Tag Archives: mudcat auger dredge

D2120

File No. D2120

Mudcat MC915 Auger Dredge

Price: $132,500 CDN

Construction material – Steel

  • Length : 38’ 11″
  • Width : 9′ 0″
  • Height : O.A.8’8′
  • Weight : 21,000 lbs. & Dry
  • Draft : 21″
  • Floating Clearance : 6’9″
  • Fuel Capacity : 360 gallons
  • Pontoons : Two 36″ x 32″ x 330″

10 Gauge H.R. Steel with Internal Bulkheads and Stiffeners; formed for rigidity; polyurethane foam filled

  • Auger: Diameter 13-5/8″
  • Pitch : 11″
  • Flighting: 3/8″
  • Speed: Up to 100 RPM
  • Cutter Knives: 45 Detachable Heat-Treated Blades
  • Cutter Bars: 36 Detachable Heat-Treated Blades
  • Auger Torque; 16,500 in. lbs. Rotates to Cut Slope up to 45 degrees
  • 19″ x 9′ Hydraulically Adjustable Cut 9′ wide x 18″ maximum depth
  • Operating: Depth-15′ maximum
  • Detroit Diesel: 6-71 RC, 228 BHP @ 2100 RPM
  • Clutch—Manual: 14″ Dia. Disc & Pressure Plate
  • Reduction—Gear : Ratio 1.8/1—Drive Coupling Flex Type
  • Centrifugal Closed Impeller
  • Impeller Diameter: 19-1/2″
  • Suction Diameter: 8″
  • Discharge Diameter: 8″
  • Shaft Diameter: 2-7/8″
  • Capacity: 2000 GPM @ 1160 RPM against 180′ Head
  • Material Removal: To 120 Cu. yds./hr.
  • Capacity: 75 GPM @ 2800 RPM
  • Pressure: 80 PSI

Dual Pumps

  • Capacity Total: 30.5 GPM @ 1800 RPM
  • Reservoir : 47 Gallon
  • Circuit One:  Auger Drive
  • Circuit Two: Boom, Mud Shield and Winch

Relief Valve Setting:

  • Auger : 3000 PSI
  • Others: 1500 PSI

Treble Sheave Hydraulic Winch

  • Traverse Speed: 50 FPM Maximum Forward & Reverse
  • Average Cutting Speed: 8 to 12 FPM
  • Voltage: 12V
  • Alt. Output: 65 Ampere
  • Batteries: 12V, 205 Ampere Hour, Parallel Wired
  • Circuits: 2 Wire System Full Ground

Polyurethane finish coat on corrosion inhibitive epoxy primer

  • Standard Colors: Green and White

Located in Eastern Ontario, Canada