File
No. T2326
NEW 2012 74' x 30' x 11' ABS 3200hp, 50tbp Tugboat
Ready
for delivery
Class: ABS,
Maltese Cross, A1 Harbor Towing, AMS
Hull designed & built in
accordance with ABS Rules for Ice Class D0
Delivery date:
End of March, 2012
Length: 74'
(22.6m)
Beam: 30' (9.1m)
Depth:
13'3" (4.0m)
Draft: 11'
(3.3m)
Tonnage: (US
Reg): Under 100 gross tons
Bollard Pull: 50
short tons/ 100,000 lbs (estimated)
Free Running
Speed: 12 knots
Engines: Two (2)
Cummins QSK50, 1600 hp @ 1800 rpm
(3,200 hp total) Tier II Certified
Gears: Two (2)
Twin Disc MG5600 6.04:1 ratio
with continuous duty rating of
1898hp
Propulsion:
Two (2) 80"
diameter x 87" pitch Kaplan-type 4-blade Rice "Aqualloy"
propellers, inside Type 37, stainless steel lined, kort nozzles manufactured by
Custom Nozzle Fabricators.
Steering:
Hydraulic (HPU)
steering system manufactured by Gulf Coast Hydraulics, driving twin rudders
behind each propeller. Jastram
Engineering control system with a primary Full Follow-up system and a back-up
Non-follow-up system.
Generator Sets:
Two (2) 65 KW Onan/Cummins diesel generators
Pumps: One (1) bilge/ballast pump, one (1) fire and
general service pump,
one (1) fuel oil pump, two (2) fresh
water pumps/pressure sets,
one (1) dirty oil pump, one (1)
sewage macerator pump
Air Compressors:
One (1) small air compressor for "shop" service
Engine Cooling:
The main/auxiliary engines and gears are cooled by engine
raw water pumps through heat exchangers.
Oily Water
Separator: One (1) Heli-Sep Model 500, for use with 300 gallon waste oil
storage tank.
Off-Ship
Fire-fighting: A single monitor, with a nominal capacity of 2,000 gpm, fitted
forward for fighting off-ship fires. Sea
water for the monitor is supplied by a dedicated fire pump driven by one of the
diesel generators.
Towing Winch:
the Aft Towing Winch is a Jon-Rie Intertech Series 500, with a capacity of 2000
-ft of 1 3/4" Dia. Hawser. The winch produces a line pull of 70,000 lbs,.
a line speed of 30 FPM and a brake holding force of 265,0000 lbs.
The hydraulic
motor is furnished complete with a re-circulation (free-wheel) valve, which
will free-wheel at a line pull of approx 75,000 lbs in neutral position (if the
winch is overhauled) and 10,000lbs in the emergency release (abort) mode.
Tank capacities:
Fuel: 26,796 gal
Potable water: 1,855
gal
Lube oil: 500 gal
Hydraulic oil: 55 gal
Ballast: 6,449 gal
Endurance:
Seven (7) to ten (10) days
Crew
Requirement: Two (2) (Licensed Captain, plus one)
Accommodations:
Three (3) cabins with berthing for five (5) or six (6)
MSD:
Owens Kleen Tank Model B-SS, Type II, Marine Sanitation Device, and USCG/IMO
certified with additional 300 gallon sewage holding tank.
Wheelhouse
Electronics:
One (1) Furuno radar small w 6' Array
One (1) Furuno radar large w 6' Array
One (1) Color Depth Sounder
One (1) Nav Tech GPS with Chart Plotter
One (1) Simrad Autopilot
One (1) AIS Unit
One (1) Furuno GPS Receiver
One (1) Furuno Satellite Compass
One (1) Loudhailer with Fwd & Aft Deck & Galley speakers
Two (2) Icom VHF Radios
One (1) Magnetic Compass meeting USCG
requirements w/correction card
One (1) Wind Speed/Direction Indicator &
Weather Station
One (1) EPIRB
Alarm
& Monitoring: Techsol Integrated engine room monitoring and alarm system
Purpose:
Harbor Assist. Coastal Ocean Towing, Marine Construction
Ready
to go to work
Located
in the state of Ohio, USA
Price:
$4,556,962 USD
Details are deemed to be
correct but are not guaranteed and should be independently verified.
Please contact us for
further information
sms@scrutonmarine.com
Scruton Marine
Services Phone 519-583-1636 Fax 519-583-2189