File No. P2058
Proposed 60’ x 14’ Houseboat
Built with state-of-the-art ocean proven
technology.
To be built with epoxy composites and a new 100%
plastic building material with excellent structural properties. Besides being very, very difficult to damage
it also weathers extremely well. These
boats are close to maintenance-free; the cabin roof should be painted once
every 5 – 6 years at a cost of $200 with a good quality 2 part polyurethane
paint. Every structural item on the
vessel is either intrinsically waterproof or is sealed in epoxy with makes it
100% waterproof. Every part of the boat
below the underdeck is plastic or epoxy/fiberglass.
Overall length: 60’
Overall beam: 14’
Sleeping capacity: 14
Cabin beam: 12’9”
Headroom: 7’0”
Foredeck: 8’0”
Overall height: 11’10”
Draft: 12”
Weight lightship: 16 tons
Deck Structure: 14’ x 15” WEST-System engineered trusses on 24”cc
3”H x 2”W
longitudinals on 12” cc on top and bottom of trusses
All plastic exterior deck
(optionally in interior in lieu of carpeting)
Hull Structure: All-plastic
frames on 24” cc sheathed on sides & bottom with plastic
Hull interior space filled 100% with epoxy-sealed
foam (waterproof)
Except where fresh, grey and blackwater tanks are
located
Interior: Mahogany plywood heavily sealed with fireproof paint
and trimmed
With
eastern cedar. Optional all-cedar or
partially wooded interior.
Different species
available.
Power: Standard pkg is 4.3 Litre Volvo stern drive
with dual station controls
(single lever MMC
controls) 2 epoxy/fiberglass fuel tanks (100 gal
each) well isolated from
hull.
Electricity: 3000 watt Honda generator with safe exhaust system
and all wiring
Installed. All lighting marine grade.
Galley: U-shaped galley counter with cupboards. Dinette sits 6 – 8 and
Converts to bed
Drinking Water: Two 125 imp gal SS tanks
(total is 250 gal)
Grey
Water: 160 imp gal epoxy/fiberglass
tank
Blackwater: 160 gal epoxy/fiberglass tank
Bathrooms: Two bathrooms with top-quality low-flush porcelain
toilets.
One with shower.
Staterooms: Two, with queen-size beds
Propane System installed with all safety features
Wall/Roof insulation
Lifelines: 36” stanchions and
wrap-around toprail and 4 gates are
1” #316 SS with lines on
9” cc
Price does not include 2 sofa-beds, propane range and
refrigerator, mocrowave
or mattresses and bedding
Price: $158,000 fob New Brunswick, Canada
Please contact us for further information sms@scrutonmarine.com
Scruton
Marine Services Phone 519-583-1636 Fax 519-583-2189