24 liters 65 gallons Filtration 100% return flow through a 10 micron filter and 5% of flow through a secondary 1 micron filter with water removal capability.

Circuit#1 Dredge pump

Circuit#2 Cutter head, Boom,Winches. Relief Valve Settings Dredge pump 2,500 psig Accessories 2,900 psig

Cutter head Cutter bar: Diameter: 558.8 mm or 22 inches length: 2.43 m or 8 feet Drive Recessed hydraulic motor. Direct drive with no gear reduction. Cutter bar end opposite of the driver motor is supported by an oil lite lubricated tapered roller bearing. Speed Variable to 187 rpm Torque 12,000 in-Lbs. or 83.74 mpa

RWB Dredge Pump: Discharge Diameter 254 mm or 10 inches Suction Diameter 247.65 mm or 9.75 inches Impeller Diameter 438.15 mm or 17.25 inches Sphere Passage 152.4 mm or 6.0 inches Pump performance 4,000 gpm @ 80 ft. TDH (water) @ 975 rpm

Others Controls: Stick controls are provided in a heated, air conditioned cab.

Price: On Request

Details are deemed to be correctbut are not guaranteed and should be independently verified

Please contact us for further information   sms@scrutonmarine.com
Scruton Marine Inc.   Phone 519-583-1636   

Return to Listings