LANDING CRAFTS
Here are some of the landing landing crafts we currently have for sale. Use your
mouse to
click on the number to see more details and in most cases a picture.
|
File # |
Dimensions |
Notes |
Price |
|
119' x 34' x
5'
|
1954/2011 EX Army Reserve LCU
Landing
Craft 1466 Class ABS registered in 2012 US Coast Guard documented for
Coastwise use Gross tonnage: 217 tons Net tonnage: 183 tons Front gate: 14'4" wide (2) 40' spuds with winches (2) 6V71 Detroits
- 233 hp ea
With Twin Disc MG506 3:1 gears (1) 6V92 Detroit (centre engine)
- 270 hp with Allison 3:1
gear (3) 38" 4 blade props (4) Diesel gensets Capacity: 200 tons Speed: 6.5 knots Fuel capacity: 3000 gal On board welder Fresh paint above waterline Located in California |
Price
reduced to $795,000 USD |
|
|
74' x 22' x 4'
Photo not available |
1987 Bender Steel LCM8 Landing Craft
With hydraulic bow ramp Gross tonnage: 95 ton Net tonnage: 76 tons Built by Bender
Shipbuilding, Alabama Shell plate thickness:
1/4" (2) 12V-71 Detroit Diesel
engines Fuel capacity: 1000 gal Located in Thousand Island area of
New York State |
$351,750 USD |
|
|
74' x 21' x 5'
|
1968 Aluminum Landing Craft
Had 6-71 Detroit Diesel twin-packs Built in Marinette, WI Gross tonnage: 97 tons Net tonnage: 78 tons Fuel capacity: 600 gal Landing craft is ready to be repowered Being sold as is where is Located in Maryland, USA |
$152,250 USD |
|
|
56' x 14' x 3.5'
|
1945 Steel LCM6 Landing Craft c/w Aqua Life Harvester (Fish Pump)Gross tonnage: 29 tons Net tonnage: 23 tons Twin 6-71 Detroit Diesel
engines Cruising speed: about 9
knots Hydraulic steering 90 Perkins 30 KW
Generator Located in Maine |
$50,000
USD for the landing craft with fish
pump ----------- Landing craft
without fish pump $31,500 |
|
|
52’
x 14’ x 5’ |
Steel
Landing craft/cargo Twin
GM 6-71 Located
in Ontario, Canada |
$89,000 USD |
|
|
45'
x 14'8" x 5'
|
(2)
1974 Aluminum Larc XV Twin
300hp Cummins engines Speed:
9.5 knots sea 30 mph land Two
similar vessels available Located
in New York State |
$57,000 USD each |
|
|
40'
x 142"
|
New Aluminum Rear Cabin Landing
Craft - (3) independent air chambers Twin 300hp 4 stroke Suzuki outboards 3600 LP Onan
Generator Commercial RV rooftop AC Enclosed 144"L x 100"W x
8'H cabin Hydraulic bow gate Located in Missouri Please see listing for more
information |
New
Price $220,000 USD |
|
|
11.63m 3.8m x 4.2m (molded
depth)
|
2009
Amphibious 48 PAX Landing Craft /Work Boat
- LARC Type Built in Ireland
of marine grade aluminum Licenced to carry 48 passengers or cargo It has 6
sealed compartments below deck Engine:
Perkins Model1106D 175 hp Cruising
speed: 5 knots Can drive up
on a beach Can be
transported by road Located in
Ireland "This is not a "Duck" It can go up on a beach
and is working on gravel, mud, sand beach at the moment. This is a robust estuary/river/coastal
vessel that has a safety stability book with a high specification hydraulic drive." |
Price
on request |
|
|
36' x 10'
|
1966 LCVP
Fiberglass Landing Craft W/ Armor
plating Armor plating
partially removed 6-71 Detroit
c/w manual 1.5:1 gear Located in
Ohio |
Price
for quick sale $1,575
USD |
|
|
35'
x 10'10" x 3'
|
1967
Fiberglass Landing with Steel Ramp & Armor Plating 120
hp 6 cyl Ford Lehman Diesel Used
during summer of 2011 Ready
to go Located
in Michigan |
$14,700
USD |
|
|
33'
x 11'
|
New
Aluminum Landing Craft Enclosed 5' x 6' wheelhouses and push
knees Set up for outboard power - single or
twins Sold without power New aluminum I-Beam trailer also
available Located in Ontario |
$103,500 CDN |
|
|
33'
x 11'
|
New
Aluminum Landing Craft - to be built Powered
by I/O diesel engines Engines
can be cooled by keel coolers or radiators on the roof. Can
be powered by outboards. Wheelhouse
is 6' x 6' Gate
is 7' wide by 4' long This
type of landing craft work boat can be customized to suit buyers needs. Built
in Ontario, Canada A
photo of similar LC is shown on listing. |
Price on
request |
|
|
33'
x 11'
|
New
Aluminum Landing Craft -
in process of being built Set
up for single or twin outboards No
helm installed yet Can be CC, SC or any size wheelhouse Ready to go 2 weeks after ordered Located in Ontario |
Price on
request |
|
|
33’
x 10’3”
|
New
Steel Landing Craft/Barge - under construction Front
door 6’ wide Capacity
10,000 lbs Weight
6,500 lbs plus power Power
option outboard or I/O Built in Southern Ontario Photos
have been added to listing ---------------------------------- Owner has a used stern drive 190 hp
Mercury GMC engine – 196 hours
since new with power steering/ panel/ controls /fuel tank/battery for sale
for additional price |
Price
on request |
|
|
26'
x 9'
|
2015 Model
Aluminum Landing Craft
3 wks to completion - needs
glass & rigging 1/4" bottom, 3/8" sides and deck Hydraulic steering Set up for single outboard Being sold completed without power Located in Ontario |
$53,900 CDN Plus power Plus available options |
|
|
26’
x 8’10” 4’
sides
|
New
Construction Aluminum
Landing Crafts Built
in Oregon, USA |
Prices
on request |
|
|
26' x
8'6"
|
2015 Aluminum
Landing Craft -
To be built Heavily built Overall
length: 26' Sides are 3'
high Manual or hydraulic
steering Self bailing
deck Manual bow
gate (Hydraulic bow
gate available) Sold with or
without an engine Built in
Missouri |
To
be built Price on
request |
|
|
22' x
9'6"
|
2005 Aluminum
Landing Craft With fully
enclosed wheelhouse 135 hp Evinrude outboard Aluminum
I-Beam trailer available Located in
Ontario, Canada |
$56,000 CDN |
|
|
20' x 8'
|
New Aluminum
Barge c/w Drop Gate --- To be
built 150 hp Yamaha
or similar engine Built in Ontario |
Price on
request |
|
|
|
|
|
|
Please
contact us for further information sms@scrutonmarine.com
Scruton Marine Services
Phone 519-583-1636 Fax
519-583-2189
