File No.A2073
1700’s1600 lbs Admiralty Long Shank Anchor
Salvaged from Penobscot Bay, Maine
Shank: 11′
Fluke to fluke:6′
Flukes: 18″wide x 24″ long
Square: 4 and1/2″ by 3 and 1/2″
Ring: 20″outside diameter
Estimated weight:1600 lbs
Located in Westbrook, CT
Price reduced from $8,400 USD to $5,250 USD
Additional information provided by the owner:
“This large anchor, salvaged from Penobscot Bay in Maine is of the Admiralty longshank design (as seen in the photos) dating back to the 1700’s. Note the long shank, straight arms which form a sharp angle at the crown and the large diameter ring. It has survived in good condition (typical of wrought iron) and is all intact except for approximately 20% of each fluke as seen in the photos. The flukes can be easily repaired, if desired, since the wrought iron material is very low in carbon and possesses excellent weldability.
The anchor is missing its wood stock but one can be readily be made, preferably from white oak if so desired. According to Anchors by N. E. Upham “this anchor would be the main bower anchor from a ship of approx 400 tons or the stream or kedge anchor from a much larger vessel.” It was made from a number of iron bars which were tied together, heated and then forged under a trip hammer into one bar to form the shank, arms, ring etc. These component parts were then welded together. The moderate degree of corrosion shows very nicely the forging process which is a truly a lost work of art.
Although of British design this anchor may be from a U.S. ship since the anchor design was copied and made in the U.S. Also the Penobscot Bay location where it was found was frequented by U.S. vessels, some of which were sunk there in the Revolutionary War.
This anchor has been out of the water for a long time and is completely stable from further corrosion. Because of its size and weight this anchor is offered for pickup only in Westbrook, CT. The price includes loading onto a trailer.”
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us forfurther information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
File No.A2059
Antique 10′ tall plus 20″ ring
8′ wide
Rod is 5′ long – other side is broken off
Shaft diameter 7 inch to 9 inch
Weight over 3500 lbs – bobcat cannot pick it off ground
Located in Ohio
Price $20,000 or best offer
Details are deemed to be correct but are not guaranteed and should be independently verified
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
File No. A2031
Anchor Chain – not presently available- check back later
- 1 3/8 2 shots total weight 3400 lbs estimated
- 1 5/8 13 shots total weight 32,500 lbs estimated
- Condition: Excellent, used, (little wear)
- Located in New Jersey, USA
- Price on request
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to Listings
Here are some of the anchors we currently have listed for sale. Use your mouse to click on the file number to see more details and in most cases a picture.
Head on over to the Subscribe Page if you would like updates on New or Updates on Listings in this section.
Subscribe Now
File No. | Dimensions | Description | Location | Price |
A2096 | 30kg | New Danforth Anchors, 30 kg galvanized steel | Port Dover, Ontario | $75 CDN each
Volume Discount Available
|
A2095 | 10'6 x 9' x 76" | Folding Stock Anchor Circa 1830, pulled from the Atlantic Ocean, professionally preserved, delivery available | Maryland | $11,000 USD |
A2094 | 6' x 4' | Baldt 29 Stockless Anchor w/Chain, weighs roughly 4,000 lbs | Ontario
(Near North Bay) | $7,000 CDN
New Listing! |
A2092 | 50" x 48" | Russel Bros Ltd. Fort Frances anchor, 250 lbs | Quebec | $800 CDN
NEW PRICE! |
A2091 | 6' x 64" | Russel Bros Ltd. Fort Frances, 450 lb anchor, comes with about 8' of chain | Ontario
(Northern) | $6,000 CDN |
A2089 | 10' x 11' | Antique Trotman Style Anchor | Ohio | $20,000 USD
obo |
| 6' x 6' | 1 Ship Anchor
Weighs about 4500 lb | Michigan | SOLD!
|
| 6' x 9' | Large folding stock anchor, 1850-1880, est. 1600 lbs, delivery available | Maryland | SOLD! |
A2068 | 59" x 60" x 43" | 19th Century Stock Anchor, weighs approx 250 lbs | Maryland | $3,360 USD |
A2085 | 48" x 52" x 30" | Anchor (age unknown)
48" tall
Retrieved from Cooper River in SC
Slightly bent
| North Carolina | $650 USD
|
A2083 | 6' x 6' | 6' x 6' 1840-1860 restored anchor with new white oak stock | Michigan | $5,200 USD |
A2071
| Weighs 200+ lbs
51" shank x 48" stock x 34" across flukes | Antique Kedge Anchor - from middle 1800's
| Scotland, UK | $950 USD |
| Wt: 750 lbs
Dimensions: 85" x 65" | 1944 85" x 65" US Navy Danforth Anchor
| New York State | SOLD! |
A2073
| Shank: 11' Fluke to fluke: 6'
Flukes: 18" wide x 24" long
Estimated weight: 1600 lbs | 1700's Admiralty Long Shank Anchor
Salvaged from Penobscot Bay, Maine
| Connecticut | Price reduced From $8,400 USD
To $5,250 USD |
A2059
| Weighs over 3500 lbs | Antique anchor- 10' tall x 8' wide
| Ohio | $21,000 US or best offer |
A2031
| 1 3/8” 2 shots total weight 3440 lb estimated
1 5/8” 13 shots total weight 32,500 lb estimated | Anchor Chain
| New Jersey | Not presently available - check back later |
| | | | |
Please contact us for further information sms@scrutonmarine.com
Scruton Marine Inc. Phone 519-583-1636
Return to index